Slurry Handling Equipment For Agriculture Management Available In Belarus
-
PremiumManufactured by Zeltex LLCbased in USA
EvoNIR 4.0 Analyzer with ISOBUS protocol can be connected to any virtual terminal with built-in ISOBUS task controller and can be installed on forage harvesters, combines, balers, forage wagons, slurry tankers, compactors, feed mixers and portable in a carrying ...
-
Manufactured by Shuliy Machinery Co. Ltd.based in CHINA
1, multi-functional spring roll skin products advantages: The skin is thin and flexible, easy to wrap, not easy to rupture, and has a good taste. It is easy to tear open, the sheet is not broken, it is easy to operate, and the scrap rate is low. It has strong moisturizing properties, is not easy to crack, and the fried fillings are not leaked. There is no residual black residue when fried. After ...
-
Manufactured by Guttler GmbHbased in GERMANY
The SuperMaxx with 5 m working width requires the same amount of traction force as a 3-metre cultivator. Depending on the type of soil, 100 to 140 bhp is sufficient to run the machine. What is more, the SuperMaxx saves 40% of the turning time on headland. Fuel consumption cut by half: Thanks to the flat and finely-crumbled processing of the soil, only 5 l/ha diesel is required and therefore less ...
-
Manufactured by Wright Rain & MacPennybased in UNITED KINGDOM
The Wright Rain Manurain Sprinkler, designed & manufactured in England, and used throughout the world is an efficient, low-maintenance full circle rotating sprinkler specifically designed for the handling of slurry. It will operate over a wide range of pressures (1-5bar), and will distribute slurry evenly over a wide ...
-
Manufactured by MEPROZET Kościan S.A.based in POLAND
CHASSIS: Slurry tanker PN-50 is designed as self-supporting tank, mounted on a single-axle chassis. TANK: A steel, hot galvanised tank with central frame has internal strengthening rings. Closed rear head with a Ø 600 hatch. Sight-glasses are mounted on the front head. An overflow safety device and Ø 200 mm hatch are placed in the upper part of the tank and connection pipes for ...
-
Manufactured by Oehler Maschinen Fahrzeugbau GmbHbased in GERMANY
These advantages might convince you: Latest pump technology. Quick and complete tank filling. Fully galvanized tanks. Optimum shunting ...
-
Manufactured by Abbey Machinery Ltd.based in IRELAND
Abbey Machinery manufacture the most complete range of side spreaders on the market today with sizes ranging from 4 cubic yards to 15.5 cubic yards. The Abbey side spreader is one of the leading side spreaders available with the ability to handle a wide range of manure from solid to slurry. The Abbey side spreader range is built with increased chassis support to lend maximum support, strength ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to ...
-
Manufactured by Maschinenfabrik Meyer-Lohne GmbHbased in GERMANY
Up to 30.000 litres capacity. operation on large-range agricultural areas. for use in a transport chain with truck or tractor supply vehicles. serially air-suspended. serially all axles with electronically forced steering. serially with a displacement pump of up to 11.000 litres capacity. special features: hose-towed distributors up to 36m, shoe-towed distributors up to 24m, injectors up to 9m, ...
-
Manufactured by Kotte Landtechnik GmbH & Co. KGbased in GERMANY
Compressor Jurop with an air capacity of 11,000 litres. Filling accelerator NW 200 under the tank with the possibility to suck right and left via tee (optional). Original BPW Boogie steering axle unit with square axle 150x150 and brake drum 410x180, up to 60 km/h. Wide angle cardan shaft original Walterscheid with sleeve base lubrication and shear bolt. Solid supporting winch original Jost ...
-
Manufactured by BSA GmbHbased in GERMANY
The Speedy trailing shoe distributor is a new, very light and inexpensive series from Bomech. This series is lighter than all other 12 m and 15 m trailing shoe distributors available on the market. The Speedy can be installed quickly and easily on new and used slurry tanks with trailing shoe preparation. The newly developed control for this distributor only requires a ...
-
Manufactured by Major Equipmentbased in IRELAND
This is the specialist tandem slurry tanker range from MAJOR. All MAJOR tankers are constructed from 6mm steel for maximum strength. These tankers sit upon high specification commercial axles. They are supplied with steering axles as standard for minimal ground compaction and easy ...
-
Manufactured by MEPROZET Kościan S.A.based in POLAND
All strenuous operations connected with standard hose maintenance and transport can be quickly eliminated by equipping the slurry tanker with plunged suction hose. It is an additional hydraulic arm mounted on the side in the back part of the tank, to which 4” or 5” suction hose is hanged. The hose is moved by lowering or lifting the arm. Hydraulically plunged suction hose can be ...
-
Manufactured by Jiangsu Teeyer Intelligent Equipment Corp., Ltd.based in CHINA
There is a transition slurry pool next to the slurry storage tank, with two functions: one is to pump slurry to batching area, the other is to make connection with each single tank. ...
-
Manufactured by MEPROZET Kościan S.A.based in POLAND
CHASSIS: Slurry tanker PN-20/2 is designed as self-supporting tank, mounted on a single-axle chassis. TANK: A steel, hot galvanized tank has internal strengthening rings. Closed rear head with a Ø 420 mm hatch. Sight-glasses are mounted on the front head. COMPRESSOR: As a standard JUROP PN 45M compressor is mounted on the ...
-
Manufactured by Doda USAbased in USA
Doda manufactures a variety of propeller mixers suited for the most challenging applications. The unique self-cleaning propeller is designed for applications where the treated mass must be kept in a homogeneous state without dispersing the characteristic gasses used for ...
-
Manufactured by Slootsmid Mesttechniek B.V.based in NETHERLANDS
Slootsmid arable slurry injectors have a robust construction in combination with a relatively low own weight. The frames are fully galvanised, which offers good protection against the heavy circumstances under which the slurry injectors are often used. Two or four support wheels that can be adjusted in heigt ensure the correct working depth. The farmland slurry injector SB Eco is provided with ...
-
Manufactured by Jaykrishna Magnetics Pvt Ltdbased in INDIA
Jaykrishna magnetic manufacturer electromagnetic ferro filter which is used for the filtration of fine iron particles from a ceramic slurry/chemical or liquid slurry. This system is 100% automated and no need of human ...
-
Manufactured by Redrock Machinery Ltdbased in NORTHERN IRELAND
The Redrock slurry tanker range is built to the highest quality. Rolled from 6mm steel, all the tanks are welded both internally and externally and include 4” x 2” channel rings welded inside the tank for extra strength and a longer service life. The Redrock body, wheel arches, supports and draw-bar are designed and manufactured to the most exacting standards to maintain rigidity, ...
-
Manufactured by Bossini S.r.l.based in ITALY
Tank capacity 15.000 ÷ 17.000 liters. Air brakes, hydraulic or both air/hydraulic. EC European Certification. Patented hydraulic suspension with new torpress 3 sectors with rings and multilayer membrane for heavy use. New connecting pipes increased Ø 65 mm. Nr.3 increased axles with 10 industrial holes and increased brakes. First and third steering axles with hydraulic block. Brakes ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you