87 products found

Products by ERME s.a.s

• Planters

• 

  PLMS - Single-Row Mechanical Planter

  The machine is carried and can have from a 3 to 15 elements beam and 2 drive wheels. Each element is attached to the beam by a paralellogram system. It is made of: a chassis, a share, a plate with 16 bulblets holders, a hopper, two depth setting wheels and an agitator. The plates are synchronised with the drive wheels, and each spoon closes as it passes through the hopper and opens as it passes over the furrow. An agitator facilitates the flow of...

• 

  PLMD - Double-Row Mechanical Planter

  The machine is carried and can have from a 3 to 10 elements beam, a single hopper and 2 drive wheels. Each element is attached to the beam. It is made of a chassis, a share, two plates with 32 bulblets holders, two depth setting wheels and an agitator. The plates are synchronised with the drive wheels, and each holder closes as it passes through the hopper and opens as it passes over the furrow.An agitator facilitates the flow of garlic bulblets in...

• 

  PLPS - Simple-Row Pneumatical Planter

  The machine is carried and can have from a 3 to 6 element beam, a single hopper, 2 drive wheels and a turbine. Each element is attached to the beam. It is made of: a chassis, a share, a suction disc, a distribution wheel, two depth setting wheels and an agitator. The bulblets are taken from the bottom of the hopper by the suction disc and are then sent to the distribution wheel which deposits the bulblets in the furrow. The plates are synchronised...

• 

  PLPD - Double-Row Pneumatical Planter

  The machine is carried and can have from a 3 to 5 element beam, a single hopper, 2 drive wheels and a turbine. Each element is attached to the beam. It is made of: a chassis, a share, two suction discs, two distribution wheels, two depth setting wheels and an agitator. The bulblets are taken from the bottom of the hopper by the suction discs and are then sent to the distribution wheels which deposit the bulblets in the furrow. The plates are...

• Harvesters

• 

  Model RL1 - One Row Harvester Binder

  Lifting is done by a blade which passes under the garlic bulbs and by two belts which pull up the garlic by the leaves. The garlic is carried by the belts, passing through a vibrator, to an automatic bundle binding system. The bundles of garlic are then removed by a conveyor belt. The machine is operated by one person. Lateral movement is ensured hydraulically. The machine has setting systems allowing it to be adapted to various types of planting....

• 

  Model RL2 - 2 Row Harvester Binder

  Double-chassis, towed machine. Lifting is carried out by a blade which passes under the garlic bulbs and by two belts which pull up the garlic by the leaves. The garlic is carried to an automatic bundle binding system.The bundles of garlic are then removed by a conveyor belt. The machine is operated by two people. Lateral guidance is independent, and the commands are hydraulic.The machine has setting systems allowing it to be adapted to various types...

• 

  Model RE1 - One Row Harvester Topper

  Machine carried by a 3-point linkage. It is hydraulically powered by a pump which is driven by the tractor's power take-off. The lifting system is situated beside the tractor. The bulb is lifted by a blade and the leaves are grabbed between two belts. The garlic is carried to the topping system after passing through a vibrator, a second set of belts levels off the bulbs and two discs cut the leaves. A conveyor belt carries the bulbs to a container or...

• 

  Model RE3/4/5 - Multi Row Harvester Topper

  Double chassis, towed machine. It is hydraulically powered by pumps which are driven by the tractor's power take-off.The lifting system is identical and independent for each row. The bulb is lifted by a blade and the leaves are grabbed between two belts. The garlic is carried to the topping system after passing through a vibrator. A second set of belts levels off all the bulbs and two disks cut the leaves. A conveyor belt carries the bulbs to one side...

• Garlic Splitter

• 

  Model E150 - Small Garlic Splitter

  A hopper with a slatted conveyor belt feeds the machine. The garlic bulbs are split into bulblets between two belts, the distance between the belts can be adjusted.A suction extractor removes the skins after splitting. There is a belt enabling manual finishing. 6 rubber fingers complete the splitting operation. A suction extractor remove the skins after splitting. There is a belt enabling manual finishing.

• 

  Model E600 - Big Garlic Splitter

  A hopper with a slatted conveyor belt feeds the machine. The garlic bulbs are split into bulblets between two belts, the distance between the belts can be adjusted. 7 alternating rotary brushes complete the splitting operation. A suction extractor removes the skins after splitting. There is a belt enabling manual finishing.

