Slurry Storage Equipment For Agriculture Management Available In Andorra
-
Manufactured by Hydra International Ltdbased in UNITED KINGDOM
Bacteria accelerates natural break down of farm organic waste. Clears blockages, prevents blinding screens, liquefies crusts in slurry pits. Eases emptying of pits and tanks, reduces bad odours and flies. Shelf life 2 years, 1 Kg treats up to ...
-
Manufactured by RECK-Technik GmbH & Co. KGbased in GERMANY
With effective propeller shapes, a robust overall construction and powerful motor drive even strongest surface crusts can be mixed. This enables pumping off without problems, regular spreading and also reduces costs for mineral fertilizer. Maximum farmland or grassland yields due to a best possible ...
-
Manufactured by Agriprom BVbased in NETHERLANDS
The Agriprom slurry separator Pro-2 is constructed with highest standards out of stainless steel for all main parts with abnormal contact to the slurry. The slurry Separator Pro-2 is specified for the use with slurry and bio gas substrate in its normal consistency. It is excellent for the separation of solids and liquids within an operative range with a dry mass content above the drum screen ...
-
Manufactured by Storth Limitedbased in UNITED KINGDOM
The Mega Mix Range has been designed to cater for the insreasing demand for mixing larger lagoons which have arisen due to legislation changes and the increased demand importance placed on slurry being used on the land at the optimum time. The Mega Mix uses an auger to draw in the slurry and re-circulate it through the 5” jetter nozzle which provides a large volume of slurry allowing great ...
-
Manufactured by Rekitec Oybased in FINLAND
The screw separator separates the dry substance and liquid. This way the harm a will turn into a profitable article. We supply all separation systems customised for the ...
-
Manufactured by Jiangsu Teeyer Intelligent Equipment Corp., Ltd.based in CHINA
There is a transition slurry pool next to the slurry storage tank, with two functions: one is to pump slurry to batching area, the other is to make connection with each single tank. ...
-
Manufactured by Genap B.V.based in NETHERLANDS
The Airhat is a cover manufactured from high quality, watertight, reinforced PVC foil. This foil has a high resistance to heat and ...
-
Manufactured by Monostore bvbased in NETHERLANDS
Monostore provides the most constructed slurry tank of Europe. A slurry tank, that has proven its solidity and reliability without any doubt. Combined with the unique and efficient construction system of Monostore, this solid solution is a very competitive solution as well. The measurements run up from 15 to 15.000 m3.Please contact our UK salesman because with this type of tank you invest in ...
-
Manufactured by Fimaksbased in TURKEY
Fimaks FST 8000 slurry tankers are designed to suck slurry from the lagoons and homogeneously spread on fields. Special low height design, floatation tires, and strong chassis are some of the features of Fimaks slurry tankers. These features allow users to operate on all kinds of terrain, store the machine inside low-height buildings and maintain the machine easily. Fimaks slurry tankers have ...
-
Manufactured by Qinhuangdao Yutian Investment Casting Equipment Co., Ltd.based in CHINA
This machine is special designed for shell dipping in die investment casting line, in which the work pieces will be with the letters, groove, inner cavity or blind ...
-
Manufactured by Veenhuis Machines B.V.based in NETHERLANDS
The newly developed Ecoline slurry tanks offer the perfect introduction to slurry application. This model is standard prepared for the installation of a dripple bar linkage or trailing shoe distributor. The Ecoline stands out with the stable and high-quality construction. A good weight distribution ensures, even when hitching a wide dripple bar linkage or trailing shoe distributor in the rear, ...
-
Manufactured by Pomot Ltdbased in POLAND
The slurry tank type T 507 / 6 at capacity 5000 liters is a completely equipped machine ready to work. It doesn’t need any additional equipment to work. The vehicle is available in four versions: MINIMUM, STANDARD, CLASSIC and PREMIUM. MINIMUM version has a compressor at capacity 3000 L / min, and a pouring spoon with the splash plate. It has no suction hose 6m. STANDARD version is the ...
-
Manufactured by BSA GmbHbased in GERMANY
The Speedy trailing shoe distributor is a new, very light and inexpensive series from Bomech. This series is lighter than all other 12 m and 15 m trailing shoe distributors available on the market. The Speedy can be installed quickly and easily on new and used slurry tanks with trailing shoe preparation. The newly developed control for this distributor only requires a ...
-
Manufactured by Major Equipmentbased in IRELAND
This is the specialist tandem slurry tanker range from MAJOR. All MAJOR tankers are constructed from 6mm steel for maximum strength. These tankers sit upon high specification commercial axles. They are supplied with steering axles as standard for minimal ground compaction and easy ...
-
Manufactured by Agriprom BVbased in NETHERLANDS
The Agriprom slurry separator Pro-4 is constructed with highest standards out of stainless steel for all main parts with abnormal contact to the slurry. The slurry Separator Pro-4 is specified for the use with slurry and bio gas substrate in its normal consistency. It is excellent for the separation of solids and liquids within an operative range with a dry mass content above the drum screen ...
-
Manufactured by Bauer Röhren- und Pumpenwerk GmbHbased in AUSTRIA
The large and strong mixer blade operates just as effectively as a ships propeller. It sets the entire contents of your slurry pit into motion. Your valuable natural fertilizer is refined and homogenized in only a short time with no great effort. Not even thick crusts, sinking layers and heavy sediment are a problem. The mixer blades cutting edges handle such situations ...
-
Manufactured by Mick Moorbased in UNITED KINGDOM
5" jetter, fixed to the side of the slurry tank. Adjustable so can be directed to help break up crust. Connects to a 5" MALE Bauer coupling. The fixing brackets are adjustable to fit all makes of tank. Male Bauer/MZ flange shown in picture is extra. Condition: ...
-
Manufactured by Glenside Groupbased in UNITED KINGDOM
Slurri-morr is an easily applied freeze dried slurry inoculant. Introducing a consortia of naturally occurring micro-organisms. The sophisticated blend of micro-organisms acting in a symbiotic manner make Slurri-morr much more effectivethan a single species ...
-
Manufactured by Pompe Ferrari s.n.c.based in ITALY
Besides the slurry tank decompressors development, these alternative sliding vane compressors are suitably employed for the self-propelled sprinkler pipe emptying. On request, it could be outfit of high thermal resistance vanes. A oil-bath twin-gear multiplier increases the rotary motion of the motor power takeoff (PTO 540 RPM). Automatic standard drop-feed lubrication; on request it is supplied ...
-
Manufactured by MEPROZET Kościan S.A.based in POLAND
Meprozet Kościan can manufacture slurry tanks for mounting on vehicles delivered by the customer. Each order is realized in accordance to individual customers' needs, regarding tank's overall dimensions, equipment, colour, logo ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you