Wet Sensor (Agriculture Monitoring) Equipment
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
In just 5 seconds the WET Sensor checks 3 crucial variables that influence plant growth: water content, temperature and pore water conductivity (ECp), the EC of the water that is available to the ...
-
Manufactured by Caipos GmbHbased in AUSTRIA
Leaf wetness sensor measures resistance between metal conductors that simulate the leaf surface. Sensor should be placed close to the plants open to impact of the rain and dew. Sensor reports wetness in 20 levels. 0 is completely dry 20 is completely wet. Advantage of Caipos leaf ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The LWS, manufactured by METER Environment, can detect small amounts of water or ice on the sensor surface for leaf wetness applications. Because the LWS measures the dielectric constant of the sensor’s upper surface, it can detect the presence of water or ice anywhere on the sensor’s surface. The LWS is designed to ...
-
Manufactured by Growlinkbased in USA
To spray or not to spray? Now you know. Diseases and infections can destroy an entire crop, but at the same time, applying fungicides is costly and time-consuming. If you’re deciding when to spray by monitoring leaf wetness with a resistance grid sensor, you’ll have trouble accurately determining wetness duration without a lot of ...
-
Manufactured by Rain Bird Corporationbased in USA
The Decagon Leaf Wetness Sensor (LWS) determines the presence and duration of canopy wetness, allowing you to forecast disease and protect the plant canopy. Because the Leaf Wetness Sensor measures the dielectric constant, droplets do not need to bridge electrical traces for the sensor to detect ...
-
Manufactured by OTT HydroMet - Veraltobased in GERMANY
The ADCON Leaf Wetness Sensor was developed to provide users with a robust and low-maintenance alternative to the traditional style sensors using sheets of paper or human or animal hair. A grid of conductive tracks, etched onto a Teflon-coated ceramic plate reliably simulates the surface of a leaf and outputs a range of readings between 0 and ...
-
Manufactured by Netsens s.r.l.based in ITALY
Parameters under measurement: leaf upper side wetness, leaf lower side wetness. Compatible with: MeteoSense/MeteoSense PRO Units, AgriSense/VineSense Units, AgriSense/VineSense wireless units. Item code, ...
-
based in AUSTRALIA
This sensor is adopted to test the wetness of plant leaf. It will work with PUTD IOT Technology’s Smart Agriculture Device to form site test appliance. By uploading data through wireless network, this combination will be further working with our cloud base IOT software platform(PUTD DSS) to provide the data view of leaf wetness of ...
-
Manufactured by Jauntering International Corporationbased in TAIWAN
The 3666 Leaf Wetness Sensor is used to measure leaf wetness with its grid-like, resistance-based sensor, which is ranging from 0 ( dry ) – 15 ( wet ). This sensor is a circuit board with interlacing gold-plated fingers. Condensation on the sensor lowers the resistance between ...
-
Manufactured by METER Group, Inc.based in USA
To spray or not to spray? Now you know. Diseases and infections can destroy an entire crop, but at the same time, applying fungicides is costly and time-consuming. If you’re deciding when to spray by monitoring leaf wetness with a resistance grid sensor, you’ll have trouble accurately determining wetness duration without a lot of ...
-
Manufactured by MTX Srlbased in ITALY
The leaf wetness sensor FAR75XXX detects the presence and duration of wetness on a leaf’s surface, enabling users to forecast disease and protect plant ...
-
Manufactured by GroPoint - by RioT Technology Corp.based in CANADA
The GroPoint™ Pro soil sensor is robust, reliable and highly accurate. It provides a cost-effective solution for measuring soil moisture, soil temperature, and salinity (electrical conductivity or EC). This SDI-12 soil moisture sensor also functions as a wetting front detector, providing a separate output for the wetting ...
-
Manufactured by TRM Sensors LLCbased in USA
TRM-CC is a liquid hydrocarbon sensor that responds to refined fuels (e.g. diesel, gasoline, jet fuel, naphtha) and to crude oil and natural gas condensates. TRM-CC will not respond to rain water, water condensation, snow-melt, salt water or other naturally occurring surface ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Kit provides researchers with a powerful portable tool for assessing growing conditions in soils and substrates. The WET Kit measures and displays 3 important variables that influence plant growth: water content, temperature and pore water conductivity (ECp) – the EC of the water available to the plant. The kit comprises a WET ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Sensor has crucial applications in precision horticulture and soil science research and is usable in both soils and growing substrates. It is exceptional in its ability to measure pore water conductivity (ECp), the EC of the water that is available to the ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
the moisture measurement. Readings can then be stored with a single button press (if required) – and downloaded to PC later. The kit comprises an ML3 ThetaProbe Soil Moisture Sensor, an HH2 Moisture Meter (readout unit), replacement sensor rods, and a carry ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The DL6 is a dedicated data logger optimised for use with Delta-T soil moisture sensors. It can be used with combinations of ThetaProbes, SM150 Soil Moisture Sensors, SM300 Soil Moisture Sensors and Profile Probes, and also accepts rain gauge and soil temperature probe inputs. Up to 16000 readings can be stored in ...
-
Manufactured by Kisvin Science Inc.based in JAPAN
also be connected, for example, leaf wetness sensor, soil moisture sensor, dendromter ...
-
by Wildeyebased in NEW ZEALAND
Designed to report the optimum time to cut hay. Includes accurate humidity sensor designed for long-term outdoors operation. Includes leaf-wetness ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you