Slurry Handling Equipment For Agriculture Management
-
PremiumManufactured by Zeltex LLCbased in USA
EvoNIR 4.0 Analyzer with ISOBUS protocol can be connected to any virtual terminal with built-in ISOBUS task controller and can be installed on forage harvesters, combines, balers, forage wagons, slurry tankers, compactors, feed mixers and portable in a carrying ...
-
Manufactured by Wright Rain & MacPennybased in UNITED KINGDOM
The Wright Rain Manurain Sprinkler, designed & manufactured in England, and used throughout the world is an efficient, low-maintenance full circle rotating sprinkler specifically designed for the handling of slurry. It will operate over a wide range of pressures (1-5bar), and will distribute slurry evenly over a wide ...
-
Manufactured by TurfMaker Corporationbased in USA
The TurfMaker 1000 hydroseeder can cover large areas with a single tank load. When making thin applications on budget-sensitive jobs, paper mulch can be used to cover as much as an acre with one tank load. When going for Sod Quality Results™, a quality minded contractor can use 100% wood fiber mulch applied at heavy rates and cover 6,000-8,000 sq ...
-
Manufactured by Kotte Landtechnik GmbH & Co. KGbased in GERMANY
Compressor Jurop with an air capacity of 11,000 litres. Filling accelerator NW 200 under the tank with the possibility to suck right and left via tee (optional). Original BPW Boogie steering axle unit with square axle 150x150 and brake drum 410x180, up to 60 km/h. Wide angle cardan shaft original Walterscheid with sleeve base lubrication and shear bolt. Solid supporting winch original Jost ...
-
Manufactured by Shuliy Machinery Co. Ltd.based in CHINA
1, multi-functional spring roll skin products advantages: The skin is thin and flexible, easy to wrap, not easy to rupture, and has a good taste. It is easy to tear open, the sheet is not broken, it is easy to operate, and the scrap rate is low. It has strong moisturizing properties, is not easy to crack, and the fried fillings are not leaked. There is no residual black residue when fried. After ...
-
Manufactured by Maschinenfabrik Meyer-Lohne GmbHbased in GERMANY
Up to 30.000 litres capacity. operation on large-range agricultural areas. for use in a transport chain with truck or tractor supply vehicles. serially air-suspended. serially all axles with electronically forced steering. serially with a displacement pump of up to 11.000 litres capacity. special features: hose-towed distributors up to 36m, shoe-towed distributors up to 24m, injectors up to 9m, ...
-
Manufactured by Pick Heaters, Inc.based in USA
The Pick Sanitary Direct Steam Injection Heater/Jet Cooker is the preferred choice for in-line product cooking, CIP heating or nitrogen gas ...
-
Manufactured by Milston, By Rannan Teollisuuskone Oybased in FINLAND
MILSTON E1 is a slurry separator, which is equipped with one efficient separation screen and it is suitable for fixed installation as well as for mobile ...
-
Manufactured by Fliegl Agrartechnik GmbHbased in GERMANY
The Jumbo series of vacuum drum wagons has been specially designed for slopes. Barrels with a capacity of 5000 l or more have an offset axle (up to 26.5") to ensure a particularly low center of gravity. Practicality and efficiency were particularly important to us when developing the new barrel ...
-
Manufactured by Jaykrishna Magnetics Pvt Ltdbased in INDIA
Jaykrishna magnetic manufacturer electromagnetic ferro filter which is used for the filtration of fine iron particles from a ceramic slurry/chemical or liquid slurry. This system is 100% automated and no need of human ...
-
Manufactured by Agriest S.A.based in FRANCE
Slurry tanker parts: Vacuum pumps, Vacuum pump vanes, Gate valves, Valves, Sleeves, Automatic coupling kits, Plugs, elbows and funnels, Spreader nozzles and plates, Rubber shoes, Spreader nozzles, O-rings Couplings, Heavy duty hose clamps, Pipes, Constant level ...
-
Manufactured by Slootsmid Mesttechniek B.V.based in NETHERLANDS
Slootsmid arable slurry injectors have a robust construction in combination with a relatively low own weight. The frames are fully galvanised, which offers good protection against the heavy circumstances under which the slurry injectors are often used. Two or four support wheels that can be adjusted in heigt ensure the correct working depth. The farmland slurry injector SB Eco is provided with ...
-
Manufactured by Milston, By Rannan Teollisuuskone Oybased in FINLAND
MILSTON FARMER is a slurry separator, which is equipped with one efficient separation screen and it is suitable for fixed installation as well as for mobile ...
-
Manufactured by BSA GmbHbased in GERMANY
The BSA double nozzle spreader which is produced in-house, is based on the swivel spreader principle. Due to a boom which can be folded away a spreading width of up to 27m can be reached. For a safe transport on the street an arrester for the arms and brass gate valve is mounted before the ...
-
Manufactured by MEPROZET Kościan S.A.based in POLAND
CHASSIS: Slurry tanker PN-20/2 is designed as self-supporting tank, mounted on a single-axle chassis. TANK: A steel, hot galvanized tank has internal strengthening rings. Closed rear head with a Ø 420 mm hatch. Sight-glasses are mounted on the front head. COMPRESSOR: As a standard JUROP PN 45M compressor is mounted on the ...
-
Manufactured by Doda USAbased in USA
Doda manufactures a variety of propeller mixers suited for the most challenging applications. The unique self-cleaning propeller is designed for applications where the treated mass must be kept in a homogeneous state without dispersing the characteristic gasses used for ...
-
Manufactured by Bossini S.r.l.based in ITALY
Tank capacity 15.000 ÷ 17.000 liters. Air brakes, hydraulic or both air/hydraulic. EC European Certification. Patented hydraulic suspension with new torpress 3 sectors with rings and multilayer membrane for heavy use. New connecting pipes increased Ø 65 mm. Nr.3 increased axles with 10 industrial holes and increased brakes. First and third steering axles with hydraulic block. Brakes ...
-
Manufactured by Cross Agricultural Engineering Ltd.based in IRELAND
Cross Agricultural Engineering Dribble Bars are top of the range when it comes to slurry application. With a lot of extra features as standard that are not even an option with other manufacturers, the Cross dribble bar stands out ahead of the rest when it comes to technology. ...
-
Manufactured by Guttler GmbHbased in GERMANY
The SuperMaxx with 5 m working width requires the same amount of traction force as a 3-metre cultivator. Depending on the type of soil, 100 to 140 bhp is sufficient to run the machine. What is more, the SuperMaxx saves 40% of the turning time on headland. Fuel consumption cut by half: Thanks to the flat and finely-crumbled processing of the soil, only 5 l/ha diesel is required and therefore less ...
-
Manufactured by MEPROZET Kościan S.A.based in POLAND
CHASSIS: Slurry tanker PN-50 is designed as self-supporting tank, mounted on a single-axle chassis. TANK: A steel, hot galvanised tank with central frame has internal strengthening rings. Closed rear head with a Ø 600 hatch. Sight-glasses are mounted on the front head. An overflow safety device and Ø 200 mm hatch are placed in the upper part of the tank and connection pipes for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you