• Garlic Grader

• 

  Model C630 - Garlic Grader

  Motor power rating: 0.25 kW. Voltage : 220/380 V three-phased. Production : 500 kg/h.

• Garlic Cleaner

• 

  Model NC500 - Garlic Cleaner-Grader

  Motor power rating: 0.25 kw. Voltage : 220/380v trifásica. Production : 400kg/h

Products by Ferrari Costruzioni Meccaniche S.r.l.

• Tray Planter

• 

  Ferrari - Model FX - Trans Planter

  The FERRARI FX transplanter is a machine equipped with a rotary carousel suitable for planting vegetables in cylindrical, conical and pyramidal plugs. One of the most interesting features of this transplanter is the minimum row distance achievable: 25 cm (9.8') which allows the user to plant high density vegetables like lettuce and radicchio, broccoli, celery, fennel, onions and many others. 

• 

  Ferrari - Model F-MAX - Trans Planter

  The FERRARI F-MAX transplanter is suitable for planting a wide variety of vegetables from tomatoes to cabbages, peppers, celery, tobacco and many others. This transplanter can be fed with many different types of plugs: pyramidal, cylindrical, conic and also with square blocks.

• 

  MULTIPLA - Trans Planter

  The FERRARI MULTIPLA transplanter is a machine equipped with a double rotary carousel (1 person = 2 lines) suitable for planting vegetables in cylindrical, conical and pyramidal plugs. This machine is suitable for a large variety of vegetables: tomato, cabbage, celery, lettuce and onions are the most common. 

• 

  MULTIPLA - Model FX - Trans Planter

  The FX-MULTIPLA transplanter is a machine equipped with a double rotary carousel (1 person = 2 lines) suitable for planting vegetables in cylindrical, conical and pyramidal plugs. One of the most interesting features of this transplanter is the minimum row distance achievable: 23 cm (9') which allows the user to plant high density vegetables like lettuce and radicchio, broccoli, celery, fennel, onions and many others. 

• 

  Futura - Automatic Transplanter

  The automatic transplanter mod FERRARI FUTURA has been studied to transplant vegetables stored in trays of different sizes.  The machine needs just one operator to feed the transplanter robots with trays.

• 

  Futura - Twin Automatic Transplanter

  The automatic transplanter mod FERRARI FUTURA TWIN has been studied to transplant vegetables stored in trays of different sizes. The machine needs just one operator to feed the transplanter robots with trays.

• Potato Planter

• 

  FERRARI - Model FPM - Potato Planter

  The FERRARI potato planter mod FPM  is a very simple and fuctional machine, each element is equipped with a large turning carousel that allows the tubers to drop down into the furrow. The Semi-automatic potato planter is driven by the driving wheel of the element. The earthing-up of the tubers is made either by discs with adjustable angle or by ridgers with adjustable wings. FPM potato planter has been designed for planting either potatoes or...

• Block Planter

• 

  ROTOSTRAPP - Trans Planter

  The highest yield combined with top transplanting quality: this is the most common comment you will hear from farmers who  work with ROTOSTRAPP. This FERRARI transplanter, has been studied for square-blocks (cubic shape sod), it's a modular machine and it's available in two versions: pulled and self-propelled.

• 

  Ferrari - Model F - Transplanter

  The F Ferrari precision transplanter was designed to transplant lettuce and other vegetables in square blocks from 2.5 to 5 cm. This completely mechanical transplanter is extremely simple and easy to use.  FERRARI F is very precise, every single unit is independent from the others and all the plant are left in the ground on a diamond pattern to guarantee a proper growing area to every single plant. F transplanter is equipped with a very...

• Film Planter

• 

  Ferrari - Model FP - Film Layer

  The FERRARI FP film layer lays in a perfect way the plastic mulch on the ground (either polyethylene, biodegradable or cellulose). and at the same time covers the film on the sides by means of ploughshares that are adjustable in height and in width. The most important feature of the FERRARI FP film layer is the capacity of keeping the film constantly in tension thanks to the use of a front roller the turn together with the film. The film is stored in...

