Correct use method of feed pellet machine
Cattle and sheep straw feed pellet machine is a machine for making pellet feed. In recent years, it has been widely used in the production of feed for pigs, cattle, sheep, and fish. Many friends also said that the use of the feed pellet machine is very simple and does not require any professional skills. However, many times looking at simple things, it is not simple. The operation of the cattle and sheep straw feed pellet machine is to feed from the feed port, and then the pellet machine operates, and the pellets come out from the discharge port. This is indeed the case, but there are a few small points to be noted during use.
1. The material needs to be crushed below 6mm.
Material crushing is an indispensable operation before chicken pellet feed are pelletized. Only the materials crushed by the feed mill can be compressed by the pellet machine. Everyone knows this. But everyone will be more confused as to what it is smashing into. In general, the crushing size of the material is related to the diameter of the pressed particles. What diameter particles do you want to suppress, then the crushed particle size is often the same number. For example, if your material is compressed to 5mm, then the material needs to be crushed below 5mm. But often in the process of use, it is not so strict. The feed pellet machine manufacturer recommends that everyone crush the material below 6mm, which is suitable for all feed suppression.
2. The moisture needs to be kept at about 13%.
Many people didn't know this before using the cattle and small poultry feed mill machinery. Many people think that as long as the material is crushed, it can be compressed with a pellet machine. This is not the case. The pellet feed machine is dry in and out, which means that the pellet machine has strict requirements for moisture. The feed pellet machine manufacturer recommends that you keep the material moisture at about 13%. This moisture is very low, so it is often required that the material be dried if it is relatively wet before being pressed.
3. The material needs to be fed at a constant speed.
This point, many people did not pay attention. Whether the feed pellet machine feeds at a uniform speed is related to whether the pellet machine works normally and whether the pellet press is performed normally. If the material is loaded quickly, the machine will become stuffy. If the feeding is slow, it is easy to cause the pellet machine to run empty. Therefore, maintaining a uniform feeding speed can ensure the normal operation of the machine, and can improve the working efficiency of the pellet machine. If you feel that manual feeding is troublesome, you can use a screw feeder instead of manual feeding.
After reading the above points about the correct operation method of the feed pellet machine, do you feel that you have also operated the feed pellet machine incorrectly? Some customers feel that the pellets they make are not smooth enough after purchasing the pellet machine. The grains are not fast enough, there is powder, etc. These are often related to the above three points. In the process of using the poultry feed making machine, refine the operation and achieve the above three points, I believe you are also a professional in the pellet machine industry!
Customer comments
No comments were found for Correct use method of feed pellet machine. Be the first to comment!