Forest Monitoring equipment for Agriculture Monitoring

The WinDIAS leaf area measurement system can measure percentage diseased leaf area, making it ideal for plant pathology, agronomy, phenotyping, plant physiology and forestry. Delta-T Devices was one of the first companies to develop leaf imaging technology for disease area estimation. The WinDIAS 3 Leaf Image Analysis System builds on that ...

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Plant Science Product line

The HemiView canopy image analysis system provides the hardware and software needed to acquire and analyse hemispherical images of forest canopies.

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Plant Science Product line

All Novus Cremation Systems feature an advanced PLC control system, designed to optimise the cremation process, reducing both process times and fuel consumption with no operator intervention required.

By Todaysure Matthews based in Hyde, UNITED KINGDOM. from Novus™ Human Cremation Systems Product line

Continuing to re-invent the wheel, Dutchman Industries Inc. is proud to have launched its new Roof Rack design. The solid sides increase strength and durability while the clean design make it easy to tie down tree heads. Round tubular skirting on the parameter allows the operator to tie all branches down and gently supports the head during travel. ...

By Dutchman Industries Inc based in Brougham, ONTARIO (CANADA). from Dutchman Tree Transplanting Truck Spade Options Product line

The Circumference Dendrometer 1 is the simpler version for the measurement of circumference changes of plants. The sensor is mounted on a wire cable with a very low coefficient of thermal expansion on the plant. The slide rings reduce the friction between the wire cable and the tree bark. They also decrease the pressure of wire cable on the tree.

By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

The DC2 and DC3 are the improved version of the DC1. The tension is not applied in a tangential, but in the radial direction. The pressure of the wire cable to the tree is independent of tree size. The data of different tree sizes are comparable. The sensor is mounted on a wire cable with very low thermal expansion coefficient at tree. The slide ...

By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

We are the oldest existing manufacturer of Side by Side Han/esters in the United States. We have used a lifetime of farming and harvesting knowledge to develop the fastest and most reliable harvesters on the market. Our machines are very versatile andean harvest many types of trees even in the toughest conditions. Our shaker pairs with the 90° ...

By Weldcraft Industries based in Terra Bella, CALIFORNIA (USA).

The largest of the Hitachi Forester family, the ZX370F-3 is a powerful force to be reckoned with. The purpose-built machine is equipped with a tough, next-class-up swing and travel system and a strengthened, rugged upper-structure and heavy-duty undercarriage. As opposed to retrofitted excavators patched together for logging use, Hitachi foresters ...

By Hitachi Construction Machinery Co, Ltd based in Moline, ILLINOIS (USA). from Foresters Product line

This model is optimized for for tree diameters of more than 5 cm. Automatic adjustment of the tension, sensitive measurements even with very large trees, pressure of the wire cable to the tree independent of tree size.

By MMM Tech Support GmbH & Co. KG based in Berlin, GERMANY. from Dendrometer Product line

A 6.5 HP Briggs and Stratton Intek I/C engine powers the six-bladed air turbine for maximum air flow and pick-up efficiency. The engine features throttle control, stop switch, ball-bearing on the PTO side, electronic ignition, oil dip-stick and durable lowtone muffler. Optional engines include the Briggs and Stratton 6.5 HP Intek Pro, Kohler CS ...

By Palmor Products Inc based in Thorntown, INDIANA (USA). from Truck Loaders Vacs Product line

The sensor is anchored by two special screws in the heartwood. The changes outside of the heartwood correspond to the radial growth. The arrangement ensures high stability for long-term measurements.

By Ecomatik based in Dachau/Munich, GERMANY. from Dendrometer Product line

IKONOS Satellite Sensor (0.82m) was successfully launched as the first commercially available high resolution satellite sensor on September 24, 1999 at Vandenberg Air Force Base, California, USA. Currently it is only possible to purchase IKONOS archive images.

By e-GEOS based in Roma, ITALY. from DigitalGlobe Product line

Forest planning may also consider areas substantially larger than a forest holding, like a province or autonomy. The analyses of these geographical scales are not usually based on compartment data but on a representative sample of plots. In Spain, the plots of the national forest inventory (NFI), measured at 1-km intervals in x and y directions, ...

By ForEco Technologies S.L. based in Solsona, Lerida, SPAIN.

Imagine being able to choose your receiver, your steering, and your controller. That is what choice is all about. ISOLynx is a dynamic controller. You do not have to repurchase components that you already have to use the ISOLynx controller.

By Ally Precision Industries based in Henderson,, NEVADA (USA).

Scatter100 – the new wireless signal-transmission system. Base station consisting of receiver incl. SD-card. Incl. 12Vdc-connection- and transmission-cable. Comes with 12V/24Ah battery. To collect data from sensor-modules (for soilmoisture, dendrometers, rH/airtemp/CO2, SDI12). Max. range 1000m, Frequency: 868-870MH. Available with ...

By UP Umweltanalytische Produkte GmbH based in Ibbenbüren, GERMANY. from Data Collection Product line

Imagine having a fast, powerful control system — right in the middle of the forest. The TimberRite 30Lite is a PC-based system integrating the control of the harvester/processor head with the measuring and bucking of timber. It displays all the information you need on a large color monitor, so with one glance you can see lengths, diameters, ...

By Waratah based in Kamloops, BRITISH COLUMBIA (CANADA). from Measuring and Control Systems Product line

The FLGS-TDP XM1000 system is a complete CR1000 based logger system for 32 TDP probes. The CR1000 is housed in a weather-resistant enclosure while collecting data under extremely harsh conditions. The AM16/32 Relay Multiplexer increases the number of sensors that may be scanned by the CR1000 data logger.

By Dynamax Inc based in Houston, TEXAS (USA). from Transpiration Sap Flow Product line

SCH - SCH/GT Stump cutter with a max working depth of 60 cm for tractors between 130 and 350 HP. The SCH stump cutter is the ideal solution for grinding stumps in harsh conditions in parks, backyards and rights-of-way. Low weight, combined with a belt transmission, results in extreme maneuverability, and makes the unit ideal for smaller jobs. The ...

By FAE USA, Inc. based in Flowery Branch, GEORGIA (US) (USA). from Stump Cutters Product line

Although the ZX210F-3 is our smallest forester, it is certainly no weakling. From its tough, next-class-up swing and travel systems, to the strengthened, rugged upper-structure and heavy-duty undercarriage, you’ll feel confident taking on any woods. Unlike retrofitted excavators patched together for logging use, Hitachi Foresters are built ...

By Hitachi Construction Machinery Co, Ltd based in Moline, ILLINOIS (USA). from Foresters Product line

For the measurement of short and long term changes in stem circumference, The DR26 Band Dendrometer is used to measure short and long term changes in stem circumference. The DR26 measures stems with a diameter greater than 8cm.The DR26 is a highly accurate dendrometer with a measurement resolution of 1μm (0.001mm) stem circumference change. The ...

By ICT International based in Armidale, AUSTRALIA.