• 

  Model FPC - Layer and Transplanter

  The FERRARI FPC transplanting machine was developed to accomplish simultaneous operations in one pass. This transplanter can lay either polyethylene or biodegradable film to the ground, make holes through the mulch and transplant square block pots. The output is on average 5,000 plants per hour on every row. FPC can be either tractor pulled or self-propelled. Different frames are available according to the size of the film roll and the number of rows...

Products by Kress Umweltschonende Landtechnik GmbH (K.U.L.T.)

• 

  Kress - Finger Weeder

  For mechanical weed control in the row, Kress developed the Finger Weeder. The Finger Weeder is constructed around a rotating disc with polyurethane fingers. The fingers are driven by a cast iron sprocket that drives through the soil. The flexible fingers move in between the plants in the row and make the young weeds loose so they dry out. The machine is successfully applied in leeks, maize, sunflowers, sugar beet and iceberg lettuce. For row...

• 

  Kress - Drag Harrow

  Drag harrows can be used for weed control in crops such as potatoes and cereals, or for seed bed preparation. The frame width can vary between 1.4 to 12.8 metres. The bigger frames can be folded back to 3 metres for road transport, either hydraulically or manually. The tines come in different shapes and thicknesses.

• Mechanical Hoes

• 

  Finger Weeder

  Rubber fingers grip from the side around the plant and there they hoe the weeds. In this way, the area which no other mechanical hoe usually reaches will be weeded as well.

• 

  Triple-Hoe

  The KRESS-Triplehoe is designed for accurate weeding even at large working widths. This is realized by the optoelectronic system called Autopilot from KRESS.The plant row is seen by a camera and the collected data are analyzed in a computer, which controls directly the hydraulic stearing. Because every bed is controled seperately, the common bed preparation and planting systems can be used without any modification. The outcome of this is high...

• 

  Cage Weeder

  With this machine KRESS & CO has given a total new idea to mechanical weed control. The absolutely new principle of effect and construction received the award for new inventions on the Agritechnica '95.This new method of weed control and soil loosening works particularly very effective in early stadiums. The machine is used in all row-crops.

• 

  Star - Cultivator

  The KRESS-Star-Cultivator is an important machine in the KRESS & Co weeding series. The range of use is enormous – from preparing ridges over inter-row weed control with protection shields up to soil accumulation in potatoes, carrots etc. With the exchangeable stars the working width starts at 60 cm from row to row. Thus, the KRESS Star Cultivator can be used for all cultivation in ridges. A REAL MULTIFUNCTIONAL TOOL.

• 

  Tool Carriers and Horse Pulling Teleskopic Hoe

  Weeding is the most important work for vegetable growers. Breaking the crust is, beside hoeing of weeds and guaranteeing of a good water balance inside the soil, of great importance. Beside the hoeing, it is very important to crumble hard soil in order to provide good water balance in the soil.  The very compact construction of the Teleskopic Hoe is ideal to combinate with the KRESS-Fingerweeder, especially with the tool carrier or in front.

• 

  Habicht System

  When designing the Habicht-System, there was focuse on multifunctional use and intransigent stability, especially for large working widths over 3 m to work in the front or at rear. With the adjustable support weels, an accurate guidance of depth of the spring mounted tools is always guaranteed.

• 

  Argus System

  Most versatile combination options, precise working close to the culture row, strength and time-saving adjustement of framework position and tools in connection with comfortable controllability and handling of the machine, that is our ARGUS precision technology for farmers with high requirements to their weed management.

• 

  Ridge Cultivator

  We have the solution: the KRESS-Ridge Cultivation System comes with hilling discs (adaptable to the ridge) and furrow shares.the furrow-shares cut the weeds in the furrow and along the ridge, the discs afterwards pushes the soil upwards. By using our adapter pieces, the Ridge-Cultivation-System can be mounted to the Argus- or Habichtsystem. 

• 

  Autopilot - Guidance System

  This new technology is based on a camera coupled to a computer. The computer controls a hydraulic cylinder, which acts on the steering wheels of the cultivator. This system can perform a precise steering of row crop cultivators thus improving weeding efficiency. The hoeing can be done closer to the plants than would otherwise be possible with manual steering. The operation is easy and comfortable. There are no risks of human...

