Applications available in Ethiopia

  • Premium

    Composting Systems for Institutional Kitchens

    Our clients are primarily tenant-owner`s associations, housing firms, building companies, schools and institutional kitchens

    By Joraform AB based in Laholm, SWEDEN.

  • Premium

    Composting Systems for Construction Sites

    Our clients are primarily tenant-owner`s associations, housing firms, building companies, schools and institutional kitchens.

    By Joraform AB based in Laholm, SWEDEN.

  • Spill containment for golf course & agriculture

    The SafeGuards line of spill containment products are used in agricultural and recreational industry applications that are regulated by the Dept of Agriculture to prevent ground contamination from fuels and excessive pesticides, herbicides and fungicides. Aerial applicators use the inexpensive Crop Duster transloading containment as a lightweight, foldable mobile containment system that sets up in minutes by a single person. No longer is there a need for equipment to place expensive, large, bulky and heavy metal or fiberglass composite containments that also require extensive room for winter storage.

    By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA).

  • Humic Acids for Aquaculture

    At fish breeding humic acids are known for long as an integral part of natural waters for the bio-logical improvement of the water quality. For this purpose peat based products were often used to optimize the pH with the containing humic acids. Huminc acids based products on base of lignite like HuminFeed® in the field of aquacultures are an object for research for many years yet. Within the research acitivities regarding the use of HuminFeed in aquacultures and ornamental fish breeding the following positive effects amongst others could be observed by the Leibniz-Institute of Freshwater Ecology and Inland Fisheries in Berlin:

    By Humintech GmbH based in Grevenbroich, GERMANY.

  • Peach-Post Fence

    Peach-Post Fence Ai Rui peach post fencing is composed by zinc plated then plastic coated panel and hot dipped zinc plated then plastic coated posts. Inserting hanger design make the post and panels a perfect unit. No joining parts are needed, it is connected with buttons pushing installation, simple and convenient. Ai Rui peach post for fencing has fine craftmanship, innovative and unique design. Loading proof design for caps and posts, TOX joint enables perfect connection of the two sheet layers, this ensures the zinc coating layer with no damage to the maximum extent. Ai Rui peach post fence is widely used for railway, factories, industry area, workshop isolation, civil engineering, residential area, sports field, airport, prisons and other isolations for various fields. Post sizes: 70mm*100mm*1.2mm; Mesh opening: 50mm*100m, 50mm*200mm, 55mm*100mm, 55mm*200mm, 60mm*100mm, 60mm*200mm; Wire diameter: Φ4.0mm, Φ4.5mm, Φ5.0mm, Φ5.5mm, Φ6.0mm; Out dimensions: High 800mm-4000mm* wide 2000m

    By Anping County Ai Rui Metal Wire Mesh Co.,Ltd based in Hengshui, CHINA.

  • Environmental technology for fertilizer production industry

    Recycling carbamate solution back to urea-reactors (Stamicarbon- and Snamprogetti-Processing Methods) will be done world-wide more or less exclusively with Körting high-pressure liquid jet ejectors (H.P.-ejectors). Multi-stage steam jet vacuum systems specifically designed to meet the requirements of urea evaporation stages have been in use for many decades now with great success. New developed boosters and vacuum condensers are available to provide an extremely economical and trouble-free operation.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Material handling equipment for chemical industry

    Petrochemical Manufacturing, Synthetic Rubber Manufacturing, Phosphatic Fertilizer Manufacturing.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Plastic Solutions to the Aquaculture Sector

    INTERMAS Aquaculture specialises in providing plastic solutions to the aquaculture sector. We offer a wide range of netting intended to meet all your needs, whatever your trade: mussel farming, shellfish farming or even oyster farming. Our range of products spans bags and protection, packaging and shade nets. We have expanded our range with new products and accessories for marine farming.

    By INTERMAS Group based in Llinars del Vallès, SPAIN.

  • Industrial Engineered Plastic for the Poultry Industry

    The poultry industry has become one of the fastest paced ever-changing businesses of today. We are a company able to change and adapt to the demands of this industry. Our capabilities in  injection molding and fabrication allow us to manufacture components in various materials.

    Materials:

    • Delrin (acetal)
    • UHMW-PE
    • Nylon
    • HDPE
    • Polypropylene

    We also recognize the quality and concern for FDA/USDA products. We are a large solution provider of cost-effective replacement parts for businesses such as:

    • OEM equipment
    • Distribution
    • End user processors

    By Diversified Plastics, Inc. based in Missoula, MONTANA (USA).

  • Cellulose Degradation & Composting

    Composting of Green Wastes: Reduction in the time to complete the composting process. Reduction in the weight, volume and odour of the compost material.

    By Cleveland Biotech Ltd. based in Stockton on Tees, UNITED KINGDOM.

  • Pi² Technologies for Composting

    Composting sites are likely to cause odour complaints in their neighbourhood. While the majority of odours from a composting site come from windrows in fermentation, for the closed sites, leachate ponds may represent nearly 90% of odour emissions.

