Slurry Handling Equipment For Agriculture Management Available In Australasia
-
PremiumManufactured by Zeltex LLCbased in USA
EvoNIR 4.0 Analyzer with ISOBUS protocol can be connected to any virtual terminal with built-in ISOBUS task controller and can be installed on forage harvesters, combines, balers, forage wagons, slurry tankers, compactors, feed mixers and portable in a carrying ...
-
Manufactured by Wright Rain & MacPennybased in UNITED KINGDOM
The Wright Rain Manurain Sprinkler, designed & manufactured in England, and used throughout the world is an efficient, low-maintenance full circle rotating sprinkler specifically designed for the handling of slurry. It will operate over a wide range of pressures (1-5bar), and will distribute slurry evenly over a wide ...
-
Manufactured by Shuliy Machinery Co. Ltd.based in CHINA
1, multi-functional spring roll skin products advantages: The skin is thin and flexible, easy to wrap, not easy to rupture, and has a good taste. It is easy to tear open, the sheet is not broken, it is easy to operate, and the scrap rate is low. It has strong moisturizing properties, is not easy to crack, and the fried fillings are not leaked. There is no residual black residue when fried. After ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to ...
-
Manufactured by Jiangsu Teeyer Intelligent Equipment Corp., Ltd.based in CHINA
There is a transition slurry pool next to the slurry storage tank, with two functions: one is to pump slurry to batching area, the other is to make connection with each single tank. ...
-
Manufactured by Abbey Machinery Ltd.based in IRELAND
Abbey Machinery manufacture the most complete range of side spreaders on the market today with sizes ranging from 4 cubic yards to 15.5 cubic yards. The Abbey side spreader is one of the leading side spreaders available with the ability to handle a wide range of manure from solid to slurry. The Abbey side spreader range is built with increased chassis support to lend maximum support, strength ...
-
Manufactured by Fimaksbased in TURKEY
Fimaks FST 8000 slurry tankers are designed to suck slurry from the lagoons and homogeneously spread on fields. Special low height design, floatation tires, and strong chassis are some of the features of Fimaks slurry tankers. These features allow users to operate on all kinds of terrain, store the machine inside low-height buildings and maintain the machine easily. Fimaks slurry tankers have ...
-
Manufactured by Qinhuangdao Yutian Investment Casting Equipment Co., Ltd.based in CHINA
This machine is special designed for shell dipping in die investment casting line, in which the work pieces will be with the letters, groove, inner cavity or blind ...
-
Manufactured by Veenhuis Machines B.V.based in NETHERLANDS
The newly developed Ecoline slurry tanks offer the perfect introduction to slurry application. This model is standard prepared for the installation of a dripple bar linkage or trailing shoe distributor. The Ecoline stands out with the stable and high-quality construction. A good weight distribution ensures, even when hitching a wide dripple bar linkage or trailing shoe distributor in the rear, ...
-
Manufactured by BHR Group Limitedbased in UNITED KINGDOM
Climate change and the need for environmentally responsible, cost effective and efficient methods of ore and tailings transport place great demands on the mining industry. A growing number of operations are meeting the challenge by using more hydrotransport handling of solid/liquid mixtures in both short in-plant and long-distance pipelines. This most basic of techniques combines a number of ...
-
Manufactured by JOSKINbased in BELGIUM
The MODULO2 slurry tanker is available as single axle with a capacity from 2,500 to 11,000 l and as double-axle from 8,400 to 18,000 l. The tank is laid down on and welded on an integral cradle (on its width and length) on which the traction strains are focused. The double-axle MODULO2 slurry tanker is fitted with a boggie running gear. ...
-
Manufactured by BSA GmbHbased in GERMANY
The Speedy trailing shoe distributor is a new, very light and inexpensive series from Bomech. This series is lighter than all other 12 m and 15 m trailing shoe distributors available on the market. The Speedy can be installed quickly and easily on new and used slurry tanks with trailing shoe preparation. The newly developed control for this distributor only requires a ...
-
Manufactured by Major Equipmentbased in IRELAND
This is the specialist tandem slurry tanker range from MAJOR. All MAJOR tankers are constructed from 6mm steel for maximum strength. These tankers sit upon high specification commercial axles. They are supplied with steering axles as standard for minimal ground compaction and easy ...
-
Manufactured by Redrock Machinery Ltdbased in NORTHERN IRELAND
The Redrock slurry tanker range is built to the highest quality. Rolled from 6mm steel, all the tanks are welded both internally and externally and include 4” x 2” channel rings welded inside the tank for extra strength and a longer service life. The Redrock body, wheel arches, supports and draw-bar are designed and manufactured to the most exacting standards to maintain rigidity, ...
-
Manufactured by SlurryKat Ltdbased in UNITED KINGDOM
Long & Reliable Operation: If you are a contractor offering long distance slurry/ manure handling, then it is likely that you will frequently operate in environments that require more than 1000 metres of hose. SlurryKat Trailed Reelers keep slurry/manure flowing in this type of situation, and take the hard work out of hose laying and retrieval. Highly mobile and robust, all of our rigorously ...
-
Manufactured by INOX Pty. Ltdbased in AUSTRALIA
The Inox Instantiser has been successfully proven to be Australia's food industry answer to fast, homogeneous powder/liquid mixing and an effective solution to problems that occur with mixing systems where breaking up of difficult to mix solutions and agglomerates is present with traditional mixing ...
-
Manufactured by Pichon - Samson Agro Sasubased in FRANCE
Our TCI range includes more than 70 slurry tanker configurations, from the smallest single axle model to the tridem tank. We have studied and designed each model according to your terrain constraints, so you are bound to find the tanker that meets your needs. The TCI range is compatible with our spreading tools (drip hoses, incorporators, injectors, etc.) and our filling solutions (BP2, ...
-
Manufactured by Wal-Ag Pty Ltdbased in AUSTRALIA
Lightweight & affordable, with all the features of the larger ...
-
Distributed by Spraygrass Landscapes Australia Pty Ltd.based in AUSTRALIA
In this process, a slurry of water, seed and fertiliser and sometimes a dye are homogeneously mixed in a purpose-built truck or trailer mounted tank. The slurry must be constantly agitated while the mixture is sprayed on the area to be treated. This treatment has no erosion control capabilities and is only suitable for spreading exotic or native seed prior to a subsequent Hydromulch or Straw ...
-
Manufactured by BSA GmbHbased in GERMANY
The Möscha exact swivel distributor offers a coarse-dropped distribution of slurry, which results in a low loss of nitrogen. The pendulum movement which is initiated by the slurry guide plates, working width of up to 18m, depending on the outlet pressure, can be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you