Soil Water Monitoring Equipment For Agriculture Monitoring In Alberta
-
Manufactured by Campbell Scientific, Inc.based in USA
The LWS, manufactured by METER Environment, can detect small amounts of water or ice on the sensor surface for leaf wetness applications. Because the LWS measures the dielectric constant of the sensor’s upper surface, it can detect the presence of water or ice anywhere on the sensor’s surface. The LWS is designed to be deployed either in the canopy or on a weather station mast. Two ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 229 is a sensor that measures soil water potential from -10 to -2500 kPa. It requires that you connect it to either the CE4 or CE8 current excitation module. A Campbell Scientific data logger controls the current excitation module, measures the sensor, and calculates soil water matric ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS655 is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric-water content, bulk electrical conductivity, and temperature. It outputs an SDI-12 signal that many of our data loggers can measure. It has shorter rods than the CS650, for use in problem soils. Note: The cable termination options for this sensor are not suitable for use with an ET107 station. ...
-
Manufactured by Cheiron Resources Ltdbased in CANADA
The OilScreenSoil™ tests are particularly useful for site investigators who require rapid delineation of spill depth and direction during response initiatives and immediate qualitative field screen/sampling tests for site investigations and excavation of "free phase" petroleum ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CE4 is a current-excitation module that applies a constant current to the heating element of up to four 229 Heat Dissipation Water Matric Potential Sensors. A current-excitation module is required when you use 229 sensors to measure soil water matric ...
-
Manufactured by Hoskin Scientific Limitedbased in CANADA
The WET150 Kit is a portable and rugged solution for researchers who need to assess moisture and salinity conditions in soils and ...
-
Manufactured by Hoskin Scientific Limitedbased in CANADA
The WET Sensor is used throughout horticulture, especially by soft fruit growers and for crops grown in protected environments, where correct growing conditions are critical to both yield and ?avour. The compact sensor can be inserted directly into the growing medium with minimal disturbance to either roots or shoots, and provides information for process optimisation, checking growing condition ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS310 is a self-powered, analog full-spectrum quantum sensor with a 0 to 40 mV output. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design that includes an anodized aluminum body with an acrylic diffuser. Typical applications include PPFD measurement over plant canopies in outdoor environments, greenhouses, ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS650 is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric water content, bulk electrical conductivity, and temperature. It outputs an SDI-12 signal that many of our data loggers can measure. Note: The cable termination options for this sensor are not suitable for use with an ET107 station. For this type of station, use the CS650-LC sensor instead, which ...
-
PremiumManufactured by AMS, Inc.based in USA
Get the best crop yield by measuring the extent and depth of subsurface ...
-
Manufactured by Teagle Machinery Ltdbased in UNITED KINGDOM
The TITAN range is well proportioned, ensuring excellent stability, manoeuvrability, visibility of the load, and superior ground ...
-
Manufactured by Teagle Machinery Ltdbased in UNITED KINGDOM
The TITAN range is well proportioned, ensuring excellent stability, manoeuvrability, visibility of the load, and superior ground ...
-
Manufactured by Hach - Veraltobased in USA
Soil and Irrigation Water Test Kit - Model SIW-1: A test kit for professional scientists and non-scientists alike, the SIW-1 Soil and Irrigation Water Test Kit is ideal for fertility analysis, site characterization, and irrigation water quality assessment under a wide variety of conditions. Farmers, researchers, extension agents, and educators can use the versatile test kit at remote sites, in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you