Plant Canopy (Canopy Monitoring) Equipment
-
Manufactured by CID Bio-Science, Inc.based in USA
Your data through a new lens. The CID Bio-Science Plant Canopy Imager makes data collection a breeze, allowing you to focus on the metrics that matter. Crop optimization: Measure vegetative spectral response, estimate plant nutrition, water requirements, and plant stress to enhance crop yields. Forest productivity: LAI, PAR and ...
-
Distributed by DMP Ltd.based in SWITZERLAND
Non-destructive measurements of Leaf Area Index, Autonomous or wired optical sensor operation to accommodate numerous canopy types and sampling protocols, Calculates mean foliage inclination angle and canopy gap fraction, Accurate in most daylight conditions, Measures almost any canopy type with the appropriate sampling protocol, ...
-
Manufactured by Hangzhou Mindfull Technology Co.,Ltdbased in CHINA
Plant canopy analyzer TOP-1000, a menu-operated linear measuring meter of photo-synthetically active radiation (PAR), which can be used to measure the sunlight interception by plant canopy, investigate canopy luminous energy, study the relationship between luminous energy utilization and crop growth, yield, and ...
-
Manufactured by LI-CORbased in USA
The LAI-2200C Plant Canopy Analyzer calculates Leaf Area Index (LAI) and other canopy structure attributes from radiation measurements made with a “fish-eye” optical sensor (148° field-of-view). Measurements made above and below the canopy are used to determine canopy light interception at 5 angles, from which ...
-
Manufactured by Virtual Hydrometbased in INDIA
Owing to our profound experience in the industry, we have been able to offer our valued clients with Plant Canopy Analyzer. Our plant canopy analyzer endeavor convenient and flexible tools for calculating and analyzing incident and transmitted Photo synthetically Active Radiation (PAR) in Crop and Forest ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The SunScan Canopy Analysis System uses field measurements of Photosynthetically Active Radiation (PAR) in crop canopies to provide valuable information about Leaf Area Index (LAI) and biomass production. The SunScan canopy analyser is optimised for low regular canopies such as most agricultural crops. The 1m probe enables rapid ...
-
Manufactured by METER Group, Inc.based in USA
Stomatal conductance is complicated. Measuring it doesn’t have to be. Most measurements in the soil-plant-atmosphere continuum are fairly straightforward. Measuring stomatal conductance is not. And since stomatal conductance can’t be predicted from theory and must be measured, you need an instrument that’s easy to use. ...
-
Manufactured by METER Group, Inc.based in USA
To spray or not to spray? Now you know. Diseases and infections can destroy an entire crop, but at the same time, applying fungicides is costly and time-consuming. If you’re deciding when to spray by monitoring leaf wetness with a resistance grid sensor, you’ll have trouble accurately determining wetness duration without a lot of extra work. You need a sensor with automatic ...
-
Manufactured by METER Group, Inc.based in USA
Measuring canopy density can be problematic: There are several methods to measure how much light is intercepted by a canopy in order to determine if water loss is from evaporation or transpiration. There’s the hard way. There’s the expensive way. And then there’s the smart way: the ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The MQ-100 has a sensor integrated into the top of the hand-held meter that displays and stores measurements. Typical applications include PPFD measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments. ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The MQ-200 has a hand-held meter, attached via cable, that displays and stores measurements. The sensor head features a fully potted, domed-shaped design making it fully waterproof, weatherproof and self-cleaning. Typical applications include PPFD measurement over plant canopies in outdoor environments, greenhouses, and growth ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SQ-500 is a self-powered, analog full-spectrum quantum sensor with a 0 to 40 mV output. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser. Typical applications include PPFD measurement over plant ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The MQ-500 has a hand-held meter, attached via cable, that displays and stores measurements. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser. Typical applications include PPFD measurement over plant ...
-
Manufactured by Apogee Instruments, Inc.based in USA
(Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments. Quantum sensors are also used to measure PAR/PPFD in aquatic environments, including salt water aquariums where corals are ...
-
Manufactured by Apogee Instruments, Inc.based in USA
(Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments. Quantum sensors are also used to measure PAR/PPFD in aquatic environments, including salt water aquariums where corals are ...
-
Manufactured by Apogee Instruments, Inc.based in USA
(Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments. Quantum sensors are also used to measure PAR/PPFD in aquatic environments, including salt water aquariums where corals are ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SQ-212 is an amplified original quantum sensor with a 0 to 2.5 V output that has been calibrated for use in sunlight. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and growth ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SQ-222 is an amplified original quantum sensor with a 0 to 2.5 V output that has been calibrated for use with electric lights. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SQ-225 is an amplified original quantum sensor with a 0 to 5 V output that has been calibrated for use with electric lights. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, greenhouses, and ...
-
Manufactured by Apogee Instruments, Inc.based in USA
The SQ-110 is a self-powered, analog original quantum sensor with a 0 to 800 mV output that has been calibrated for use in sunlight. The sensor features a rugged, self-cleaning sensor housing design. Typical applications include PPFD (Photosynthetic Photon Flux Density) measurement over plant canopies in outdoor environments, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you