Slurry Handling Equipment For Agriculture Management Available In Malawi
-
PremiumManufactured by Zeltex LLCbased in USA
EvoNIR 4.0 Analyzer with ISOBUS protocol can be connected to any virtual terminal with built-in ISOBUS task controller and can be installed on forage harvesters, combines, balers, forage wagons, slurry tankers, compactors, feed mixers and portable in a carrying ...
-
Manufactured by Shuliy Machinery Co. Ltd.based in CHINA
1, multi-functional spring roll skin products advantages: The skin is thin and flexible, easy to wrap, not easy to rupture, and has a good taste. It is easy to tear open, the sheet is not broken, it is easy to operate, and the scrap rate is low. It has strong moisturizing properties, is not easy to crack, and the fried fillings are not leaked. There is no residual black residue when fried. After ...
-
Manufactured by Wright Rain & MacPennybased in UNITED KINGDOM
The Wright Rain Manurain Sprinkler, designed & manufactured in England, and used throughout the world is an efficient, low-maintenance full circle rotating sprinkler specifically designed for the handling of slurry. It will operate over a wide range of pressures (1-5bar), and will distribute slurry evenly over a wide ...
-
Manufactured by Oehler Maschinen Fahrzeugbau GmbHbased in GERMANY
These advantages might convince you: Latest pump technology. Quick and complete tank filling. Fully galvanized tanks. Optimum shunting ...
-
Manufactured by Abbey Machinery Ltd.based in IRELAND
Abbey Machinery manufacture the most complete range of side spreaders on the market today with sizes ranging from 4 cubic yards to 15.5 cubic yards. The Abbey side spreader is one of the leading side spreaders available with the ability to handle a wide range of manure from solid to slurry. The Abbey side spreader range is built with increased chassis support to lend maximum support, strength ...
-
Manufactured by EURO-P Kleindienst GmbHbased in GERMANY
ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to ...
-
Manufactured by BSA GmbHbased in GERMANY
The Speedy trailing shoe distributor is a new, very light and inexpensive series from Bomech. This series is lighter than all other 12 m and 15 m trailing shoe distributors available on the market. The Speedy can be installed quickly and easily on new and used slurry tanks with trailing shoe preparation. The newly developed control for this distributor only requires a ...
-
Manufactured by Major Equipmentbased in IRELAND
This is the specialist tandem slurry tanker range from MAJOR. All MAJOR tankers are constructed from 6mm steel for maximum strength. These tankers sit upon high specification commercial axles. They are supplied with steering axles as standard for minimal ground compaction and easy ...
-
Manufactured by Jiangsu Teeyer Intelligent Equipment Corp., Ltd.based in CHINA
There is a transition slurry pool next to the slurry storage tank, with two functions: one is to pump slurry to batching area, the other is to make connection with each single tank. ...
-
Manufactured by Doda USAbased in USA
Doda manufactures a variety of propeller mixers suited for the most challenging applications. The unique self-cleaning propeller is designed for applications where the treated mass must be kept in a homogeneous state without dispersing the characteristic gasses used for ...
-
Manufactured by Slootsmid Mesttechniek B.V.based in NETHERLANDS
Slootsmid arable slurry injectors have a robust construction in combination with a relatively low own weight. The frames are fully galvanised, which offers good protection against the heavy circumstances under which the slurry injectors are often used. Two or four support wheels that can be adjusted in heigt ensure the correct working depth. The farmland slurry injector SB Eco is provided with ...
-
Manufactured by Jaykrishna Magnetics Pvt Ltdbased in INDIA
Jaykrishna magnetic manufacturer electromagnetic ferro filter which is used for the filtration of fine iron particles from a ceramic slurry/chemical or liquid slurry. This system is 100% automated and no need of human ...
-
Manufactured by Redrock Machinery Ltdbased in NORTHERN IRELAND
The Redrock slurry tanker range is built to the highest quality. Rolled from 6mm steel, all the tanks are welded both internally and externally and include 4” x 2” channel rings welded inside the tank for extra strength and a longer service life. The Redrock body, wheel arches, supports and draw-bar are designed and manufactured to the most exacting standards to maintain rigidity, ...
-
Manufactured by Bossini S.r.l.based in ITALY
Tank capacity 15.000 ÷ 17.000 liters. Air brakes, hydraulic or both air/hydraulic. EC European Certification. Patented hydraulic suspension with new torpress 3 sectors with rings and multilayer membrane for heavy use. New connecting pipes increased Ø 65 mm. Nr.3 increased axles with 10 industrial holes and increased brakes. First and third steering axles with hydraulic block. Brakes ...
-
Manufactured by Cross Agricultural Engineering Ltd.based in IRELAND
Cross Agricultural Engineering Dribble Bars are top of the range when it comes to slurry application. With a lot of extra features as standard that are not even an option with other manufacturers, the Cross dribble bar stands out ahead of the rest when it comes to technology. ...
-
Manufactured by Milston, By Rannan Teollisuuskone Oybased in FINLAND
MILSTON FARMER is a slurry separator, which is equipped with one efficient separation screen and it is suitable for fixed installation as well as for mobile ...
-
Manufactured by BSA GmbHbased in GERMANY
The BSA double nozzle spreader which is produced in-house, is based on the swivel spreader principle. Due to a boom which can be folded away a spreading width of up to 27m can be reached. For a safe transport on the street an arrester for the arms and brass gate valve is mounted before the ...
-
Manufactured by Slootsmid Mesttechniek B.V.based in NETHERLANDS
Slootsmid arable slurry injectors have a robust contstruction in combination with a relatively low own weight. The frames are fully galvanised, which offers good protection against the heavy circumstances under which the slurry injectors are often used. Two or four support wheels that can be adjusted in height ensure the correct working depth. The SB Profi is provided with a 3- or 4-point ...
-
Manufactured by JOSKINbased in BELGIUM
The MODULO2 slurry tanker is available as single axle with a capacity from 2,500 to 11,000 l and as double-axle from 8,400 to 18,000 l. The tank is laid down on and welded on an integral cradle (on its width and length) on which the traction strains are focused. The double-axle MODULO2 slurry tanker is fitted with a boggie running gear. ...
-
Manufactured by Deppe Commercial Vehiclesbased in GERMANY
Airtight semi-trailer tank of 29.000 Liter volume. Welded Steel Tank, 5 mm thick walls, self-supporting, 2000 mm diameter, high pressure performance. The individual container elements are customized, fitted together and then welded inside and out. Doing this makes the tank extremely stable. Additionally, there are 3 baffles and 7 stiffening rings from U-iron welded into the container. Boerger or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you