Agriculture Equipment (Agriculture Products) Equipment
-
Manufactured by Bellon Mitbased in ITALY
with a 3-point hitch Cat. I or II. Its compact design reduces significantly all contingent bumps making the shredder nimble and reactive, providing a fast and optimum performance in any condition. This machine is extremely versatile and can be accessorized with many different tools for nearly any endeavor. The shredder TTB is equipped with a leading ...
-
Manufactured by Bellon Mitbased in ITALY
the shredder nimble and reactive, providing a fast and optimum performance in any condition. This model is equipped with a leading oil-bath gear drive and a secondary belt drive, so that it requires a very low maintenance which can be reduced to a periodic check of the oil level, of the chains and of the ...
-
Manufactured by Asthorbased in SPAIN
Asthor ventilations whether manually handled or automated, let us achieve an appropriate temperature and humidity: Roof ventilations: Simple of ¼ bay or ½ bay, double up to 45%. Front and lateral ventilations. Roll-up, folding or guillotine ventilations. The horizontal airflow fans can reduce the inside humidity, lower the temperature and get more uniform temperature and humidity ...
-
Manufactured by Bellon Mitbased in ITALY
for the maintenance on difficult surfaces like brushwood, orchards, vineyards etc. Due to the equipped free-wheel transmission in oil-bath, maintenance on this machine can be reduced to a periodic check of the oil level and of the ...
-
Manufactured by Bellon Mitbased in ITALY
and reactive, providing a fast and optimum performance in any condition. This machine is extremely versatile and can be accessorized with many different tools for nearly any endeavor. The shredder TTC is equipped with a leading free-wheel transmission in oil-bath and a secondary belt drive, so that it requires a very low maintenance which can be ...
-
Manufactured by Waller Watsonbased in UNITED KINGDOM
All Watson Cambridge Rollers use a 65mm high grade axle (EN16T) so allowing the use of a large triple seal self-aligning steel bearing. Oversized pivot pins and greasable bushes are used at every pivot point making this an extremely robust cultivation machine. Folding and unfolding is possible from the tractor seat using the tractor hydraulics. Use of the Shatter Boards is also hydraulically ...
-
Manufactured by Giunti SpAbased in ITALY
The Anfor joint is mainly used in Europe and Canada. It is used especially in industrial fields because it can be made with diameters up to 400 millimeters. Thanks to its remarkable capacities it is used for conveying sludge, high content of solid material substances, dusts and ...
-
Manufactured by Giunti SpAbased in ITALY
The hydraulic coupling is perhaps the most ancient system of coupling but it is the less used nowadays. Its presence in the market is limited to replacements or extensions in old ...
-
Manufactured by Giunti SpAbased in ITALY
In the 50s the famous Italian firm Mellini and Martignoni starts to distribute its quick joint for irrigation, which is now very well received by the agricultural holdings in Europe, Africa and South America. Subsequently, all the the joint Mellini rights were acquired by Giunti SpA, which renames it Robur. Today the name Robur has spread to ...
-
Manufactured by Giunti SpAbased in ITALY
Spherical joint Ferrari is one of the first pipe coupling systems developed for agricultural irrigation, immediately after the introduction of the hydraulic type. It is a good compromise between performances (in terms of working pressures) and cost. It is recognized as the ideal junction in mobile networks of sprinkler irrigation (full ...
-
Manufactured by Giunti SpAbased in ITALY
The small self-propelled sprinkler RollcarT is widely used in large green areas such as gardens, sports fields and whatever else needs a practical, fast and economical similar-sized ...
-
Manufactured by RCM srlbased in ITALY
It is applied to the three point lifting of the all-purpose tractors and it is actioned by the power takeoff with cardan ...
-
Manufactured by Zenport Industriesbased in USA
Zenport Long Reach ePruner LEP1 858 99.5-inch Long Reach Battery Powered Pruner, 10-Hour, 10000 1.25 Inch Cuts. The newest and lightest electric pruner technology from Zenport ...
-
Distributed by Blanchard Machinery Companybased in USA
When you need high horsepower with excellent support, Challenger agricultural equipment and products fit the bill. For more than 20 years, Challenger tractors have provided agricultural and farming customers with superior technology, productivity, and ...
-
Manufactured by Tucker Sno-Cat Corporationbased in USA
The Model 1600AG Tucker-Terra agricultural vehicle is the perfect solution for light weight, low ground pressure, non-intrusive agricultural equipment applications. It can be fitted with a variety of special options for aggricultural work. View the agricultural page for more information about agricultural ...
-
Manufactured by Hexagon Agriculture - part of HEXAGONbased in BRAZIL
The Auto Steering system, developed to improve performance and operation precision, aids navigation and can be fully integrated with other functions of Hexagon’s precision agriculture ...
-
based in INDIA
Inter Cultivators Manufacturers India Rekha Agriplas Limited is one of the leading manufacturers and suppliers of Inter Cultivators in India. Inter cultivators are efficient agricultural equipments which is widely used for dividing different plantation crops like sugarcane, paddy, cotton. We manufacture this agricultural ...
-
Manufactured by Perry of Oakley Ltdbased in UNITED KINGDOM
These conveyors have been designed to fill a gap in the market. They have been purposfully built for customers who require higher capacities than standard agricultural equipment or have a higher annual throughput, but they don't require the very high capacity or specification of fully industrialised equipment. These chain and flight ...
-
Manufactured by Quality Irrigationbased in USA
agricultural irrigation equipment ...
-
Manufactured by HEF Groupebased in FRANCE
PEL bushings have an excellent resistance to wear and seizure thanks to the combination of a duplex surface treatment and a special surface topography. This cross hatching topography provides grease reservoirs in the loaded area and enables removing of abrasive particles. They are appropriated to work in severe working conditions: high pressure, abrasion, shocks and corrosion. PEL LV bushings are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you