• Harrow Technology

• 

  Flexible Tine Harrow

  Because harrowing is not always harrowing, KRESS & CO remembers the forerunner of all harrows - the Flexible Tine Harrow, which is manufactured equal to the „System Schöneberger“ ,with working widths from 1,5 – 12 m. The critical factor to receive a good working success is the right way of „blind- or black-harrowing“, that removes and spills the weeds easily. For this work the KRESS-Flexible Tine Harrow is still...

• Flame Weeding

• 

  Weed Control System

  Pre-emergent weed-control is the most effective way to manage weeds in vegetable crops, especially in organic farming. The method is well suited to slow-germinating, direct-seeded cultures. Carrots, for example, gain the necessary advance in growth when flame-weeded already before emerging.

Products by Rinieri S.r.l.

• Offset Machinery - Velox

• 

  Velox - Blade Tool

  In and out group + hoeing up blade tool linked to a simple 3 point linkage (Velox 1) or telescopic frame (Velox 2) suitable for a speedy and ecological weeding in orchards and vineyards, even when stumps are very close one another (50 cms. minimum). Optional: Velox front mount frames, for tractors with front hydraulic hitch, available.

• Rinieri - Offset Machinery - Hoeing Plough

• 

  Rinieri - Model AI 15 - Hydraulic Hoeing Plough

  Hydraulic hoeing plough linked to a fixed mount 3 point linkage complete with indipendent hydraulic distributor for the hoeing of vineyards. It is possible to mount one or two front furrows in order to increase the working width and furrows for row ridging.

• 

  Rinieri - Model AD 12 - Hydraulic Hoeing Plough

  Hydraulic hoeing plough linked to a fixed mount 3 point linkage complete with indipendent hydraulic distributor for the hoeing of vineyards. It is ideal for narrow rows (cm. 120 -150) and for tractors with overall cm. 110 max.

• Offset Machinery - Offset Tillers

• 

  Rinieri - Model FS - Rotary Tillers

  The FS series rotary tillers come in 5 versions to satisfy every hoeing requirement on rows. The rotor head is height adjustable in all the models and is  equipped with a spring damper which cushions violent shocks. The rotor also features a special safety coupling in the transmission. All models available  with hydraulic height adjustable rotor head.

• Offset Machinery - Cultivator

• 

  Rinieri - Model EL - Hydraulic Offset Cultivators

  The hydraulic offset cultivators with 4 vertical rotary tine sets are ideal for tilling vineyards and orchards in rows with close plantings (at least 50 cm. apart). EL performs a good weeding at a minimun working depth, ensures an optimum soil leveling without creating any ditch during its side displacement.

• 

  Rinieri - Model EL-A - Hydraulic Offset Cultivators

  EL-A hydraulic offset cultivators are new and created to be used with reversibledrive tractor or with front lift. They maintain the same features and efficaciousness of rear mount hydraulic offset cultivator EL, while offering an easier view of the working area. Many models available, with different side shifting lengths and suitable for 1,50 - 6 metres wide rows.

• 

  Rinieri - Model ELX - Combines

  ELX combines reduced overall and sturdiness for big reliability in stony soils. The machine has a three-arm sideshift, anti-shock gas cylinder for dampening and a special PTO shaft with a ratcher-style torque limiter. It is ideal for demanding customer who have to work in difficult conditions, in stony and hard soil. Available patented device RSA.

• Offset Machinery - Inter-Row Cultivator For Stony Ground

• 

  Rinieri - Model ET - Inter-Row Cultivator

  Inter-row cultivator for truffle born from the experience of the truffle growers combined with our 40 years experience in inter-row machines. The truffle growers need to hoeing the ground without mixing too much  up the soil. From this necessity arises the idea of an inter-row machine with pivoting blades (Patented) which will automatically be adjusted following the direction of the machine. The designed machine makes a safety inter-row...

• Trimmers and Pruners- Trimmers for Vineyards

• 

  Model CRV - Trimming Machine

  The series CRV is characterized by innovative cutting bars with stainless steel blades. The use of lightweight aluminum pulleys and toothed belts has allowed to greatly reduce the weight of the bars and to improve the performances. The maximum speed during the work now is more than 15km/h (10mph) without compromising the quality of cut. The bars are provided with independent safety devices and construction is extremely robust and able to resist to all...

