Soil Water Monitoring Equipment For Agriculture Monitoring In Australia
-
Manufactured by Campbell Scientific, Inc.based in USA
The LWS, manufactured by METER Environment, can detect small amounts of water or ice on the sensor surface for leaf wetness applications. Because the LWS measures the dielectric constant of the sensor’s upper surface, it can detect the presence of water or ice anywhere on the sensor’s surface. The LWS is designed to be deployed either in the canopy or on a weather station mast. Two ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 229 is a sensor that measures soil water potential from -10 to -2500 kPa. It requires that you connect it to either the CE4 or CE8 current excitation module. A Campbell Scientific data logger controls the current excitation module, measures the sensor, and calculates soil water matric ...
-
Manufactured by TerViva Inc.based in USA
Embracing Ponova™ food ingredients will help to address some of today’s greatest environmental challenges. Pongamia’s unique ability to sequester carbon, improve soil health and water quality while simultaneously avoiding deforestation enables us to feed the world’s growing population while taking care of the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS655 is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric-water content, bulk electrical conductivity, and temperature. It outputs an SDI-12 signal that many of our data loggers can measure. It has shorter rods than the CS650, for use in problem soils. Note: The cable termination options for this sensor are not suitable for use with an ET107 station. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CE4 is a current-excitation module that applies a constant current to the heating element of up to four 229 Heat Dissipation Water Matric Potential Sensors. A current-excitation module is required when you use 229 sensors to measure soil water matric ...
-
based in AUSTRALIA
This sensor is adopted to test the wetness of plant leaf. It will work with PUTD IOT Technology’s Smart Agriculture Device to form site test appliance. By uploading data through wireless network, this combination will be further working with our cloud base IOT software platform(PUTD DSS) to provide the data view of leaf wetness of ...
-
Manufactured by Hunter Industriesbased in USA
The Soil-Clik simplifies soil moisture sensing. The Soil-Clik probe uses proven technology to measure moisture within the root zone. When the probe senses that the soil has reached its desired moisture level, it will shut down irrigation, preventing water waste. Soil-Clik has two components: A moisture sensor probe, which is placed in the soil, and an electronic module, which communicates with ...
-
Manufactured by Vinidex Pty Ltd.based in AUSTRALIA
Polydex pipe is a rubber ring jointed Series 1 PVC-U pipe for pressure applications such as water supply, irrigation, pressure sewage and industrial applications. Polydex pipe is available in sizes from DN 50 to DN 375 in pressure classes from PN 4.5 to PN 12. Polydex rubber ring jointed fittings are fabricated from extruded pipe and/or moulded fittings, with factory assembled soIvent cement ...
-
by Wildeyebased in NEW ZEALAND
Designed to report the optimum time to cut hay. Includes accurate humidity sensor designed for long-term outdoors operation. Includes leaf-wetness ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS310 is a self-powered, analog full-spectrum quantum sensor with a 0 to 40 mV output. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design that includes an anodized aluminum body with an acrylic diffuser. Typical applications include PPFD measurement over plant canopies in outdoor environments, greenhouses, ...
-
based in AUSTRALIA
Soil environmental data monitoring is mainly suitable for agricultural cultivation in fields and greenhouses, suitable for soil, Long-term on-line monitoring of soil, especially through monitoring soil conditions, provides data support for planting, irrigation and management, and provides empirical data for better quality crop cultivation. This device tests the soil suction (potential) and ...
-
based in AUSTRALIA
Soil condition data test and monitoring is largely used in agricultural cultivation in fields and greenhouses, By long-term on-line monitoring of sandy soil, especially through monitoring soil conditions, this sensor provides data support for planting, irrigation and management, and provides empirical data for better quality crop cultivation. This sensor device is testing 3 critical parameters ...
-
Manufactured by Implexx Sensebased in AUSTRALIA
The Implexx Sap Flow Sensor is a sap flow sensor designed for growers. It is relatively easy to install and usually only requires maintenance once per season. Therefore, it allows growers to focus on more important tasks. The output from Implexx Sap Flow Sensor is whole tree water use in Liters per Hour which can be easily converted to Liters per Day, per Week, per Month or Season. It is also ...
-
Manufactured by Excel Agriculturebased in AUSTRALIA
With the widespread adoption of conservation farming techniques such as zero/minimum till and controlled traffic, modern farmers are finding themselves faced with both emerging challenges and opportunities in the broadacre farming industry. Improved soil structure, reduced water run off, better soil moisture retention are all by-products of the adoption of these conservation farming techniques ...
-
Manufactured by Hi-Tech Ag Solutions Pty Ltdbased in AUSTRALIA
A natural nutrition source of organic activated carbon with amino acids for soil biology/fertiliser coating and foliar to enhance crop ...
-
Manufactured by StollerUSAbased in USA
Bio-Forge ST seed treatment produces vigorous young plants and will keep mature wheat plants alive longer for a significant improvement in ...
-
Manufactured by Precision Seeding Solutionsbased in AUSTRALIA
Digging a few seeds per field doesn’t give you a complete picture of whether your depth setting is correct. SmartFirmer is a seed firmer-sensor that measures the amount of moisture available to the seed, so you can adjust your depth correctly and know you will have a consistent crop ...
-
Manufactured by Mottech Water Solutions LTD.based in ISRAEL
The Piccolo XR is a small sized wireless Remote Terminal Unit that operates as an integral part of the IRRInet system. The Piccolo XR operates up to 4 latched outputs and may receive up to 7 digital inputs (model dependent). The PIU (Piccolo Interface Unit) is connected to the IRRInet Field Unit, and communicates with Piccolo-XR units via its internal two-way low-power radio. The Piccolo XR and ...
-
based in AUSTRALIA
Soil condition data test and monitoring is largely used in agricultural cultivation in fields and greenhouses, By long-term on-line monitoring of sandy soil, especially through monitoring soil conditions, this sensor provides data support for planting, irrigation and management, and provides empirical data for better quality crop cultivation. This sensor device is testing Volumatic Water ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS650 is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric water content, bulk electrical conductivity, and temperature. It outputs an SDI-12 signal that many of our data loggers can measure. Note: The cable termination options for this sensor are not suitable for use with an ET107 station. For this type of station, use the CS650-LC sensor instead, which ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you