12 products found

Products by SeaMetrics, Inc.

  • Irrigation Flow Monitoring

  • Model AG2000 - Spool Type Electromagnetic Irrigation Flowmeter

    Model AG2000 - Spool Type Electromagnetic Irrigation Flowmeter

    The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 3' to 12' pipe. With no moving parts, these meters provide unobstructed flow and are resistant to wear from debris found in ground or surface water. Little maintenance is required because there are no bearings to wear out or propellers to stop turning. Minimal straight pipe requirements allow AG2000 meters to be used in piping configurations where there is...

  • Model TX110/210 Series - Insertion Turbine Irrigation Flow Sensor

    Model TX110/210 Series - Insertion Turbine Irrigation Flow Sensor

    The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3' to 40' pipe. Adapters mate with standard 1-1/2' (110/210) or 2' (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these adjustable insertion turbine flow sensors a wide flow range and long life. A sensor detects the passage of...

  • Model TX800-Serie - Insertion Turbine Irrigation Flow Sensor

    Model TX800-Serie - Insertion Turbine Irrigation Flow Sensor

    The TX800-Series are insertion turbine meters designed for use in 1-1/2' to 8' pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC. sensor bodies are machined from solid rod for maximum low-flow performance.TheTX800-Series use special fittings thatensure ease of installation and correct depth setting in the pipe. The rotation of the turbine is detected by a non-drag...

Products by Hendrickson Bros.

  • Vacuum Breakers

  • Hendrickson - Model J10 - Hose Vacuum Breaker

    Hendrickson - Model J10 - Hose Vacuum Breaker

    The J10 Hose Bibb Vacuum Breaker prevents backsiphonage through the exterior hose bibb connection. Back-siphonage can occur whenever a negative line pressure (vacuum or partial vacuum) is present that causes the reversal of the normal line flow. The use of the J-10 Hose Bibb Vacuum Breaker greatly reduces the possibility of backsiphonage and protects the potable water supply from contaminants that may be present in the hose line or irrigation...

  • Flow Controls

  • Hendrickson - Model FLD500 - Flow Limiting Devices

    Hendrickson - Model FLD500 - Flow Limiting Devices

    The FLD500 Break Away Flow Limiting Device is designed with an internal flow control to substantially reduce the amount of water loss in the event of a sprinkler riser breakage. The irrigation system remains operational and balanced even in the event of multiple breaks in the system. The FLD500 can be easily removed and replaced quickly to minimize system down time, water loss and maintenance costs. The weak point engineered into the FLD500 will...

Products by Universal Irrigation Sales Corporation

  • Model 4-1-15 - Irrigation Hose Reels

    Model 4-1-15 - Irrigation Hose Reels

    Universal Sales is excited to introduce Irriland to the Pacific Northwest. Irriland offers a full range of sizes and options, with standard features that stand out from the competition: Fully hot galvanized drum and frame on all models. High efficiency turbine and oil filled gear box with pinion gear that drives a crown gear on all models. PTO shaft and hand wheel included on all models. Automatic brake on the gear box on all models. Automatic cart...

  • Model T1.3/328 - Irrigation Hose Reels

    Model T1.3/328 - Irrigation Hose Reels

    Fully hot dipped galvanized drum and frame. Driven by high efficiency partial flow turbine and oil filled gear box with pinion gear that drives the hot dipped galvanized crown gear. Easy speed adjustment with ball valve on turbine bypass. Automatic brake on the gear box during pull out. Hose guide system with steel level wind bar. Automatic shut down valve at end of run. PTO shaft on gear box and hand wheel included. Hot dipped galvanized sprinkler...

  • Model T1.6/426 - Irrigation Hose Reels

    Model T1.6/426 - Irrigation Hose Reels

    Fully hot dipped galvanized drum and frame. Driven by high efficiency partial flow turbine and oil filled gear box with pinion gear that drives the hot dipped galvanized crown gear. Easy speed adjustment with ball valve on turbine bypass. Automatic brake on the gear box during pull out. Hose guide system with steel level wind bar. Automatic shut down valve at end of run. PTO shaft on gear box and hand wheel included. Hot dipped galvanized sprinkler...

Products by Naco Industries

  • Naco - Bolted Repair Couplers

    Naco - Bolted Repair Couplers

    At NACO we have improved upon our Bolted Compression (Repair) Couplers by introducing Injection Molded Fiberglass Reinforced PVC Flange Rings.By adding our injection molded fiberglass reinforced PVC flange rings to our existing PVC body, you have a superior product that will not pit, rust, or scale which is so common to metal compression couplers. For a totally non-corrosive unit, add our Stainless Steel bolt pack. Each unit is pre-assembled and...

Products by DEMA Engineering Company

  • MixRite AG and Irrigation Water Driven Injectors

  • DEMA - Model TF 25 Series - High Flow Fertigation

    DEMA - Model TF 25 Series - High Flow Fertigation

    The TF 25 Series are designed for high water flow for fertigation, pesticide and other in-line additives. They are intended for typical fertilizers, pesticides and agriculture or irrigation additives. They are not designed for strong acids, alkalines or solvents. The TF 25 is designed for water flow up to 110 gpm (25 m³/hr.) and operates from 4.4 – 110 gpm (16 – 416L / min.). The TF 25 has 2” NPT threaded connection for in-line...

  • Venturi Injectors

  • DEM - Model C Series - Venturi Injectors

    DEM - Model C Series - Venturi Injectors

    The “C” series injectors are supplied with 3 water nozzle bushings for accurate sizing of injector to water flow. They are equipped with a metering screw or use metering tips to adjust the dilution of the product. C Series injectors have a Ryton metering knob and check valve core for high chemical resistance and operate in pressure as high as 700 PSI (48 Bar) with water at room temperature or 500 PSI (34 Bar) with water at 150 degrees F...

  • On-Premise and Commercial Laundry

  • DEMA - Model 8410 - V-Line Laundry System

    DEMA - Model 8410 - V-Line Laundry System

    V-Line Is the perfect on-premise laundry system for smaller facilities where value and flexibility are critical but performance must be second to none. V-Line features a modular design to accommodate from 1 to 6 pumps and uses the proven performance of DEMA’s standard Quick Change Pump at 16 ounces (475 ml) per minute or the Large Blue QC Pump for 50 ounzes (1500 ml) per minute.