• Trimmers and Pruners- Pre-Pruners for Vineyards

• 

  Model CPS and CPL - Double Barrel Winter Trimming Machine

  Double barrel winter trimming machine for cutting the branches in cordon vineyards. Pre-pruner and remover vine canes CPS, suitable for  all varieties of vineyards, essential for cost containment of vineyard management.  To the operator is left only the finishing touch of occasional clearing of the wires as most of the canes are removed from the wires, therefore reducing the pruning time by at least one third. The CPS has electro-hydraulic...

• 

  Model CRS - Pruning Kit

  The pruning kit CRS is used for pre-pruning of the vineyard trellis. The kit consists of one horizontal bar with nylon wheels, gas spring for automatic in and out and hydraulic movement to avoid the posts plus one or two bars optional. These bars work between the wires of the row and cut all the branches. The kit can be applied on every frame B1, B1 SB and turning frame.

• Trimmers and Pruners- Leaf Strippers for Vineyards

• 

  Model DRV - Leaf Remover

  The DRV leaf remover is ideal for removing the leaves in the area of production in traditional vineyards unprepared to the use of double barrel defoliator. In fact, the cutting blade placed in front of the fan ensures a clean cut of the shoots aspirated. The stainless steel shield is made of  a special shape to be in contact with the row without causing damage to the grapes and it is possible to adjust the suction by changing  the...

• 

  Model DRF - Double Barrel Leaves Remover

  The new double barrel leaf remover DRF is the answer to the needs of the modern vineyards. The machine removes the leaves from the grape zone, that increases maturation and aeration reducing spraying chemicals. The machine consists in two opposite rollers, one with holes and the other with rubber, which allow a perfect and safe removal of the leaves without damaging the grapes thanks also to the stainless protection shield steel which follows the...

• Trimmers and Pruners- Side Shoot Remover

• 

  Model SRV - Side Shoot Remover Unit

  The sucker remover unit SRV is used to remove new shoots along the stems of the vines. The axial rotation of the shaft allows the head to be used also to control weeds. This tool can be applied to any frame B1, B1SB, turning frame and B2. The whips available are three: round soft polymer ideal for young vineyards, square yellow / orange hard aggressive with the grass and  large strips very aggressive with the weeds.

• Rinieri - Trimmers and Pruners- Pruners for Orchards

• 

  Model ORP - Trimming Saw Machine

  Trimming saw machine for orchards for cutting of 10 cm of branches and frame with 4 electro-hydraulic displacements. The orchard pruner is suitable in different types of cultivation like cone and mono-cone or high density for machine harvesting. The frame has 4 hydraulic movements acting by a joystick and it can mount 1 or 2 saw discs bars which works with branches up to Ø cm 8-10 (3-4”). The machine with 2 bars cuts the side and the top...

• 

  Rinieri - Model CRF - High Density Spindle Orchard Pruner

  New high density-spindle orchard pruner suitable in all kind of varieties like apples, apricots, cherries, olives until 4m (13’) high of the trees. The single acting sickle bar with “SCH” teeth can work with branches up to Ø 3-4 cm (1,2”-1,6”). To adapt the machine to all kinds of orchards are available a number of accessories like top bars or bottom bars. In particular, in orchards with hail nets the top bar can...

Products by Abimac srl

• Pruning Rake

• 

  BORELLO - Model 8 BC - Pruning Rake

  BORELLO NEW 8, pruning rakes make a 50 to 120 cm. wide swath of pruned branches in the middle of the row. This makes shredding or cleaning easier. A shock-absorber (BORELLO pruning rake patent) makes the operation easier. The elasticity of the spring tines permits to work in any kind of orchard whatever the ground. The gearbox parts are in oil bath therefore no maintenance is needed. NEW 8 B.C. model standard frame with pto shaft for espalier orchards...

• 

  BORELLO - Model 8 BL - Pruning Rake

  BORELLO NEW 8, pruning rakes make a 50 to 120 cm. wide swath of pruned branches in the middle of the row. This makes shredding or cleaning easier. A shock-absorber (BORELLO pruning rake patent) makes the operation easier. The elasticity of the spring tines permits to work in any kind of orchard whatever the ground. The gearbox parts are in oil bath therefore no maintenance is needed. NEW 8 B.L. model long frame with double pto shaft suitable to any...

