Applications available in Louisiana

Controls algae: The LG Sonic technology will retain a 90% algal reduction in your fish tanks in a environmentally friendly manner without the use of chemicals.

By LG Sonic based in Zoetermeer, NETHERLANDS.

The LG Sonic technology provides a solution to control algae growth in water reservoirs without maintenance or chemicals so clogging of pumps, filters and sprinklers is being reduced.

By LG Sonic based in Zoetermeer, NETHERLANDS.

Agricultural waste materials like wheat and rice straw, EFB, and bagasse etc. can be sold and used as animal feed, as fuel for kilns and small power plants. and for the production of ethanol. Unfortunately these materials are not easy to compact using traditional agricultural type balers. Macpresse balers have successfully been used in several countries, i.e. Japan, Korea, China, Sudan for transport and storage. Bale weights of up to 2 tons have been achieved.

By Macpresse Europa S.R.L based in Vernate, ITALY.

Control algal growth cost-efficiently and increases agriculture productivity.

By LG Sonic based in Zoetermeer, NETHERLANDS.

Control Composting Odors, Naturally: Municipal sludge is often composted in indoor facilities or composting sheds. These areas create significant odor control challenges. Ecosorb products, either evaporated or atomized in concentrate form with nozzles or humidifying fans, control industrial odors even in very large composting facilities.

By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

Control algae and increase the aesthetic appearance of the golf course pond.

By LG Sonic based in Zoetermeer, NETHERLANDS.

`A technique of growing plants in nutrient solution”. Hydroponics literally means water-working or water-activation. It is a cultivation technique for growing plants in highly oxygenated, nutrient enriched water, rather than soil. The nutrient solution and its management are the cornerstone for a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. In soil, biological decomposition breaks down organic matter into basic nutrients that plants feed on. Water dissolves these nutrients which allows uptake by the roots. For a plant to receive a well balanced diet, everything in the soil must be in perfect balance.

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

During the processes in the aqua feed industry large air volumes are emitted containing a lot of smelly components. This can cause annoyance in the surrounding neighbourhood.

By Aerox B.V. based in Vleuten, NETHERLANDS.

The animal feed industry produces a wide variety of feed and grains, applying different raw materials. Especially the cooling air of poultry and pig feed production should be deodorized to prevent complaints.

By Aerox B.V. based in Vleuten, NETHERLANDS.

The DESMI ROTAN® pumps are used for pumping of different sugar products from cane and beet juice to molasses and finished sugar solutions. The sugar products supplied direct from the sugar mill is chemically neutral whereas imported sugar products may contain small amounts of formic or sulphuric acid in order to prevent fermentation during transportation. Sugar products containing acid may cause corrosion in cast iron pumps so in some cases stainless steel pumps should be used. Sugar products have to be considered an abrasive liquid which is why the pump material has to be of wear resistant material. Viscosity of sugar products lies between 500 and 20,000cSt dependent on temperature and dry matter (BRIX). Therefore, it is recommended to pay special attention to the viscosity in relation to temperature when selecting a pump. Seal less pumps has been successfully used and to prevent bearing problems the pumps should be dimensioned to approximately 30 per cent of maximum speed.

By DESMI A/S based in Noerresundby, DENMARK.

By Analytik Jena AG based in Jena, GERMANY.

Highly pigmented foods, such as spinach, require cleanup prior to analysis for pesticide residues. A dual-layer SPE tube containing graphitized carbon and aminopropyl on silica (NH2) is often used because; Carbon removes pigments and sterols and NH2 removes fatty acids, polar pigments, organic acids, and sugars. Removing these matrix materials reduces interferences that can lead to ion suppression in LC-MS, inlet contamination in GC-MS, and column contamination for both techniques. Our Supel Sphere Carbon/NH2 SPE tube uses spherical materials for both the carbon and NH2 layers, providing fast, more consistent flows compared to tubes containing granular material. This allows gravity elution (instead of vacuum elution) to be applied to Supel Sphere tubes, resulting in more contact time between extracts and sorbents.

By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

Maintain healthier ponds, increase stocking densities, and generate higher yield with optimum oxygen transfer. Maintaining the proper level of oxygen dispersion in your systems is critical to the success of your operation – and the life of your fish. Poor dissolved oxygen levels, fluctuating water temperatures, and stratification all can negatively affect fish health and pond production.

