Skid Steer Equipment For Agriculture Management Available In Africa
-
Manufactured by Diggabased in AUSTRALIA
Digga Bale Spears for telehandlers are designed for picking up square and round bales with minimum ...
-
Manufactured by Continental Biomass Industries, Inc. (CBI)based in USA
The CBI Log and Stump Screw is designed to split oversized butt logs, pole wood, and stumps with ease and efficiency. Ideal for all excavators, log loaders, front-end loader/backhoes, farm tractors and skid steer units. Size and type of log screw you need depends on the machine"s hydraulic flow capacity, pressure and tonnage. Splits wood up to 7 feet in diameter and up to 20 feet in ...
-
Manufactured by Faster S.p.A.based in ITALY
The first cast iron block ever designed allowing a quick connection and disconnection of attachments for skid steer loaders and other construction equipment machines. Cartridges share all the benefits of the FFH series technology. The decompression feature allows to connect the circuit with residual pressure on both ends. Higher flow capability is guaranteed when using 3/4" cartridges instead of ...
-
Manufactured by Ag-Bagbased in USA
The T7060 Pull-Type Ag-Bagger features increased forage capacity with either a 6, 8, or 9-foot tunnel. The T7060 complements the T7170 in providing a dense, uniform bag with greater forage capacity. Operators will enjoy easier transportation and greater serviceability with this new ...
-
Manufactured by Coneqtec Universalbased in USA
The AB-2100HD is designed to clear roads, sidewalks and parking lots of snow and the debris that lies beneath. Heavy-duty upgrades have been made all around. With its universal quick attach, it can be mounted on any brand of skid ...
-
Manufactured by Murray Machinery Ltdbased in UNITED KINGDOM
The Murray Pipe Stabilising Clamp is designed to be fitted to any large fork lift or telescopic handler to stabilise long loads or long pipes when being transported over uneven ground or when loading and unloading lorries. The clamping mechanisms are activated by hydraulic cylinders and have large rubber sections fitted to prevent slippage and damage to the loads. ...
-
Manufactured by Barone Incbased in USA
Model 16M2FS is suitable for any skid steer, loader/backhoe, or small excavator with a maximum machine weight of 25,000 Ibs. It replaces the hoe bucket and utilizes existing bucket pins. Sheepfeet are more aggressive for breaking up lumps and compacting soils that contain cohesive material. ...
-
Manufactured by Murray Machinery Ltdbased in UNITED KINGDOM
The Murray Double Bale Spike is constructed from heavy duty box section and has four heavy duty tines bolted into sockets along the bottom frame of the spike. The Murray Double Bale Spike also comes in a "fold up" version, this is to allow the operator to fold the protruding tines up safely when travelling along the public highway when fitted to the front or rear of any tractor. ...
-
Manufactured by Mustang - Manitou Americas, Inc.based in USA
Performance: The demand for a Mustang by Manitou 1,500 lbs. (680 kg) capacity skid steer loader has been fulfilled with the introduction of the 1500R NXT2. Net Power (kW) : 44.5 hp (33.2) Maximum Torque (Nm) : 108 ft.-lbs. (146.2) Rated Operating Capacity (kg) : 1,500 lbs. ...
-
Manufactured by Cross-Tech Manufacturingbased in USA
The 72 M-AX handles your most demanding cutting jobs year after year. The direct drive motor and massive bearing housing make this heavy-duty machine the best to tackle heavy brush and trees up to 8″ in diameter. This workhorse is meant for industrial or commercial applications. The open front, spring loaded push bar and “V-Notch” design allows for close contact to cut trees and ...
-
Manufactured by ProLine, A Division of Heritage Oak Farmbased in USA
ProLine™ FORQUES™ is the ultimate tree forks, offering a better product at a better price over comparable equipment. Like other tree forks, the ProLine™ FORQUES™ is designed to move multiple root balls allowing you to pick up two to three trees at one time. This can double or triple productivity when moving multiple trees compared to moving one tree at a time with a ...
-
Manufactured by Ventura Maquinas Forestales S,Lbased in SPAIN
T.F.V.L.H.M. mulcher with hammers or flails. Equipped with an hydraulic pump and belt drive. Suitable for skid-steer. For branches up to 5-6 cm diameter. For branches from 5-6 cm diameter Attachment for ...
-
Manufactured by Morrish Engineering Limitedbased in UNITED KINGDOM
Our range of Skimmer Loaders are purpose built for the skimming of material deposits from the surface of sand filter beds, and the loading of this material into a following Dumper Truck. 250 250 or self contained Hopper (150 only). All machines are compact and lightweight for easy transportation. The skid steer hydrostatic transmission enables exceptional ...
-
Manufactured by Mustang - Manitou Americas, Inc.based in USA
Load Capacity of 850 lbs. Lift height of 96”. 24-hp Yanmar diesel engine. Radial-lift arm design. Ground speeds up to 5.5 mph. Operator-friendly Level II-certified ROPS/FOPS. Auxiliary hydraulics of 9.1 gpm. Machine width as narrow as three feet with 5.70 x 12 Chevron tire set. Safety Interlock System requires operator to be seated with restraint bar down prior to operation. A tiltable ...
-
Manufactured by VES-Artex. A Turntide Companybased in USA
Protecting your calves is easy with the pen-to-pen isolation offered by Artex Calf Zone Pens. More suited for temperate and colder climates, our pens protect calves from drafts and coming into contact with animals in adjoining pens. Whether you are mounting to a structural wall or in stand-alone rows, Artex Calf Pens are fully customizable with a variety of wall length’s, back wall options, ...
-
Manufactured by John Deerebased in USA
Navigating crowded jobsites often isn't easy. While other machines are frequently forced into three-point turns (or worse), the oscillating stereo steering of the nimble 324K Loader allows a tight turning radius (3.78 m [149 in.]) for unsurpassed maneuverability. Delivers higher tipping load capacities, too. What's more, the hydrostatic drivetrain's infinitely variable range lets you precisely ...
-
Manufactured by Pengo Attachments, incbased in USA
The Severe Rock Ripper is specifically designed to handle the most difficult rock applications. Featuring our Rock Ripper Pilot, ½” thick hard-faced flighting and carbide conical teeth, the SRR is the most robust tool in the construction ...
-
Manufactured by Verga Attachments Pvt LTDbased in INDIA
We custom machine all the material grades as per the custom requirement of the customers and OEMs. We support all the OEM programs. We manufacture machined components for all ranges of Excavators, Back Hoe loaders, Skid steers and other forestry equipment. We machine components from Steel Alloys like EN8D, 20MnCr5, 20MnV5, 25CrMO4, Low Carbon Steels, High Carbon Steels, Chrome Steels, Chrome ...
-
Manufactured by Barone Incbased in USA
Model 16M2FP is suitable for any skid steer, loader/backhoe, or small excavator with a maximum machine weight of 25,000 Ibs. It replaces the hoe bucket and utilizes existing bucket pins. Padfeet are more effective in sand, gravel, and soils that contain little or no cohesive ...
-
Manufactured by Auger Torque USA LLC.based in USA
The S4 range of augers are perfect for Mini Loaders, Skid Steer Loaders up to 80hp, Excavators up to 1T-5T and Truck Cranes up to 9T/metre. Built from high grade steel, these augers incorporate many features that will allow you to work more efficiently making your job easier. Shallow pitch flights ensure they cut with maximum efficiency and importantly keep the spoil on the flights when removed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you