• 

  Girolivo - Model 320-9 B.L. - Pruning Rake

  The Girolivo rake by BORELLO is a specific tool for olive groves. It permtis to form a swath in the centre of the tree row with the brances cut for pruning and makes cleaning easier, especially if you are using a branch cutter.  Girolivo by BORELLO permits to form a swath in a variable width. The hydraulic side shift obtained with a double-acting cylinder makes entering and leaving the tree rows easier and improves...

• Hay Tedder

• 

  Abimac - Model HT series - Hay Tedder Spreader

  The tedder-spreader HT series offers a truly reliable machine which ensures excellent performances. The choice of a HT tedderspreader ensures succesful and improved harvesting.

• 

  Model HTS 500/6 - HTS 600/7 - HTS 720/6 - HTS 840/7 - Hay Tedder

  The tedder spreader HTS thanks to the hydraulic lock for transport on road and thanks to the automatic device to adjust wheels for working on a slope is ideal for small and medium size farms.

• Rotary Hay Rake

• 

  Borello - Model Series 3.5 - Rotary Rake Single Rotor

  The rotary rakes of the BORELLO series 3.5 are reserved to farmers who wish to make perfect fluffy swaths of dry and wet forage. A maintenance-free oil-bath gearbox garantees an excellent long life. The BORELLO version 3.5 F with fixed frame is a very stable rake, easy to use even on steep hilly or mountain slopes. The BORELLO version 3.5 S with steering frame and tandem axle with oxillating bearings and tandem axle supplies the highest stability...

• 

  Model Butterfly series - Double Rotor Rotary Hay Rake

  The new rake of the Butterfly series combines the well-known advantages offered by the half-carried rake with central swath with a lighter weight and great handiness both at work and during transportation. It is hooked to the three-point linkage of the tractor hitch. Being carried, it demands a tractor able to hoist 1000 kgs. Working width can be adjusted manually on the extractable arms in order to adapt the rake to the cutting bar width.Ideal...

• 

  Borello - Model Butterfly Avantime series - Double Rotor Rotary Hay Rake

  The new rake of the Butterfly series combines the well-known advantages offered by the half-carried rake with central swath with a lighter weight and great handiness both at work and during transportation. It is hooked to the front lift three-point linkage of the tractor hitch. Being carried, it demands a tractor able to hoist 1500 kgs. Working width can be adjusted manually on the extractable arms in order to adapt the rake to the cutting bar...

Products by Capello Srl

• Other Products

• 

  Capello - Model Quasar Series - Corn Head with chopper

  The corn head series QUASAR is the result of a precisely calculated  engineering project which was improved and brought to perfection during the years. The trouble free Quasar corn head with its low maintenance engineering has done a perfect job on innumerable hectares around the globe. All this and the high productivity make the QUASAR a very popular model amongst contractors worldwide.

• 

  Capello HELIANTHUS - Sunflower Attachment

  The Helianthus front attachment for sunflower harvesting adopts a row-independent harvesting system. This means that its overall dimensions determine the harvesting width without having to worry about row spacing, which can range from 40cm to 75cm. The reel features hydraulic height adjustment done from within the combine harvester’s cab so that you can adjust cutting constantly throughout the operation depending on sunflower height and...

• 

  Capello Cereals - Grain Systems

  Revisited in a modern key, Grain System Evo is the extreme evolution of the field tested foldable cutting platform built since 1997. Always applicable to every type of combine harvester (available in cutting width up to 7 [m]), Grain System Evo is the best in class for operator visibility and road transportation.

• 

  Capello - Direct Cut Header

  Conceived for the full harvesting of every type of forage, both medium and large height. The SPARTAN direct-cut header comes from the desire to offer a wider range of harvesting equipment to satisfy the many needs of the modern retailer. Born to adapt to all brands of forage harvester, SPARTAN is available in two versions with different cutting width.

