Tensiometer (Soil Water Monitoring) Equipment
-
Manufactured by Irrometer Company, Inc.based in USA
, creating vacuum measured by the gauge. This is a direct, physical measurement of the same tension plant roots experience, requiring no electronics, batteries, or calibrations to operate. IRROMETER tensiometers have been on the market since 1951 and are proven by decades of commercial usage and field research, trusted enough to serve as the ...
-
Manufactured by Irrometer Company, Inc.based in USA
Measuring soil moisture allows a grower to make informed irrigation scheduling decisions that will improve yields and quality while reducing water, fertilizer, labor, and energy costs. MLT IRROMETER’s are designed to operate in conditions where tensions above 30 cb (kPa) are not expected and compact size is needed such as containers or pots in greenhouse ...
-
Manufactured by Irrometer Company, Inc.based in USA
c ...
-
Manufactured by AMI Tens Ltd. (Formerly known as A.M.I Ltd)based in ISRAEL
A Tensiometer is a simple, but efficient, device for monitoring soil moisture. The Tensiometer reads soil water tension in the soil, which reflects the adhesion power of water to soil particles. The drier the soil, the higher is the measured tension and the plant needs more energy to uptake water. The obtained data helps the farmer to decide ...
-
Manufactured by MMM Tech Support GmbH & Co. KGbased in GERMANY
TX-E is an electronic TX Tensiometer for data-logging, offering a linear Voltage Signal 0 to 5V DC. Therefore TX-E can be used with every Data logger, which can read a Voltage Signal. The TX-E is available with and without additional analogue gauge. Measurement range is 0 to 1000 hPa soil water potential. Apart from this offers the model TX-E ...
-
Manufactured by AMI Tens Ltd. (Formerly known as A.M.I Ltd)based in ISRAEL
These are Tensiometers for manual use. They are simple, reliable, inexpensive devices for local readings. The vacuum gauge installed at the top, shows the soil water tension ...
-
Manufactured by Virtual Hydrometbased in INDIA
We are a paramount organization that is engaged in providing reliable Soil Tensiometer. Our Soil Tensiometer (Gauge Type) directly measures the friction at which water is held in soil, and therefore the suction plant roots need to apply in order to extract water. Our instrument are in tubular shape which comprises a water filled tube ...
-
Manufactured by AMI Tens Ltd. (Formerly known as A.M.I Ltd)based in ISRAEL
An Analog Tensiometer, is principally identical to any other Tensiometer, with one major difference: Instead of having a mechanical gauge there is an Electronic Vacuum sensor which we also name Analog Transducer, that transmits, via cable, vacuum readings to a computerized monitoring or control ...
-
Manufactured by Spectrum Technologies, Incbased in USA
Scheduling irrigation based on how hard plant roots are working to draw water from the soil. ...
-
Manufactured by SDEC Francebased in FRANCE
Accepted as the way to measure the water potential in soils, the tensiometer has become an easy to use and very handy tool for field research (agronomy) and managing inputs in agriculture (water). The SR 1000 tensiometer is robust as well as cost effective. Measurements are taken with a BOURDON type manometer. This measuring principle, easy to ...
-
Manufactured by SDEC Francebased in FRANCE
The SMS series tensiometric tubes are designed to be used with the electronic hand held meter, ref. SMS 2500S. SDEC France's tensiometer tubes are also compatible with all other tensimeters on the market (compatible outer ...
-
Manufactured by SDEC Francebased in FRANCE
The measuring technique with the SMS 2500S electronic pressure meter consists in piercing through a silicon bung closing a tensiometer, by means of a hypodermic needle, itself connected to a pressure transducer (or vacuumeter). This type of measure, both very precise and very economical (a unique appliance can be used on a great ...
-
Manufactured by MMM Tech Support GmbH & Co. KGbased in GERMANY
Tensiometers manufactured by Irrometer® meet highest expectations and have been continously optimized for more than 50 years. The Irrometer Tensiometers of the new generation are equipped with a new waterproof stainless steel manometer with improved pressure compensation, and read conveniently from top. The shaft offers an integrated ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The EQ3 Equitensiometer uses class leading ThetaProbe technology to avoid the many problems of water-filled tensiometers. It measures water potential (matric potential) in the range 0 to -1000 kPa and provides an accurate loggable output. It is particularly well suited for use in dry ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
A ceramic soil water sampler, often referred to as a ceramic cup or tensiometer, is a device used to measure soil water tension or suction in agricultural, environmental, and research applications. It helps monitor the moisture content and water availability in the soil, which is essential for proper irrigation management and understanding ...
-
Manufactured by MMM Tech Support GmbH & Co. KGbased in GERMANY
The Watermark Sensor is a robust, user-friendly sensor, maintenance free, frost proof and buffered against varying salt contents of soil solution. The cable can be spliced up to a total length of 100m. However its reaction time to soil moisture variations is somewhat slower than tensiometer or volumetric sensors. Interpretation of data is ...
-
Manufactured by O.I.Filtration Ltdbased in UNITED KINGDOM
OIFL supply a wide range of Porous Ceramics which are extensively used in various aspects of Soil Science. We offer two main Porous Ceramic material grades. These are Permalith and Hydralith. They offer varying air entry values depending on the pore size and porosity selected.Shapes range from cylinders, flat and round bottom cups, plates and rods. All with flexible sizes to suit your ...
-
Manufactured by Felix Technology Inc.based in CANADA
Equitensiometer FT3505.20 measures matric soil water potential. This is defined as the amount of work that must be done per unit quantity of pure water in order to transport reversibly and isothermally an infinitesimal quantity of water; identical in composition to the soil water, from a pool at the elevation and the external gas pressure of the point under consideration, to the soil ...
-
Manufactured by METER Group, Inc.based in USA
The trouble with moisture release curves: Measuring soil water potential to create a moisture release curve has always been tricky. Even if you’re an expert at traditional methods, these measurements require a tremendous amount of work. Plus, you still face limitations—like a lack of data points—that affect the final result. Some methods take several months just to complete a ...
-
Manufactured by Dynamax Incbased in USA
The DL6 is a dedicated soil moisture logger optimized for use with soil moisture sensors. It can be used with combinations of ThetaProbes and Profile Probes and also accepts rain gauge and soil temperature probe inputs. It is well suited to both research applications and irrigation monitoring. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you