Optimisation of sugar cane activated carbon for arsenic(V) and arsenic(III) removal from water
This paper addresses the development of low-cost adsorbents for removal of arsenic from water in support of mitigation programmes in low and middle income countries. Activated carbon (AC) is a well established water treatment technology, but has high cost and low selectivity in respect of arsenic. AC made from agricultural by-products is a low-cost alternative to coal-based AC. In this study, the preparation parameters of sugar-cane activated carbon (SCAC) were optimised for arsenic(V) and arsenic(III) adsorption. The effect of preparation parameters on arsenic removal was investigated with a 23 factorial experiment. SCAC was characterised by the pH of zero charge, surface area, pore width distribution, particle size distribution and imaging under scanning electron microscopy. Activation temperature (AT) has a profound effect on arsenic adsorption; arsenic(V) adsorption increased from 2.8% at an AT of 873 K to 87.6% at an AT of 1,173 K. The percentage of arsenic removal from water has a strong positive correlation with surface area, and a strong negative correlation with micropore/pore volume ratio and the percentage in volume of particles with a size of 60–2,000 μm. In conclusion, this research shows that low-cost AC can be manufactured for removal of target pollutants, such as arsenic, from water.
Customer comments
No comments were found for Optimisation of sugar cane activated carbon for arsenic(V) and arsenic(III) removal from water. Be the first to comment!