Products by Hatzenbichler Agro-Technik

• Inter Row Cultivation

• 

  Hatzenbichler - Finger Cultivator

  The finger cultivator can be used for the most current plants. For example: corn, sugar beet, soy, sunflower, pumpkin, strawberries and others. The min. row-distance is 25 cm, between rows. Universal principle for the finger cultivator: The gum-workstars work laterallly to the plantrow.  The stars work nearly 5cm under the soil and kill weeds. The min. row distance for the big finger cultivator with the yellow stars is 40cm. We have 3 different...

• 

  Hatzenbichler - Pumpkin Cultivator

  Special main frame with 3-point mounting, Sprung on taper roller bearings mounted, guidance discs. Easy changeable tool carriers for different crops mounted on the same parallelogram. Each rear mounted machine can easyly be converted with an adapter and used as fornt mounted.

• 

  Hatzenbichler - Sugar Beet Inter Row Cultivator

  Hatzenbichler sugar-beet cultivator for mechnical weed control in row crops. With varible width adjustment range for the base frame. Special Support tube with two- and three Point linkage, and sprung, automatically steerable tapered rollers mounted guide coulters can use for the rear or front mounted. Rigid or hydraulically folding for Transport. Parallelogram with Farmflex wheel, fitted with one bolt on the main frame, therefore row distance easy and...

• Cultivation

• 

  Model Disko - Subsoilers

  The Hatzenbichler subsoilers are known for their strong construction. This is achieved through a special way of construction. The square tubes used are not welded together, like this more load can be put on to the square tubing without being broken or deformed.

• 

  Hatzenbichler - Model Delta - Subsoil Plough

  The Hatzenbichler subsoilers are known for their strong construction. This is achieved through a special way of construction. The square tubes used are not welded together, like this more load can be put on to the square tubing without being broken or deformed. The fact that high quality tines and shares are used, you’ll find a longer lifetime!

Products by Micron Group

• Agriculture & Forestry

• 

  Micromax - Spinning Disc Rotary Atomiser

  Designed for vehicle-mounted blanket applications, Micromax is a spinning disc rotary atomiser for Controlled Droplet Application (CDA) of most water-based agrochemicals including herbicides, insecticides and fungicides.

• 

  AccuDos - Model 2P & 25P - Spray Nozzles

  Available in 2P and 25P models, the AccuDos is a professional spray applicator with the facility to 'dial-in' a pre-determined quantity of spray liquid for the accurate dispensing and delivery of a measured volume of spray liquid. A choice of flat fan or hollow cone spray nozzles, selected to deliver the appropriate droplet size range and spray pattern, is available to ensure spray is transferred accurately to the target. A non-drip check valve is...

• 

  Micron - Drop Spray System

  At Micron we are involved in the research, development and supply of agricultural and horticultural spraying technologies that offer both economic and environmental benefits to growers. The patented 'DropSpray' system has just been acquired by Micron having been initially developed by Benest Technologies.

• 

  Micron - Model Herbidome 350 - Shielded Sprayer for Weed Control

  The Herbidome 350 has been developed for use in a wide range of weed control situations. A rotary atomiser, designed for Controlled Droplet Application (CDA) application of herbicides, is mounted under a flexible circular shield which rotates freely resulting in efficient weed control and significant labour savings.

• 

  Micron - Model Herbi 4 - Hand Held Spinning Disc Sprayer

  The Herbi 4 is a hand held spinning disc sprayer for the Controlled Droplet Application (CDA) of herbicides. It can use CDA formulations or traditional water-based products at total spray volumes of only 10-30 litres/hectare.  The consistently large spray droplets of around 250 micron minimise any risk of spray drift and fall in a precise 1.2m wide circular spray pattern.

Products by Delimbe

• Couvert Vert

• 

  Delimbe - Model T15 - Microgranulator

  Small seed drill with blower, 80 or 120litres, issues from 5 to 10.

• Microgranulateur

• 

  Delimbe - Model T14 - Microgranulator

  Electric fertilizer 25,70 or 120litres, issues from 1 to 6, falling by gravity.

• Semoir Fertilizers

• 

  Delimbe - Model ENGR70L - Electric Fertilizer Sprayers

  70 or 120litres for Quad or tractor, working width 12metres. 70 or 120 litres polyethylene hopper. Working width 12 meters. Operates with two electric motors: one for the spreading plate and another for the electric opening-closing.

