Agriculture Management Equipment Near Taiwan
-
Manufactured by Dynamax Incbased in USA
The FLGS-TDP XM1000 system is a complete CR1000 based logger system for 32 TDP probes. The CR1000 is housed in a weather-resistant enclosure while collecting data under extremely harsh conditions. The AM16/32 Relay Multiplexer increases the number of sensors that may be scanned by the CR1000 data ...
-
PremiumManufactured by AMS, Inc.based in USA
Being able to replace the tip of your soil probe is a convenient and economic way to increase the lifespan of your equipment. AMS replaceable tip soil probes are a popular choice among agronomists, soil scientists, environmental consultants, and farmers. AMS offers several different replacement tip options that allow you to sample in a variety of soil conditions more efficiently. You can increase ...
-
PremiumManufactured by AMS, Inc.based in USA
Combination Edelman Augers are used in a variety of soil conditions. They retain sandy material well, and more cohesive mud and clay soils can be easily removed from the body. A One-Piece Combination Edelman Auger is also ...
-
PremiumManufactured by AMS, Inc.based in USA
The Brown Moisture Probe allows you to determine moisture depth quickly and easily. Agronomists and farmers use it to determine the depth of moisture following irrigation. This 43" Probe has an auger tip and depth markings at 1', 2', and 3' from the tip. The Probe is pushed into the soil using the attached 10" Rubber-Gripped Handle. It will easily penetrate saturated soils, but not dry soils. At ...
-
PremiumManufactured by AMS, Inc.based in USA
The 2-3/4" X 3' One-Piece Combination Edelman Auger is capable of augering down to 3'. The attached 16" Rubber-Gripped Cross Handle is welded to the steel shaft which is also welded to an Eijkelkamp Combination Edelman Auger Head. It is versatile, lightweight, and easy to use. It requires no assembly in the field and works well in a variety of soil conditions. The One-Piece Combination Edelman ...
-
Manufactured by METER Group, Inc.based in USA
Low cost, weatherproof radiometer: The Spectral Reflectance Sensor (SRS) is a matchbox-sized, multiband radiometer that can be mounted on a fence post, tripod, or meteorological tower. It’s inexpensive enough to deploy multiple sensors simultaneously. And it’s rugged enough to leave in the field for an entire growing season, or ...
-
Manufactured by METER Group, Inc.based in USA
Measuring canopy density can be problematic: There are several methods to measure how much light is intercepted by a canopy in order to determine if water loss is from evaporation or transpiration. There’s the hard way. There’s the expensive way. And then there’s the smart way: the ...
-
Manufactured by A/S Cimbria - part of AGCO Corporationbased in DENMARK
High capacity, high efficiency and low cost technology for heat treatment to increase the nutritional value of feedstuff.Like Expanders, Extruders and Micronizers the Cimbria “Dantoaster” Feed Processor is specially developed for heat treatment of free flowing, mainly organic granules. The purpose of heat treatment is to improve the quality and nutritional value of a product. Adding a ...
-
Manufactured by METER Group, Inc.based in USA
The trouble with moisture release curves: Measuring soil water potential to create a moisture release curve has always been tricky. Even if you’re an expert at traditional methods, these measurements require a tremendous amount of work. Plus, you still face limitations—like a lack of data points—that affect the final result. Some methods take several months just to complete a ...
-
Manufactured by Dynamax Incbased in USA
The Dynagage Flow32-1K Sap Flow system and Dynagage sensors have been servicing research plant scientists throughout the world for over 10 years. The Flow32-1K software makes working with Flow32-1K sap flow system easier than ever before with built-in algorithms for efficient and faster data analysis. New powerful functions include auto-zero and sensor status built into the datalogger program. ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine crop yield goals, planting decisions, irrigation water ...
-
Manufactured by A/S Cimbria - part of AGCO Corporationbased in DENMARK
The Cimbria Contec screw conveyors are designed for efficient and reliable transport of a wide range of agricultural and industrial products. The screw conveyor construction consists of inlet and outlet sections, trough sections with screw flight and the drive assembly. Equipment and accessories are manufactured both for straightforward conveyors and for complete systems for large turn-key ...
-
Manufactured by METER Group, Inc.based in USA
To spray or not to spray? Now you know. Diseases and infections can destroy an entire crop, but at the same time, applying fungicides is costly and time-consuming. If you’re deciding when to spray by monitoring leaf wetness with a resistance grid sensor, you’ll have trouble accurately determining wetness duration without a lot of extra work. You need a sensor with automatic ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS Hammer-Head Soil Probe Kit features a 16"L hammer-head cross handle which can be hammered on with the (included) impact absorbing dead blow hammer. No need to lug around a heavy slide hammer anymore! A standard 10” cross handle with rubber grips also comes in the kit for regular soil conditions. Probe measures 7/8"-dia. x 33"L and is constructed of nickel plated chrome molybdenum. ...
-
Manufactured by A/S Cimbria - part of AGCO Corporationbased in DENMARK
Safety and clean environment in one product. Cimbria Moduflex loading chutes are designed for dust-free outloading of dry bulk material. The loading chutes can be supplied for tanker trucks, flatbed trucks, open and closed rail wagons and containers. The chutes can be manufactured in a more sturdy construction for shiploading, stockpiling and warehousing, depending on customer requirements for ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS EZ Eject Soil Probe is not recommended for sticky soil conditions. This unique soil probe ejects soil samples quickly & efficiently. Each probe has its own internal piston with side handle. This built-in hand plunger allows you to eject the entire soil sample from the slot and even through the tip of the probe. Twist the side handle clockwise to lock the piston in place. For a full ...
-
Manufactured by METER Group, Inc.based in USA
The potential for error when measuring water potential. Measuring soil water potential is never easy. Traditional methods such as pressure plates or filter paper have always been problematic. Not only are they extremely time consuming, but both methods have issues with accuracy. That’s why we developed the ...
-
Manufactured by Dynamax Incbased in USA
After more than 25 years of experience and a worldwide experience with sap flow sensor manufacturing and design, the Dynamax team brings you the latest innovations and sap flow sensor construction advancements. With continuous customer feedback over the years, and through several years of research, we solved many of the commercial and research needs for a more plant friendly and user-friendly sap ...
-
Manufactured by METER Group, Inc.based in USA
You need sensor longevity: Soil can be highly variable in space, requiring numerous measurements and frustrating amounts of your research dollars. Not to mention the extra cost and hassle of replacement sensors if you need long-term data. Make long-term, large sensor networks simpler, longer-lasting, and more affordable with the ultra-dependable TEROS 12 soil moisture and temperature ...
-
PremiumManufactured by AMS, Inc.based in USA
Open End Soil Probes collect shallow samples that are 15” in length. They are primarily used for agricultural applications. The Soil Probe body is made from nickel-plated chromoly. The 15" slot in the Soil Probe is cut to the end of the probe body to facilitate emptying of the sample. It includes a 10" Cross ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you