    By Pi² Technologies Inc based in Montreal, QUEBEC (CANADA).

  • Industrial Engineered Plastic for the Agriculture Industry

    At Diversified Plastics, we recognize that in the agricultural industry, equipment is exposed to extremely harsh environments. Because of those environments, components on the equipment break down considerably sooner than in normal environmental conditions. Plastic offers many advantages in solving issues such as this.

    Benefits that plastic components offer:

    • Noncorrosive
    • Self-lubricating
    • Low friction
    • FDA/USDA approved
    • Cost effective
    • Abrasion resistant

    By Diversified Plastics, Inc. based in Missoula, MONTANA (USA).

  • GIS software for agriculture industry

    Balancing the inputs and outputs on a farm is fundamental to its success and profitability. The ability of GIS to analyze and visualize agricultural environments and workflows has proven to be very beneficial to those involved in the farming industry. From mobile GIS in the field to the scientific analysis of production data at the farm manager`s office, GIS is playing an increasing role in agriculture production throughout the world by helping farmers increase production, reduce costs, and manage their land more efficiently.

    By Esri based in Redlands, CALIFORNIA (USA).

  • Material handling equipment for wood industry

    Sawmills, Hardwood Veneer and Plywood Manufacturing, Softwood Veneer and Plywood Manufacturing, Engineered Wood Member (except Truss) Manufacturing, Millwork, Wood Window and Door Manufacturing, Cut Stock, Resawing Lumber, and Planing, Other Millwork (including Flooring) Wood Container and Pallet Manufacturing, All Other Wood Product Manufacturing.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Liners for Aquaculture / Aquacultery Hatchery Liners

    MPC Containment’s Aquaculture/Hatchery Liners allow for a controlled environment to minimize disease.  The liner must not emit any harmful chemicals and in many cases, it must confirm to FDA or other stringent requirements and regulations.  The liner must have excellent puncture and tear resistance. The liner must be fabricated and installed so that it is watertight as preventing seepage can be a major cost savings.  MPC recommends Reinforced Polypropylene or PetroGard™ VI for these applications as they meet the criteria listed above.

    By MPC Containment based in Chicago, ILLINOIS (USA).

  • Milking Machines

    Portable Milking Machine Milking Machine :SBSP30 Single Bucket 30 lt Single Pulsator (Aluminium) Milking Machine :SBSP30 Single Bucket 30 lt Single Pulsator (Chrome) Milking Machine :SBSP40 Single Bucket 40 lt Single Pulsator (Aluminium) Milking Machine :SBSP40 Single Bucket 40 lt Single Pulsator (Chrome) Milking Machine :SBDP40 Single Bucket 40 lt Double Pulsator (Aluminium) Milking Machine :SBDP40 Single Bucket 40 lt Double Pulsator (Chrome) Milking Machine :SBDP40G Single Bucket 40 lt Double Pulsator (Aluminium) with Gasoline Engine Milking Machine :SBDP40G Single Bucket 40 lt Double Pulsator (Chrome) with Gasoline Engine Milking Machine :DBDP40 Double Bucket 40 lt Double Pulsator (Aluminium) Milking Machine :DBDP40 Double Bucket 40 lt Double Pulsator (Chrome)

    By Agrozenit Agricultural Equipment based in Selcuklu / Konya, TURKEY.

  • Pumping solutions for vacuum conveying within meat

    When you need to transport meat products and waste over longer distances within cattle, chicken and pig abattoirs, energy consumption is a major consideration. The unique Samson vacuum conveying system with liquid ring pumps is not only extremely efficient it is also both highly energy efficient and gentle to the products.

    By Samson Pumps A/S based in Viborg, DENMARK.

  • Flow Monitoring for Golf Course Irrigation

    A new TTFM 1.0 Transit Time Flowmeter monitors and logs irrigation water pumped to sprinklers at Summerheights Golf Links. The clamp-on flowmeter is used to comply with a Ministry of Environment permit.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Scale prevention in irrigation

    By Fluid Dynamics International Ltd based in Maidenhead, UNITED KINGDOM.

  • Forest Assessor

    An easy-to-use e.Cognition ruleset to fully measure tree parameters. This ruleset has been developed and applied during the course of various projects with a large German State Forest Administration and other private forest owners. It is designed to create a polygon shapefile representing single tree crowns. It can process all types of forest stands, including very young and mature stands simultaneously. During the processing, a stand is divided into homogeneous groups based on tree height. Each group is then processed separately using different sets of variables. These variables can be adjusted by the user. If you wish to adjust and further develop the ruleset to meet specific conditions (such as the use of different RS data or local stand conditions), or if you wish to automatically measure all numeric crown parameters with ATLAS (a helpful tool to analyse the point cloud of the detected crowns), please address your request to office@landconsult.eu.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you