Only show results available in Virginia? Ok

irrigation flow Applications

  • Premium

    Flow Monitoring for Golf Course Irrigation

    A new TTFM 1.0 Transit Time Flowmeter monitors and logs irrigation water pumped to sprinklers at Summerheights Golf Links. The clamp-on flowmeter is used to comply with a Ministry of Environment permit.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • HYDROFLO & PumpBase

    HYDROFLO is a powerful software tool that assists piping system designers in the modeling and analysis of pumped and gravity flow piping systems. These systems are commonly found in industrial process, water supply, wastewater treatment, fire protection, chemical process, mine de-watering, irrigation and HVAC applications among others. Used with PumpBase a complete fluid transport system with an optimal pump selection can be designed.

    By Tahoe Design Software based in Nevada City, CALIFORNIA (USA).

  • Constant pressure pump control for variable demand irrigation

    Mist, Drip, Spray, or Big Guns, the Cycle Stop Valve (CSV) turns any Submersible, Turbine, or Centrifugal pump into a variable flow, constant pressure system. The CSV maintains a constant pressure on the irrigation system throughout a wide range of flow. Eliminating line breaks and leaks, while precisely applying an exact amount of water, the CSV can conserve water as well as energy.

    By Cycle Stop Valves, Inc. based in Lubbock, TEXAS (USA).

  • Water Data Management Solution for Irrigation Sector

    Monitor and report the flow in your irrigation system. As a manager of an irrigation district, farmer, or city operations manager, a KISTERS solution provides an effective tool for easily managing, analyzing and reporting on irrigation activities. Even use it to calculate pump efficiencies, leak detection, water balances and monitor water supply contracts!

    By KISTERS AG based in Aachen, GERMANY.

  • MixRite AG and Irrigation Water Driven Injectors

    MixRite Water Driven Injectors are water powered proportioning pumps that require no electricity and deliver accurate dispensing across varying water pressure and water flow and are ideally suited for in-line injection. MixRites are available in a number of models with injection rates from 0.1% to 10%, different sizes for water flow from .08 gpm (3L per min.) to 110 gpm (415L per min.), and various materials to withstand a multitude of aggressive acids, alkalines and solvents. MixRites have numerous in-line applications including sanitizing, cleaning and lubricating processing equipment, in-line application of vehicle wash chemicals, in-line addition of fertilizer, insecticides and pesticides for agriculture and irrigation, dosing of livestock vitamins into the water supply and in-line addition of machine tool coolants and water based lubricants for metal processing plus many more.

    By DEMA Engineering Company based in Saint Louis, MISSOURI (USA).

  • Water filtration systems for sub-surface drip irrigation

    It is an irrigation system that uses a main network to distribute the filtered and pressurized water to the emitting pipes under the surface of the terrain and together the crop line. The emitters in line supply a unique flow rate by each emitting point that is among the interval of 0,6-8l/h. The volume of water supplied under the surface of the soil (nearest the plants) generates a spatial distribution of the same named “dump bulb”. The shape and size of this “dump bulb” is different from the surface localized irrigation.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Constant Pressure Pump Control

    For use with water well pumps and booster pumps, the Cycle Stop Valve (CSV) turns any pump into a variable flow, constant pressure system. Working in conjunction with a small pressure tank, the CSV is usually adjusted to the middle of the pressure switch range. IE; 40/60 PSI switch, 50 PSI CSV. The size of the pressure tank determines how much water can be used by the system before the pressure drops to 40 PSI, and the pressure switch starts the pump. As long as flow rates demanded is not more than the pump can provide, the CSV maintains a constant 50 PSI on the system. When there is no more flow required for the house, the CSV allows the little pressure tank to fill at a reduced rate to 60 PSI, and the pump is shut off by the pressure switch.

    By Cycle Stop Valves, Inc. based in Lubbock, TEXAS (USA).

  • Teraflo Liquid polymer water saving technology. Save Water

    TeraFlo® significantly reduces watering requirements per cycle of irrigation while maintaining adequate moisture for good plant health and growth. Due to its filtration properties, excessive moisture also flows through the soil thereby preventing environments for fungal growth. It draws moisture from the air and the surface and attaches itself to the plant roots from sources not previously available. It provides proper wetting and drainage in non-soil media as well as eliminating unusable water. TeraFlo® dramatically improves the ability of rainfall and water to easily penetrate the soil surface and gain access to the root zone. By encapsulating the soil particles, it significantly decreases friction allowing for easy and rapid water penetration and filtration into any soil condition; hardpan, compacted or otherwise. It improves the efficiency of all applied additives (pesticides, insecticides nutrients, etc) preventing rapid leaching of these products. This increases their effectiveness and reduces over all application quantities making additive usage far more cost effective. Holding organophosphates in the soil reduces the leaching of these toxins which significantly improves their performance. The product has a special affinity to nitrogen thereby reducing nitrate leaching protecting against groundwater contamination. TeraFlo® prevents the buildup of soluble sodium salts contained in fertilizers and water sources thereby reducing stress conditions. Continual use will keep the root zone free of sodium salts. TeraFlo® increases microbial activity which aids in root cell buildup resulting in faster uptake of nutrients. TeraFlo® reduces soil erosion from in-furrow irrigation and significantly reduces nitrogen loss in head ditch irrigation systems. TeraFlo® improves drip applied fumigant systems allowing for a more efficient and longer release system. Teraflo provides lubrication to pump parts, valves, and other parts of pressurized water systems preventing products in the irrigation piping from sticking to the walls, thus reducing drip and irrigation head clogging. This reduces downtime, repair costs, and maintenance.

    By Terawet Green Technologies, Inc. (TGT) based in San Diego, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you