Agriculture Attachments Equipment For Agriculture Management Available In Massachusetts
-
PremiumManufactured by Feucht Obsttechnik GmbHbased in GERMANY
Clearing of fruit from drive paths. The Front Sweeper Professional is a tractor attachment with which drive paths can be cleared. During this process, the fruit is swept away to the left and right. Then other harvesting aids such as trunk shakers can be used to shake off the fruit or tractors with trailers to collect the harvested ...
-
Manufactured by TMC Cancelabased in SPAIN
Mechanical Power (HP): 90 - 300. Working Width (CM): 160-180-200. Weight (KG): 930-1106-1152 / 1115-1224-1396. Nr. of Rotors: ...
-
Manufactured by RATH Maschinenbased in AUSTRIA
Rough designed tool-heads with height adjustable supporting wheel, with up to 7 infinitely adjustable tines, working width 25 cm till 1,5 ...
-
Manufactured by J Bar Manufacturing Corp.based in USA
This cutter has the same round Blade Master and 3/16" 7 gauge steel deck as the Heavy Duty model.. Heavy duty easy pin adjustment tail wheel assembly. Packed rubber laminated tail wheel. Square tubing back brace. 4 inch A-frames. 5 ft. with 40 HP gearbox, shear pin PTO, PTO shaft included --5ft. & 6ft. available with 75 HP gearbox featuring a heavier duty PTO shaft with bolt-on slip ...
-
Manufactured by Construction Implements Depot, Inc. (CID)based in USA
CID compact tractor pallet forks & frame are designed specifically for compact tractors. A lightweight frame offers 2000 lb. load capacity. Fork tines are 42” in length, while see through visibility eases tine placement. Hooking up is fast and convenient with a universal skid steer ...
-
Manufactured by ARB ATTACHMENTbased in INDIA
Tractor pto attached. 60 hp tractor required as per field condition. Bin loading by separate tractor, with bin loader needed. Cut, clean & ...
-
Manufactured by Hardee By EVH Manufacturing Company, LLCbased in USA
All cutters are equipped with Heavy Duty 540 RPM 40 H.P. Gearbox, Round Blade Carrier, and Laminated Tail ...
-
Manufactured by TMC Cancelabased in SPAIN
The D1, D2 and D3 rotary brush cutters are the perfect complement to tractors of low and medium power for agricultural use. Tremendously versatile, they give the users an incredible experience for the cleaning and maintenance of plantations and other crops, both in features and performance. The main structure is designed so that it combines high strength and light weight, achieving very ...
-
Manufactured by LAGARDEbased in FRANCE
Maintenance under fences makes it possible to preserve the protection perimeter for livestock, crops or sensitive areas such as watercourses. It also contributes, by avoiding invasion by brambles, shrubs or branches, to the preservation of useful agricultural land. The S1 rotary cutter, thanks to its large cutting width, its adjustable bypass pressure, its 900 mm wide cutting head which fits the ...
-
Manufactured by Farm Implements (India) Pvt. Ltdbased in INDIA
SUGAR CANE PLANTER is an equipment attached to tractor. Full size of the cane is fed by the operator and it automatically cut the sett. On levelled filed it will form a hurrow, palce the sett as per required space and cover sett with soil will be done in single pass. 2 ROW and 3 ROW planters are availble. Tractor PTO operated planters also ...
-
Manufactured by BCS Groupbased in ITALY
The lawn mower is theideal implement for mowing lawns in green areas, public and private parks, gardens and sports ...
-
Manufactured by Accurate Engineering Group (AEG)based in INDIA
Agricultural equipment ...
-
Manufactured by BCS Groupbased in ITALY
The GroundBlaster rotary plough solves the problem of ploughing and subsequent rotary hoeing, incorporating the two operations in a single passage, leaving the soil ready for ...
-
Manufactured by King Kutter Inc.based in USA
KING KUTTER'S DIRT SCOOP fits a standard three-point hitch tractor. Adjustments in the pitch for digging are made at the top link. It features a uniquely designed heavy duty angle iron frame. The reversible mounting allows you to attach your tractor to the front or the rear of the scoop, enabling it to work forward as a slip scraper or in reverse as a shovel. This versatile dirt scoop also has a ...
-
Manufactured by Premier Attachmentsbased in USA
The DL-72 is a heavy duty rotary cutter built to handle extreme brush cutting jobs. A reinforced front push bar enables the operator to push over trees and cut brush up to 6 ' in diameter. The DL-72 is built to fit any skid loader running 22 to 40 gpm. As you cut, the front chained intake door lifts and allows the tree to enter the blade area. There are no void areas on the underside of the deck ...
-
Manufactured by Rhino - a registered trademark of the Alamo Group Inc.based in USA
The sleek lines of the 75C make it an outstanding match for compact tractors ranging from 25 to 45 PTO HP. With more than 2,800 pounds of bucket digging force and 90” dig depth, the 75C is a lot more than just pretty lines. It gets the job done quickly! The 75C can be mounted on a sub-frame for quick installation and removal or with 3-point brackets, adding to its ...
-
Manufactured by TMC Cancelabased in SPAIN
The D1, D2 and D3 rotary brush cutters are the perfect complement to tractors of low and medium power for agricultural use. Tremendously versatile, they give the users an incredible experience for the cleaning and maintenance of plantations and other crops, both in features and performance. The main structure is designed so that it combines high strength and light weight, achieving very ...
-
Manufactured by Fornasier Cesare & C. sncbased in ITALY
The Roller Trimmer, as the name suggests, consists of a pair of rollers which rotate hydraulically and pull the shoots up to the adjustable level of a six-blade cutting disc. The counter-blade stops the shoots from being frayed. The material that has been cut falls directly onto the ground. The trimmer comes in versions with one, two, three or four rows fitted to the front or the back of the ...
-
Manufactured by Major Equipment International USAbased in USA
When looking for a versatile, hardworking machine, look no further than the award-winning Cyclone Rotary Cutter. This heavy duty machine has similar mulching capabilities of a flail mower but with much less power requirements and faster forward working speeds. From traditional pasture topping to clearing crop stubble, these machines are equally at home in set aside acres, forestry margin ...
-
Manufactured by Mandako Agri Marketing Inc.based in CANADA
Take your rotary cutter to new lengths with the REDDI-ARM by Mandako. The REDDI-ARM’s unique 3-point hookup stabilizes the unit while reducing drag on the tractor. The sloped driveline creates optimal visibility while reducing operator ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you