10 products found
Ace Pump Corporation Products
-
Hydraulic Driven Centrifugal Pumps
-
Model FMC-75-HYD-204 - Centrifugal Pump
The 204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid input. Recommended for: Pressure Compensating Closed Center Systems, open Center Systems up to 13 GPM (49.2 LPM) using internal needle valve ...
-
Model FMC-HYD-202 FMC-HYD-203 - Polypropylene Hydraulic Motor Driven Centrifugal Pump
The farm industry standard since 1969. The 202 and 203 motors require 2 GPM (7.6 LPM) and 3 GPM (11.4 LPM) hydraulic fluid input. Recommended for engineered systems with limited oil flow. The 204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid ...
-
Model FMC-150-HYD-206 - Centrifugal Pump
The 204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid input. Recommended for: Pressure Compensating Closed Center Systems Open Center Systems up to 13 GPM (49.2 LPM) using internal needle valve bypass. The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems. Recommended for: Pressure Compensating Closed Center Systems Load Sensing Closed Center Systems Open Center Systems up to 16 GPM ...
-
Model FMC-150FS-HYD-206 - Centrifugal Pumps
FS model constructed of 316 stainless steel with NPT ports and industry standard flanged connections Provides higher pressure and greater volume for applications with large tanks and longer spray booms. The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems. Recommended for: Pressure Compensating Closed Center SystemsLoad Sensing Closed Center Systems Open Center Systems up to 16 GPM (60.6 ...
-
PTO Belt Driven Centrifugal Pumps
-
Model PTOC-600,PTOC-1000 - PTO Belt Driven Centrifugal Pump - Broucher
The original belt drive standard since 1964. Time tested and field proven design. Widespread parts and service availability. Most Economical belt ...
-
Model PTOC-150-600 PTOC-150-1000 - PTO Belt Driven Centrifugal Pump
The High Performance Pump. 100 PSI (6.9 BAR) at 40 GPM (151 LPM) due to increased pulley ratio and larger 1-1/2” x 1-1/4” ...
-
Belt Driven Centrifugal Pumps
-
Model FMC-CW-200-X - Belt Driven Centrifugal Pump
3/4” (1.91cm) Diameter stainless steel shaft (standard models 5/8” diameter) (1.59 cm). Larger bearings for extended life. Available with MAG-D clutch. 5-1/4” (13.34 cm) mounting bolt spacing. X3 frame has 3” (7.62 cm) bolt ...
-
Model FMC-150 FMC-150SP - Belt Driven Centrifugal Pump
Counterclockwise Rotation when facing shaft end. Stainless Steel Shaft and Wear Ring. Chemical resistant Valox® or optional cast iron impeller.Standard Viton® Carbon/Ceramic seal or optional Severe Duty Silicon Carbide Mechanical seal. SP model is self-priming, making it perfect for load and spray applications. MAG-D models equipped with heavy 12V ...
-
Gasoline Engine Driven Centrifugal Pumps
-
Model GE-75 - Gasoline Engine Driven Centrifugal Pump
Tall Blade Impeller design - higher pressure at standard engine speeds. Impeller attaches directly to 5/8” (1.59 cm) keyed shaft engine. All Polypropylene corrosion resistant construction. Available complete or less ...
-
Electric Motor Driven Centrifugal Pumps
-
Model ACH-55 - Electric Motor Driven Centrifugal Pump
For most industrial and agricultural blending, mixing, seed treating and liquid transfer applications. Easily replaceable Viton mechanical seal. Non-overloading 3/4 HP (0.56 KW) 3450 RPM single phase totally enclosed fan cooled electric motor, for use in all dusty, dirty or weather exposed locations. Optional silicone carbide seal available for abrasive solutions. Chemical resistant Valox or optional cast iron ...