Only show results available in Virginia? Ok

Hydroponics Monitoring Applications

  • Measuring Ion Concentrations in Hydroponics Samples

    Required Apparatus:

    • Aptisens Digital or Mobile Multiple Ion Kit

    Required chemicals:

    • Aptisens multiple ion conditioning solution
    • Aptisens multiple ion HORTICULTURE calibration solutions
    • Deionised water

    Sample Preparation:
    Typically, it is not a requirement to filter a hydroponics sample.

    Calibration:
    Before use the multiple ion probe must be conditioned in Aptisens multiple ion conditioning solution. Ensure the correct calibration solutions for a three-point calibration are set up on the Mobile meter or MeterLink. Follow the instructions for calibration and proceed to take a sample reading when the calibration data is ‘very good’ or ‘good’ for all ions.

    Sample Reading:
    Place the probe in the aqueous extract and ‘Take a Sample’ reading. The concentrations for each ion will be displayed in ppm or mmol / L.

    Probe Care:
    After taking your reading be sure to remove the sensors from the solution as quickly as possible, rinse with deionised water and replace the cap of the probe.

    By Aptisens based in Little Island, IRELAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you