By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

The animal feed industry has its roots in the way traditional millers grinded the grains centuries ago, using (wooden) windmills. Nowadays feed is produced for chickens and other poultry, as well as for cattle, pigs and horses. There is a wide variety of feed and grains produced, with different raw materials (nutrients) applied in several compositions.

In this modern era electric driven pellet mills are applied and grains are cooled mainly in counterflow coolers. To remove dust from the used cooling air usually a baghouse filter is being used which can meet the current severe dust emission standards. After this the air eventually will be blown outside. Especially the cooling air of poultry feed and pig feed production should be deodorized to prevent complaints.

A factory usually has multiple pellet lines in service with about 15,000 to 25,000 m3/h of cooling air per line. Aerox has developed specific solutions for this industry.

On the one hand a compact Aerox®-Injector can be installed per pellet line. On the other hand, airflows of different production lines can be joined together and can be treated with one compact Aerox®-Injector. In practice, this can be added up to 4 lines with a total airflow of up to 90,000 m3/h.

Since the Aerox®-Injector can run on different capacities unnecessary power consumption is prevented when not all pellet lines are in service. This benefits the environment and reduces operational costs.

By Aerox B.V. based in Vleuten, NETHERLANDS.

Fungicide carbendazim can some times be used to combat mold on citrus fruits including oranges. Recently, low residue levels of the fungicide were reported to be present in the bulk orange juice import shipments to the USA. Because this compound can persist through processing steps and may be found in the final consumer product, many government agencies have established maximum residue limits (MRLs) to ensure the safety of their population. Presented here is a single method, involving fast and effective QuEChERS cleanup, suitable for various orange juice matrices. The choice of PSA/C18 sorbents reduced interferences, resulting in greater recoveries and less ion-suppression. Because the QuEChERS method is fast, it only adds a few minutes to the sample preparation procedure. Sample processing using QuEChERS with PSA/C18 allows analysts to accurately process various matrices in a single workflow, with very little additional sample preparation time.

By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

A group of 30 compounds was selected, representing pesticides, acaricides, insecticides, and fungicides. These samples were analyzed using Supel™ QuE QuEChERS and an Ascentis® Express RP-Amide HPLC Column.

By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

TenCate Geotube technology is used for agriculture applications to reduce the waste in lagoons and utilize the contained nutrients for crops. This dewatering technology reduces the lagoon size by 50%, reduces labor and energy for land application by 50-70%, stores contained nutrients until needed for crops, provides higher quality flush water and reduces the odor and insect problems normally encountered. Over time, these solids dry in the dewatering containers, making the contained nutrients easier to transport and apply to crops.

By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

Transportable pump units The pump and motor come built together in a compact unit that is easy to move. Typically, self-priming pumps are used. The pump can be combined with electric motor, diesel or gasoline engines including battery and fuel tank. Transportable pump systems can be supplied as explosion-proof. Complete container The complete sprinkler or fire pump system can be supplied mounted in a container with all internal piping leading through to the container wall ready for assembly with the supply line and pressure pipe. Stationary sprinkler pumps with electric motor or diesel engine The complete unit comes on a base plate construction, and as pumps are also designed for diesel operation, you can choose between assembly with electric motor or diesel engine. The pump and motor are built together on the base plate via a flexible coupling.

By DESMI A/S based in Noerresundby, DENMARK.

Your partner from vine, to barrel, to bottle. Wine production generates a wide variety of challenges managing wastewater throughout the year, and decades of helping winemakers has taught us that no two winery wastewater treatment systems are alike. In the face of increasing scrutiny from regulatory agencies, along with water, energy, and sustainability initiatives, we understand why you might feel like your focus is shifting from winemaking to wastewater management. That’s where we can help.

By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

Need to maximize yield from your raw materials? Improve the purity of your product? Create the next future trend in taste and texture? Whatever your specific need, our aim is to put all the right solutions at your fingertips to ensure success. How can we help you? Irrespective of end products, our customers demand a customized solution for their solid/liquid separation and automation challenges. An approach where the starting point is not a separator, decanter, or filter press, but rather a careful evaluation of their objectives. And it all starts with a frank discussion about end product quality, efficiency, capacity, processes, and local support – we call it 360 degrees of separation.

By ANDRITZ Separation - a division of the Andritz Group based in Graz, AUSTRIA.