Soil Science Equipment For Agriculture Management Available In Newfoundland
-
ShowcaseManufactured by Jenfitch INC.based in USA
One of the major issues facing citrus fruit growers is a disease that effects the trees called citrus cankers. JC9450 has been used to effectively control the growth and infectious nature of citrus cankers. By increasing the oxidative energy in the root system and around the leaf & stem area, JC 9450 will fortify the plant’s natural resistances and healing properties by increasing the ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Kit provides researchers with a powerful portable tool for assessing growing conditions in soils and substrates. The WET Kit measures and displays 3 important variables that influence plant growth: water content, temperature and pore water conductivity (ECp) – the EC of the water available to the plant. The kit comprises a WET Sensor, an HH2 Moisture Meter (readout unit) and a carry ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
In just 5 seconds the WET Sensor checks 3 crucial variables that influence plant growth: water content, temperature and pore water conductivity (ECp), the EC of the water that is available to the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
- lower cost research-grade multi-parameter sensor - Measures moisture, temperature and EC - Digital SDI-12 for easy system integration - Rugged and low power - Accurate monitoring of soil conditions - Detachable and extendable cable system - 5 year warranty - The new digital multi-parameter WET150 soil sensor represents the culmination of forty years research and development at Delta-T Devices. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Dependable ± 3% soil moisture accuracy - Built in temperature measurement - Robust and buriable, with 5 year warranty. The SM150T measures soil moisture and temperature with research-grade accuracy. It offers stable, robust and reliable performance at a great price. The SM150T’s advanced patented electronics and tough build produce a highly dependable sensor with exceptional salinity ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the Rhizon soil moisture sampler we supply a range of miniature soil moisture samplers. The Rhizon samplers are used for repeated and reliable sampling of all dissolved components in the soil solution. The porous plastic material (PES) wets spontaneously and has standard 0.15 micron pores. The samplers are supplied with coextruded tubing (PE inside / PVC outside) 1 mm internal diameter, luer ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The ML3 ThetaKit provides researchers with a portable tool for highly accurate, near instantaneous measurement of moisture levels in soils and substrates. The ThetaKit is easy to use. Simply switch the connected HH2 Moisture Meter on, insert the probe pins fully into the soil, and press the HH2’s “read” button to display the moisture measurement. Readings can then be stored with ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
At Gouda Geo-Equipment, you can order our convenient static pore pressure meters. Use these to measure pore pressure in groundwater in the subsoil. The subsoil is an accumulation of multiple layers of different types of soil. Every soil type has its own unique properties resulting in stable and instable soils and individual permeability characteristics. This causes the ground water pore pressure ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The DL6 is a dedicated data logger optimised for use with Delta-T soil moisture sensors. It can be used with combinations of ThetaProbes, SM150 Soil Moisture Sensors, SM300 Soil Moisture Sensors and Profile Probes, and also accepts rain gauge and soil temperature probe inputs. Up to 16000 readings can be stored in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The kit comprises an SM150T* Soil Moisture Sensor, a dedicated HH150 Moisture Meter and a carry case. The cable and connector are watertight – an essential requirement for potentially wet environments. The HH150 Meter displays volumetric water content (% volume). Please note that although the SM150T Sensor has a built-in temperature sensor, the HH150 Moisture Meter does not measure or ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The new digital multi-parameter WET150 soil sensor represents the culmination of forty years research and development at Delta-T Devices. Through a number of key design innovations it delivers research-grade accuracy and build quality at a price point not previously thought possible. It is the ideal sensor for research of soil conditions – and for integration into SDI-12 environmental and ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Stomatal aperture is the dominant factor in the diffusion conductance of leaf surfaces, which controls both the water loss from plant leaves and the uptake of CO2 for photosynthesis. Measurements of diffusion conductance are therefore important indicators of plant water status and provide a valuable insight into plant growth and plant adaptation to environmental ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you