Cultivator (Farm Equipment) Equipment
-
Manufactured by TAD-LENbased in POLAND
Length mm 1370. Width mm 3000. Height mm ...
-
Manufactured by Panagrotiki S.A.based in GREECE
The EP Cultivator can perform a perfect complete weeding in ranges of vineyards and orchards, with stony ground and even in very close plant ...
-
Manufactured by CMN Maskintec A/Sbased in DENMARK
With the CMN cultivator you can handle both the easy and diffucult tasks within cleaning of row crops. The cultivator is available both for front-mounting and rear-mounting og covers any row distance between 20 – 75 cm. By mounting the CMN cultivator onto the cleaner you ensure a more effective drying of the uprooted ...
-
Manufactured by Pleasant Valley Trailersbased in CANADA
12″ spacing, 3 point ...
-
Manufactured by Farmet a. s.based in CZECH REPUBLIC
Cultivator Verso is especially suitable for pre-sowing preparation of the soil after ploughing or stubble-breaking. It levels the soil surface and prepares the sowing bed. It also ensures excellent passability under heavier and wet conditions. It is resistant to rolling up and congestion with a high levelling effect. It is also suitable for ...
-
Manufactured by Agrotis S.A.based in GREECE
Spiral cultivator is ideal for working in grounds with heavy soil and for breaking the big clods into pieces, which are usually formed after plough use. The springs used (25x25, 30x30 & 35x35) in combination with the strengthened frame enable it to work with higher speed and achieve uniform soil ...
-
Manufactured by Agrotis S.A.based in GREECE
Vibro cultivator flex is ideal for fast, easy and cost efficient preparation of soil. With the strengthened frame and the flex-pall springs, which are the most powerfull in their category, it can even succeed in the strongest grounds. The work is completed by the double serrated rollers with hydraulic or mechanical regulation that set the ...
-
Manufactured by P.P.H. Agro-Factory IIbased in POLAND
THOR AT Disc cultivator is designed for soil cultivation. The operation of disc cultivator is performed by two rows of offset discs, which arrangement causes aggressive cutting through the entire soil during the pass. It can be used for cultivation of the soil with well-crushed crop residues and short stubble field. It can ...
-
Manufactured by Perrein SASbased in FRANCE
Don’t lose time and work in all conditions, the Cultipass cultivator and its Quick Roller Swap system is available! Cultipass can operate at shallow or deep depth, always with a high quality result. The patented Quick Roller Swap system allows you to always have the right roller whatever the soil / weather / crop ...
-
Manufactured by CMN Maskintec A/Sbased in DENMARK
CMN straw cultivator – The efficient solution against seed weed and to activate the germination of waste seeds, as well as an effective distribution and moulding down of cut straw. Another positive side effect is the reduction of snails. The CMN straw cultivator is available with fixed tines or variable tine-angle, both models are ...
-
Manufactured by Farmet a. s.based in CZECH REPUBLIC
Krtek is especially suitable for deep cultivation of compacted and impermeable layer of soil. It significantly improves absorption of compacted and wet soil. Loosening of subsoil layer is performed without risk of mixing of biologically inactive soil with ...
-
Manufactured by OPaLL-AGRI, s.r.obased in CZECH REPUBLIC
Combined cultivators NEPTUN-SATURN IV are machines with unique technology of the arrangement of working parts to create a precise seedbed. The ingenious concept is suitable for any type of soil thanks to a wide range of equipment and ...
-
Manufactured by Väderstad ABbased in SWEDEN
High capacity - low draught requirement: Swift is a trailed tine cultivator, designed to perform at peak level in both wet and dry years. The models in the product family span from 4.0 to 8.7 metre working width. You benefit from a spacious design, which can handle large quantities of crop residues. The narrow tine spacing ...
-
Manufactured by OPaLL-AGRI, s.r.obased in CZECH REPUBLIC
The NEPTUN-MERKUR IV cultivator is designed for soil cultivation after the harvesting of cereals and preparation for harvesting the intercrop. It is also suitable after harvesting sugar beet, corn and pre-crops, when there is not enough time for classic ploughing. After harvesting, it is used for stubble cultivation, ploughing in dung, ...
-
Manufactured by UNIA by Panagroteh Romaniabased in ROMANIA
KOMBI; suspension axle with clamp, ø60-825/ø28 mm. front string roller, ø320 mm. 4 rows of SV spring tines (32×12 mm) with variable adjustment of working depth. double string toothed roller, ø320/280 mm with pressure control. rigid ...
-
Manufactured by Agroremproject -98 JSCobased in BULGARIA
They are designed ( serving as an intermediate part ) for combining together several agricultural machines from the same type, with the intention to effectivelly use the drawing effort of the tractor and increase the working width. It is also possible that other types of agricultural equipment are attached, different from the above stated, in case that they do not violate the agro-technical ...
-
Manufactured by Pastò Elia & C. S.n.c.based in ITALY
The combined cultivators of the JUNIOR Series are the high-quality solution for the preparation and cultivation of the soil. The power and hardness of this agricultural machine make it an essential tool, capable of roughing out, leveling, fragmenting and filling the crops and vegetable remains. They are provided with a coupling hook. ...
-
Manufactured by John Berends Implements Pty Ltdbased in AUSTRALIA
S tines are one of the most versatile and valuable machines a farmer can own. It can be used from primary cultivation to creating a seed ...
-
Manufactured by P.P.H. Agro-Factory IIbased in POLAND
THOR BT Disc cultivator is designed for soil cultivation. The operation of disc cultivator is performed by two rows of offset discs, which arrangement causes aggressive cutting through the entire soil during the pass. It can be used for cultivation of the soil with well-crushed crop residues and short stubble field. Rotating ...
-
Manufactured by OPaLL-AGRI, s.r.obased in CZECH REPUBLIC
The three-row tine cultivator TRITON II is designed for wide range of working operations from stubble cultivation to deep loosening. Flexible duckfoot shares allow the soil to be processed at different depths with varying intensity of the soil loosening. The TRITON ii processes the soil in the range of 8-28 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you