Applications available in West Virginia

  • Premium

    Erosion control solutions for the hydraulic applications/seeding areas

    Hydraulic Erosion Control Products (HECPs) are engineered mulch applied to slopes to reduce soil erosion while assisting in the establishment and growth of vegetation. An alternative to temporary Erosion Control Blankets (ECBs), hydraulically applied products can be installed up to three times faster using one-third the manpower. North American Green`s HECPs are applied in a one-step application with seed and fertilizer, with the potential for quicker installation and project cost savings compared to products requiring a two-step application. With our selection of HydraMax Systems HECPs, we can help you comply with the Environmental Protection Agency’s (EPA) effluent guidelines.

    By North American Green based in Poseyville, INDIANA (USA).

  • Premium

    Gas Sensing for Horticulture

    Controlled Environment Horticulture is a vast topic, and has been utilised in varying forms for centuries. Excavations of the city of Pompeii showed remains of early greenhouses dating back to AD79; and the modern greenhouses are thought to originate in the thirteenth century in Italy. Most people recognise the use of greenhouses for growing flowers and vegetables, whether in their own garden, at garden centres or on a commercial basis. Indeed most people will be conversant with irrigation systems that are used to supply water to such greenhouses and the use of heaters to control the temperature and thereby extend the growing season. However, modern systems have been developed for Controlled Environment Horticulture that are designed to further optimise the growing conditions; with sophisticated computer controlled sensors, combined with advanced software models, that can control not only the temperature, light level and water, but also the level of nutrients, humidity, pH and CO2

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Vegetation removal

    Floating and rooted vegetation and a muddy bottom can be effectively cleaned by using the rake. Loading can be done e.g. either on to barges or on to a nearby shore.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Premium

    Wastewater treatment for the milk industry

    Waste water containing fat and oils, generated from the cleaning of equipment and installations and from the sterilization process. Our equipment can be adapted to the highest loads produced by the whey`s pouring.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Premium

    Determination of whey proteins in milk samples by capillary gel electrophoresis

    One of the tests for authenticity of milk and dairy foods is the qualitative and quantitative composition of whey proteins and their ratio. Caseins dominate in cow’s milk before its processing (about 80% of total protein), whereas caseins are almost absent in the whey composition whose main components are the following:

    • β-lactoglobulins
    • α-lactalbumin
    • bovine serum albumin
    • immunoglobulins
    • lactoferrin and other minor proteins. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Determination of caffeine and theobromine in tea, coffee, cocoa, and herbal products

    The determination of caffeine and theobromine content in tea, coffee, cocoa, foodstuffs and in herbal products ensures safety and quality control of the products and identification of adulterants. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Quality control of milk products

    In order to maintain high quality of milk products, it is necessary to monitor process quality as rapidly as possible, so that a relevant technological process could be promptly corrected. The most important quality factors of milk products are fat, protein, moisture (total solids), SNF, sugar, salt, lactose and titrated acidity. Commonly, it takes a few hours to make such type of analyses by traditional methods. The use of an InfraLUM® NIR analyzers reduces the analysis time to a couple of minutes.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Quality control of milk and milk products

    In order to maintain high quality of milk products, it is necessary to monitor process quality as rapidly as possible, so that a relevant technological process could be promptly corrected. The most important quality factors of milk products are fat, protein, moisture (total solids), SNF, sugar, salt, lactose and titrated acidity. Commonly, it takes a few hours to make such type of analyses by traditional methods. The use of an InfraLUM® NIR analyzers reduces the analysis time to a couple of minutes. 

    The method is based on measuring the transmission spectrum of a sample in the near-IR spectral region and subsequent determination of the analyzed parameters/constituents using a calibration model. Transmission measurement provides highest accuracy and reproducibility of the measurements. 

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Air filtration and gas purification solutions for post-harvest

    In the current fruit and vegetable market, transporting and warehousing produce for long periods of time is a common practice. Ensuring that the environment in which they are stored is optimal during these periods is critical if damage and spoilage leading to loss of produce is to be avoided.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Premium

    Measurement of oil content in jatropha curcas seeds for energy/environment sector

    The use of biofuels as a substitute for mineral petroleum-based fuels is now an important part of the world economy. This substitution process both minimises the use of irreplaceable mineral petroleum reserves and reduces the addition of carbon dioxide to the atmosphere. Jatropha Curcas seeds are a high oil content seed and are of particular interest since the plants grow on almost any terrain and do not compete for agricultural land required for food crops. The maximisation of oil content is the driving force behind oil seed breeding programmes and the measurement of oil in Jatropha seeds is important in both trading and processing. In both of these cases, a simple and reliable means of measuring the oil content of the seeds is required.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Manure treatment for the composting industry

    By Eggersmann GmbH based in Wardenburg, GERMANY.

  • Premium

    Restricting Birds and Wildlife -

    Prevent birds and wildlife from entering dangerous areas, as well as preventing mess and liabilities from animal mess. Bird-X products reduce and eliminate birds and wildlife from entering unwanted or dangerous areas for the good of all parties involved. Birds and animals are not harmed by Bird-X products - which are designed to make areas uncomfortable and unwelcoming to animals, forcing them to go elsewhere. Bird-X products have been developed since 1964, hold an excellent BBB rating, and we offer GSA Advantage. Bird-X products are humane, environmentally preferred, poison and trap free, and sold in over 160 countries. The unique line cover both small and large spaces, indoor and out, and include electronic repellers, lasers, and physical barriers.

    By Bird-X Inc. based in Chicago, ILLINOIS (USA).

  • Premium

    Composting Systems for Institutional Kitchens

    Our clients are primarily tenant-owner`s associations, housing firms, building companies, schools and institutional kitchens

    By Joraform AB based in Laholm, SWEDEN.

  • Premium

    Composting Systems for Construction Sites

    Our clients are primarily tenant-owner`s associations, housing firms, building companies, schools and institutional kitchens.

    By Joraform AB based in Laholm, SWEDEN.

  • Premium

    Corrosion control for irrigation

    By InduMar Products, Inc. based in Houston, TEXAS (USA).

  • Premium

    Recycling Solutions for the food industry

    The right ingredients for your success in the food industry. Need to maximize yield from your raw materials? Improve the purity of your product? Create the next future trend in taste and texture? Whatever your specific need, our aim is to put all the right solutions at your fingertips to ensure success. How can we help you?. Irrespective of end products, our customers demand a customized solution for their solid/liquid separation and automation challenges. An approach where the starting point is not a separator, decanter, or filter press, but rather a careful evaluation of their objectives. And it all starts with a frank discussion about end product quality, efficiency, capacity, processes, and local support – we call it 360 degrees of separation.

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY.

  • Premium

    Micro-optics & services for industrial sector

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Agriculture Biogas Plant Modeling

    By inCTRL Solutions Inc. based in Oakville, ONTARIO (CANADA).

  • Premium

    Industrial valves solutions for the bulk solids industry

    Applications in the bulk solids sector make high demands to the components which are mounted in the plant. On the one hand for sensitive fluids like milk powder or tea leaves the gentle product handling is of paramount importance. On the other hand high abrasive fluids like quartz sand or porcelain slurry make the highest demands to the abrasion resistance of the used materials.

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you