Water Potential (Soil Water Monitoring) Equipment
-
Manufactured by Felix Technology Inc.based in CANADA
Equitensiometer FT3505.20 measures matric soil water potential. This is defined as the amount of work that must be done per unit quantity of pure water in order to transport reversibly and isothermally an infinitesimal quantity of water; identical in composition to the soil water, from a pool at the elevation and ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
Water potential describes the force that drives water movement. It is the most fundamental and essential measurement in soil physics. A water potential sensor is a solid-state electrical resistance sensing device that is used to measure soil water tension. As the tension changes with ...
-
Manufactured by METER Group, Inc.based in USA
The potential for error when measuring water potential. Measuring soil water potential is never easy. Traditional methods such as pressure plates or filter paper have always been problematic. Not only are they extremely time consuming, but both methods have issues with accuracy. That’s why we developed the ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The EQ3 Equitensiometer uses class leading ThetaProbe technology to avoid the many problems of water-filled tensiometers. It measures water potential (matric potential) in the range 0 to -1000 kPa and provides an accurate loggable output. It is particularly well suited for use in dry ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 229 is a sensor that measures soil water potential from -10 to -2500 kPa. It requires that you connect it to either the CE4 or CE8 current excitation module. A Campbell Scientific data logger controls the current excitation module, measures the sensor, and calculates soil water matric ...
-
Manufactured by MMM Tech Support GmbH & Co. KGbased in GERMANY
TX-E is an electronic TX Tensiometer for data-logging, offering a linear Voltage Signal 0 to 5V DC. Therefore TX-E can be used with every Data logger, which can read a Voltage Signal. The TX-E is available with and without additional analogue gauge. Measurement range is 0 to 1000 hPa soil water potential. Apart from this offers the model TX-E ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CE4 is a current-excitation module that applies a constant current to the heating element of up to four 229 Heat Dissipation Water Matric Potential Sensors. A current-excitation module is required when you use 229 sensors to measure soil water matric ...
-
Manufactured by METER Group, Inc.based in USA
The trouble with moisture release curves: Measuring soil water potential to create a moisture release curve has always been tricky. Even if you’re an expert at traditional methods, these measurements require a tremendous amount of work. Plus, you still face limitations—like a lack of data points—that affect the final result. ...
-
Manufactured by MMM Tech Support GmbH & Co. KGbased in GERMANY
reservoir for easy replacement of lost water in field. The ceramic tip is exchangeable. The Tensiometer is filled air-free with water, and reacts extra fast to changes in soil water potential. Recommended accessory: Irrometer Service ...
-
Manufactured by MMM Tech Support GmbH & Co. KGbased in GERMANY
, since measurement result is given in Centibar (soil water potential), valid for all soil ...
-
Manufactured by SDEC Francebased in FRANCE
Accepted as the way to measure the water potential in soils, the tensiometer has become an easy to use and very handy tool for field research (agronomy) and managing inputs in agriculture (water). The SR 1000 tensiometer is robust as well as cost effective. Measurements are taken with a BOURDON type manometer. This measuring principle, easy to ...
-
Manufactured by SDEC Francebased in FRANCE
conditions, of the amount of water needed and of the best moment to irrigate. The knowledge of water potentials is also very important when a control of groundwater ressources must be ...
-
Distributed by CaTeC BVbased in NETHERLANDS
The ProCheck meter is a hand where all Decagon sensorscan be connected. Through the installed bodemvochtopnemers to join in the field is possible to quickly obtain the location and sensors to check operation. real time data with a simple touch of the record button can be stored up to 5000 measurements date, time, and calibration values. the ProCheck can be set to the type of soil material, or may ...
-
Manufactured by SDEC Francebased in FRANCE
The SMS series tensiometric tubes are designed to be used with the electronic hand held meter, ref. SMS 2500S. SDEC France's tensiometer tubes are also compatible with all other tensimeters on the market (compatible outer ...
-
based in AUSTRALIA
. This device tests the soil suction (potential) and temperature. This sensor will work with PUTD IOT Technology’s Smart Agriculture Device to form site test appliance. By uploading data through wireless network, this combination will be further working with our cloud base IOT software platform(PUTD DSS) to provide the data view of soil suction (or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you