Soil Salinity Monitoring Equipment For Agriculture Monitoring In Germany
-
PremiumManufactured by IMKO Micromodultechnik GmbHbased in GERMANY
TRIME-PICO IPH/T3 for precise measurement of moisture depth profiles. With TRIME-PICO IPH/T3 you determine moisture depth profiles fastly, reliably, non-destructively and completely without radioactive ratiation ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The WET Sensor has crucial applications in precision horticulture and soil science research and is usable in both soils and growing substrates. It is exceptional in its ability to measure pore water conductivity (ECp), the EC of the water that is available to the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS655 is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric-water content, bulk electrical conductivity, and temperature. It outputs an SDI-12 signal that many of our data loggers can measure. It has shorter rods than the CS650, for use in problem soils. Note: The cable termination options for this sensor are not suitable for use with an ET107 station. ...
-
Manufactured by AFS Agro Flow System GmbHbased in GERMANY
DS Logger 500 is a multifunctional device for measuring soil compaction, air temperature, and air humidity. Together with sensor DSM 600, it measures soil temperature, soil moisture, and soil ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS650 is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric water content, bulk electrical conductivity, and temperature. It outputs an SDI-12 signal that many of our data loggers can measure. Note: The cable termination options for this sensor are not suitable for use with an ET107 station. For this type of station, use the CS650-LC sensor instead, which ...
-
Manufactured by GeoPrecision GmbHbased in GERMANY
The new measerment procedure of the pF- meter is based on the registration of the volumetric heat capacity. A ceramic membran get in balance with the soil tensions. Inside the ceramic membran a special sensor measure continuously the water content, witch is adapted to the hydraulic potential. hereby the matrix potential can be measured active and directly, like a conventionally water filled ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The new digital multi-parameter WET150 soil sensor represents the culmination of forty years research and development at Delta-T Devices. Through a number of key design innovations it delivers research-grade accuracy and build quality at a price point not previously thought possible. It is the ideal sensor for research of soil conditions – and for integration into SDI-12 environmental and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Also included in our product range is the WET sensor, to measure pore water conductivity and temperature in the top layer of a soil. The measurement values are shown on the display of the hand held meter and can be stored in the memory (including time and sensor location). These data can be read on a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
EC-probe for soil salinity measurements, standard set for measurements to 1 m ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
In just 5 seconds the WET Sensor checks 3 crucial variables that influence plant growth: water content, temperature and pore water conductivity (ECp), the EC of the water that is available to the ...
-
Manufactured by Wintex Agrobased in DENMARK
The Wintex MCL3 is a strong and powerful soil sampler and has been selected by Ministries of Agriculture, national research institutes and leading contractors of many European countries for the work involved in complying with the EU's Nitrate Directive 91/676/EEC. The Wintex MCL3 is the successor of the well-know Geonor MCL3. It is manufactured in close co-operation with Geonor in Norway, who ...
-
Manufactured by Soilmoisture Equipment Corp.based in USA
Comes calibrated, with 4' long lead The Model 5000 Salinity Sensor consists of a pair of electrodes embedded in a fine-textured porous ceramic element. The water saturating the ceramic element remains in chemical equilibrium with the soil. The sensor is spring-loaded to ensure good hydraulic contact between the sensor and the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you