Soil Science Equipment For Agriculture Management Near Ethiopia
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil sampling for the determination of the presence of very volatile components such as benzene, toluene, xylene and chlorinated hydrocarbons should be executed with samplers that prevent the sample from being exposed to air. Preferably the sampling must be done without disturbance of the soilaggregates to prevent mixing with ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Set for pF determination with ceramic plates, minimal standard set, (0.1...15 bars of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Tensiometer set. Complete standard set for multiple measurements to a depth of 90 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the Rhizon soil moisture sampler we supply a range of miniature soil moisture samplers. The Rhizon samplers are used for repeated and reliable sampling of all dissolved components in the soil solution. The porous plastic material (PES) wets spontaneously and has standard 0.15 micron pores. The samplers are supplied with coextruded tubing (PE inside / PVC outside) 1 mm internal diameter, luer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are ...
-
Manufactured by METER Group, Inc.based in USA
Measuring canopy density can be problematic: There are several methods to measure how much light is intercepted by a canopy in order to determine if water loss is from evaporation or transpiration. There’s the hard way. There’s the expensive way. And then there’s the smart way: the ...
-
Manufactured by LI-CORbased in USA
The LI-3000C Portable Area Meter combines an easy to use readout console with the proven scanning technology of the LI-3000C sensor head to provide a powerful system for portable, non-destructive leaf area measurements. It utilizes an electronic method of rectangular approximation to provide 1 mm2 resolution. Leaf area, leaf length, average width, and maximum width are logged by the readout ...
-
Manufactured by METER Group, Inc.based in USA
The trouble with moisture release curves: Measuring soil water potential to create a moisture release curve has always been tricky. Even if you’re an expert at traditional methods, these measurements require a tremendous amount of work. Plus, you still face limitations—like a lack of data points—that affect the final result. Some methods take several months just to complete a ...
-
Manufactured by LI-CORbased in USA
The LAI-2200C Plant Canopy Analyzer calculates Leaf Area Index (LAI) and other canopy structure attributes from radiation measurements made with a “fish-eye” optical sensor (148° field-of-view). Measurements made above and below the canopy are used to determine canopy light interception at 5 angles, from which LAI is computed using a model of radiative transfer in vegetative canopies. An ...
-
Manufactured by METER Group, Inc.based in USA
To spray or not to spray? Now you know. Diseases and infections can destroy an entire crop, but at the same time, applying fungicides is costly and time-consuming. If you’re deciding when to spray by monitoring leaf wetness with a resistance grid sensor, you’ll have trouble accurately determining wetness duration without a lot of extra work. You need a sensor with automatic ...
-
Manufactured by METER Group, Inc.based in USA
The potential for error when measuring water potential. Measuring soil water potential is never easy. Traditional methods such as pressure plates or filter paper have always been problematic. Not only are they extremely time consuming, but both methods have issues with accuracy. That’s why we developed the ...
-
Manufactured by METER Group, Inc.based in USA
You need sensor longevity: Soil can be highly variable in space, requiring numerous measurements and frustrating amounts of your research dollars. Not to mention the extra cost and hassle of replacement sensors if you need long-term data. Make long-term, large sensor networks simpler, longer-lasting, and more affordable with the ultra-dependable TEROS 12 soil moisture and temperature ...
-
Manufactured by LI-CORbased in USA
During photosynthesis, plants use energy in the region of the electromagnetic spectrum from 400-700 nm. The radiation in this range, referred to as Photosynthetically Active Radiation (PAR), can be measured in energy units (watts m-2) or as Photosynthetic Photon Flux Density (PPFD), which has units of quanta (photons) per unit time per unit surface area. The units most commonly used are ...
-
Manufactured by Humintech GmbHbased in GERMANY
MICROSENSE® Swift contains natural organic acids, amino acids and fulvic acid with low molecular weight that can easily diffuse from the leaves to the plant to provide significant effects especially via foliar applications. It is highly efficient in transporting mineral elements, especially in fruit or grain cultures. In both annual and perennial plants, it provides macro- and micro-nutrients ...
-
Manufactured by LI-CORbased in USA
The LI-6400XT Portable Photosynthesis and Fluorescence System is the most referenced photosynthesis system worldwide in peer-reviewed literature. It has multiple advantages that make it the top choice for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you