In continuous production systems, the additives are frequently fed to a mixer using the gravimetric dosing process. This requires both high dosing accuracy and consistency. You have the optimum recipe – we have the right weighing and feeding solution for even your most complex tasks.
The combination of know-how, field-proven technology and many years of experience enables Schenck Process to offer customers within the fertiliser industry tailor-made solutions.
By Schenck Process Group based in Sandnes, NORWAY.
Recycling carbamate solution back to urea-reactors (Stamicarbon- and Snamprogetti-Processing Methods) will be done world-wide more or less exclusively with Körting high-pressure liquid jet ejectors (H.P.-ejectors). Multi-stage steam jet vacuum systems specifically designed to meet the requirements of urea evaporation stages have been in use for many decades now with great success. New developed boosters and vacuum condensers are available to provide an extremely economical and trouble-free operation.
By Körting Hannover AG based in Hannover, GERMANY.
Hydraulic Erosion Control Products (HECPs) are engineered mulch applied to slopes to reduce soil erosion while assisting in the establishment and growth of vegetation. An alternative to temporary Erosion Control Blankets (ECBs), hydraulically applied products can be installed up to three times faster using one-third the manpower. North American Green`s HECPs are applied in a one-step application with seed and fertilizer, with the potential for quicker installation and project cost savings compared to products requiring a two-step application. With our selection of HydraMax Systems HECPs, we can help you comply with the Environmental Protection Agency’s (EPA) effluent guidelines.
By North American Green based in Poseyville, INDIANA (USA).
MixRite Water Driven Injectors are water powered proportioning pumps that require no electricity and deliver accurate dispensing across varying water pressure and water flow and are ideally suited for in-line injection. MixRites are available in a number of models with injection rates from 0.1% to 10%, different sizes for water flow from .08 gpm (3L per min.) to 110 gpm (415L per min.), and various materials to withstand a multitude of aggressive acids, alkalines and solvents. MixRites have numerous in-line applications including sanitizing, cleaning and lubricating processing equipment, in-line application of vehicle wash chemicals, in-line addition of fertilizer, insecticides and pesticides for agriculture and irrigation, dosing of livestock vitamins into the water supply and in-line addition of machine tool coolants and water based lubricants for metal processing plus many more.
By DEMA Engineering Company based in Saint Louis, MISSOURI (USA).
Intensive commercial shrimp farming began in the late 1960s led in part by technological advances and growing market demand. Today, shrimp farming is so intensive (in some cases close to 300 000 shrimps per hectare) that it requires industrially prepared shrimp feeds, fertilizing the ponds to stimulate the growth of organisms, aeration to prevent oxygen depletion and regular tidal water exchange. Solmax geomembranes have been used in some of the largest shrimp pond projects in the world. There are several key benefits of lining shrimp ponds with geomembranes. Durable and robust, the HDPE surface prevents weeds, grasses, mud and other obstructive contaminants from entering the pond. The HDPE substrate is known to reduce the suitability of the environment for bacteria thereby reducing the need for antibiotics. Geomembranes can also protect the slopes and banks from erosion and allow for easy detection and rapid removal of sediment and waste products.
Here are several factors to consider when deciding which type of geomembrane to use in a Shrimp Pond application:
- Stress crack resistance
- Tensile and elongation properties
- Tear and puncture resistance
- Duration of the project
- U.V exposure
Please contact us if you need technical support or need to speak with a sales representative.
By Solmax based in Varennes, QUEBEC (CANADA).
TeraFlo® significantly reduces watering requirements per cycle of irrigation while maintaining adequate moisture for good plant health and growth. Due to its filtration properties, excessive moisture also flows through the soil thereby preventing environments for fungal growth. It draws moisture from the air and the surface and attaches itself to the plant roots from sources not previously available. It provides proper wetting and drainage in non-soil media as well as eliminating unusable water. TeraFlo® dramatically improves the ability of rainfall and water to easily penetrate the soil surface and gain access to the root zone. By encapsulating the soil particles, it significantly decreases friction allowing for easy and rapid water penetration and filtration into any soil condition; hardpan, compacted or otherwise. It improves the efficiency of all applied additives (pesticides, insecticides nutrients, etc) preventing rapid leaching of these products. This increases their effectiveness and reduces over all application quantities making additive usage far more cost effective. Holding organophosphates in the soil reduces the leaching of these toxins which significantly improves their performance. The product has a special affinity to nitrogen thereby reducing nitrate leaching protecting against groundwater contamination. TeraFlo® prevents the buildup of soluble sodium salts contained in fertilizers and water sources thereby reducing stress conditions. Continual use will keep the root zone free of sodium salts. TeraFlo® increases microbial activity which aids in root cell buildup resulting in faster uptake of nutrients. TeraFlo® reduces soil erosion from in-furrow irrigation and significantly reduces nitrogen loss in head ditch irrigation systems. TeraFlo® improves drip applied fumigant systems allowing for a more efficient and longer release system. Teraflo provides lubrication to pump parts, valves, and other parts of pressurized water systems preventing products in the irrigation piping from sticking to the walls, thus reducing drip and irrigation head clogging. This reduces downtime, repair costs, and maintenance.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you