A & B Eagleline Equipment, Inc.

12 products found

Products

  • Plows

  • 2 Bottom Plow

    2 Bottom Plow

    Welded Cross Shaft Frame Support. 3 Point Hitch With Replaceable Cat. 1 Lift Arm Pins. Replaceable Shins, Shares And Moldboards. Shear Bolt Protection. Grade 5 Heat Treated And Plated Fasteners. Adjustable Width Of Cut ( Hill Side). Comes Assembled, Install A-Frame And Ready To Use. 25-40 Hp Recommended. Coulter Or Gauge Wheel With Ball Bearings Optional.

  • 1 Bottom Plow

    1 Bottom Plow

    3 point hitch with replaceable cat. 1 lift arm pins . Replaceable shins, shares, and moldboards. Shear bolt protection. Grade 5 heat treated and plated fasteners. Adjustable width of cut ( hill side). Comes assembled, install a- frame and ready to use. 15-30 hp recommended. Coulter or gauge wheel with ball bearings optional

  • Model 1BP12CT        - 1 Bottom Compact Tractor Plow

    Model 1BP12CT - 1 Bottom Compact Tractor Plow

    Available with 12″ bottom. 3 point hitch with replaceable cat.1 lift arm pins. Replaceable shins, shares and moldboards. Shear bolt protection.Grade 5 heat treated and plated fasterners. Adjustable width of cut (hill side). Comes assembled, install a-frame and ready to use. 15-25 hp recommended. Gauge wheel with ball bearings optional

  • Model 3BP14 and 3BP16 - Three Bottom Plow

    Model 3BP14 and 3BP16 - Three Bottom Plow

    2″ square tube rear strut. Welded cross shaft frame support. 3 point hitch with replaceable cat. 1 lift arm pins. Replaceable shins, shares and moldboards. Shear bolt protection. Grade 5 heat treated and plated frasteners. Adjustable width of cut (hill side). Comes assembled, install a-frame and ready to use. 35-50 hp recommended. Coulter or gauge wheel with ball bearings optional

  • Trailers

  • Model 7862 - Trailer

    Model 7862 - Trailer

    New Hustler 6′ x 10′ Utility trailer with ramp gate. 1 – 3500 lb. EZ lube axle. 15 inch new tires & wheels. Spare tire mount. L.E.D. Rubber mounted marker & tail lights. Treated wood floor. Swivel mount jack. 2 ramp gate pivot springs.  ( Make lifting the ramp gate  easier ).

  • Model 7962 - Trailer

    Model 7962 - Trailer

    New Hustler 6′ x 10′ Utility Trailer with ramp gate. 1 – 3500 lb. EZ lube axle. 15 inch new tires & wheels. Rubber mounted marker & tail lights. Treated wood floor. Swivel mount jack.

  • Model 7961 - Trailer

    Model 7961 - Trailer

    New Hustler 6′ x 10′ Utility trailer with ramp gate. 1 – 3500 lb. EZ lube axle with 15 inch new tires and wheels. Rubber mounted marker & tail lights. Treated wood floor. Swivel mount jack.

  • Model 2154 - Trailer

    Model 2154 - Trailer

    New 2014 C & W 6 1/2′ x 18′ Utility Trailer with Ramps. 2 – 3500 lb. EZ Lube electric brake axles. 15 inch new tires and wheels. Breakaway kit. Treated wood floor. Slide – in ramps.

  • Bale Spears

  • Model PF 500, 700 and 900 - Pallet Fork- Quick Hitch

    Model PF 500, 700 and 900 - Pallet Fork- Quick Hitch

    Frames are made of heavy wall high strength steel tubing. Side plates are made of thick steel. Pallet forks have a 3000lb. Capacity. Useable length of the forks is 48″. Forks slide and lock on 3″ increments. Includes a welded safety guard with anti-skid step plate in the middle on top of the implement. Weighs 404 #

  • Model RHF15 and 30 - Rear Bale Forks

    Model RHF15 and 30 - Rear Bale Forks

    Frames are made from heavy wall high strength tubing. Stabilizer spikes are pointed for easier penetration. Fits cat. 1 and cat. 2  tractors. Rhf 15-1500lb. Capacity. Rhf 30-3000lb. Capacity

  • HIJACKER - Rear Bale Spear

    HIJACKER - Rear Bale Spear

    Made From Heavy Wall High Strength Tubing. Increases Tractor Lift More Than 3 Feet. Needs Top Link Or Hydraulic Cylinder Installed For Proper Operation. Handles Up To 1500lb. Bales.

  • Misc Equipment

  • Model SSO03 - Subsoiler

    Model SSO03 - Subsoiler

    Able to dig up to 16 inches deep. Weight 138 lbs. 20 – 35 Horsepower Advised. 3/8 x 3 Grade 5 Shearbolt protection.