Soil Water Potential Equipment For Agriculture Monitoring In Germany
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The EQ3 Equitensiometer uses class leading ThetaProbe technology to avoid the many problems of water-filled tensiometers. It measures water potential (matric potential) in the range 0 to -1000 kPa and provides an accurate loggable output. It is particularly well suited for use in dry ...
-
Manufactured by Senect GmbH & Co. KGbased in GERMANY
The SENECT ORP Sensor XT1 measures the redox potential of water reliable and precise. The proven and well established principle of electrochemical measurements with electrodes is used by the XT1 to deliver accurate results with simple maintenance and calibration. Another advantage of the XT1: with its BNC plug, the electrode can be easily and cost-effectively replaced. The ORP Sensor XT1 is ...
-
Manufactured by METER Group, Inc.based in USA
The trouble with moisture release curves: Measuring soil water potential to create a moisture release curve has always been tricky. Even if you’re an expert at traditional methods, these measurements require a tremendous amount of work. Plus, you still face limitations—like a lack of data points—that affect the final result. Some methods take several months just to complete a ...
-
Manufactured by MMM Tech Support GmbH & Co. KGbased in GERMANY
The Watermark Sensor is a robust, user-friendly sensor, maintenance free, frost proof and buffered against varying salt contents of soil solution. The cable can be spliced up to a total length of 100m. However its reaction time to soil moisture variations is somewhat slower than tensiometer or volumetric sensors. Interpretation of data is easy, since measurement result is given in Centibar (soil ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 229 is a sensor that measures soil water potential from -10 to -2500 kPa. It requires that you connect it to either the CE4 or CE8 current excitation module. A Campbell Scientific data logger controls the current excitation module, measures the sensor, and calculates soil water matric ...
-
Manufactured by MMM Tech Support GmbH & Co. KGbased in GERMANY
TX-E is an electronic TX Tensiometer for data-logging, offering a linear Voltage Signal 0 to 5V DC. Therefore TX-E can be used with every Data logger, which can read a Voltage Signal. The TX-E is available with and without additional analogue gauge. Measurement range is 0 to 1000 hPa soil water potential. Apart from this offers the model TX-E all field approved properties of the analogue TX ...
-
Manufactured by IRRITEC SpAbased in ITALY
Manufactured using state-of-the-art machinery and materials; high-precision welding, cutting and piercing give maximum reliability. A protective coating of epoxy powder also gives the filter durability over ...
-
Manufactured by METER Group, Inc.based in USA
The potential for error when measuring water potential. Measuring soil water potential is never easy. Traditional methods such as pressure plates or filter paper have always been problematic. Not only are they extremely time consuming, but both methods have issues with accuracy. That’s why we developed the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CE4 is a current-excitation module that applies a constant current to the heating element of up to four 229 Heat Dissipation Water Matric Potential Sensors. A current-excitation module is required when you use 229 sensors to measure soil water matric ...
-
Manufactured by MMM Tech Support GmbH & Co. KGbased in GERMANY
Tensiometers manufactured by Irrometer® meet highest expectations and have been continously optimized for more than 50 years. The Irrometer Tensiometers of the new generation are equipped with a new waterproof stainless steel manometer with improved pressure compensation, and read conveniently from top. The shaft offers an integrated water reservoir for easy replacement of lost water in ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
Water potential describes the force that drives water movement. It is the most fundamental and essential measurement in soil physics. A water potential sensor is a solid-state electrical resistance sensing device that is used to measure soil water tension. As the tension changes with water content the resistance changes as well. That resistance can be measured using a water potential Sensor. The ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you