• 

  Delimbe - Model T18 - Electric Small Seeds Drill

  300litres tank, issues from 5 to 12. Frame: epoxy coated steel. The fan works with an electric 12 volts motor. The distribution is carried out by a separatly driven electric roller controlled by the in cab control box, three sorts of rotor available.

• Special Vine

• 

  Delimbe - Model T11 - Microgranulator

  Tank 80 or 120liters, electric distribution and fan. 80, 120liters polyethylene hopper capacity – 5 to 10 issues available (only 5 to 8 for cereals or Rye-grass). The blower works with an electric 12 volts motor. The rotor works with an electric motor, three sorts of rotor available according to the kind of seeds spreaded (small, medium or big).

• Salt

• 

  DELIMBE - Model T11 - Electric Salt Spreader

  70 or 120litres, working width 4metres, salt humid or dry. 70, 120 polyethylene hopper. Working width 4 metres with the possibility in option to reduce this width to 2meters.

Products by Carre

• Deep Soil Preparation- Ameublissors

• 

  Carre NEOLAB DELTA - Ameublissors

  NEOLAB is intended to replace the plough and to decompact with a V-mounted or in-line chassis and a clearance under the frame of 800 mm. NEOLAB works the soil without turning with 'Michel' tines, bolt or non-stop hydraulic safety devices, up to 0.50 m. The working widths vary from 2.50 to 4 m. NEOLAB can be fitted with corrugated double disc rollers, notched disc rollers or square bar rollers.

• Deep Soil Preparation- Subsoiler

• 

  Carre DECOMPACK - Subsoiler

  DECOMPAK is used for decompacting any type of soil, under the plough pan up to 40 cm, with a clearance under the frame of 800 mm. POLYLAB is used for 'pseudo-plough' decompacting with a clearance under the frame of 800 mm. There are 3, 5, 7 and 9-tine versions.

• Deep Soil Preparation- Cultivator and Stubble Plough

• 

  Carre ONATAR - Cultivator

  ONATAR is a semi-mounted tool for restarting ploughing and stubble breaking. The ploughing depth can be adjusted from 5 to 30 cm at 8 Km/h. With a choice of 5 tine models possible with a pitch of 275 on 4 beams, ONATAR provides an optimum flow of soil, even when there are significant residues. There are seven types of adaptable standard rear equipment. ONATAR comes in 6, 7 and 8 metre versions which can be folded hydraulically to 3 m for transport....

• Surface Soil Preparation- Danish Cultivators

• 

  Carre PENTASOL- Danish - Cultivator

  PENTASOL and POLYSOL are mounted 3-point tools for preparing a seedbed making it possible to work at a depth of up to 15 cm and an optimum speed of 12 km/h. Their immense versatility in terms of equipment, spacing and types of tine make them an ideal tool to cope with all types of soil and requirements. The tine distribution, over 4, 5 or 6 rows according to version, allows a flow which cannot be equalled. There are fixed versions, 2.70 and 3.30...

• Surface Soil Preparation- Tines Assistant for Sower

• 

  Combine Tines

  COMBINE is 3-point ride-on tools for seed bed preparation that can be combined with any type of mechanical or pneumatic seed drill. The number of passes is thus reduced. The great modularity of COMBINE enables it adapt to all types of soil and requirements. It is available in different versions: 3 to 6 m.

• Sowing - Fertilizing - Tine Seed Drill

• 

  PENTASEM - Tines Seed Drill

  PENTASEM is a ride-on simplified seeding tool with tines, associated with pneumatic distribution, adapted on a base close to that of PENTASOL. It is used to plant a crop at high speed, using straight 45 × 12 tines fitted with a seed broadcaster. The positioning of the tines in 5 rows simplifies and improves the flow of plant debris without any risk of jamming. The power required is 4 hp per tine for optimal use at 12km/h.

• Sowing - Fertilizing - Fertilizer Applicator

• 

  FERTILOC + - Fertilizer Applicator

  FERTILOC+ is a ride-on independent 3 point system for providing solid fertiliser to row crops. FERTILOC+ can also be used alone at the front or rear of the tractor. The fertiliser is spread by gravity, by electric or hydraulic blowers according to requirement.  The independent adjustment cells allow a variable flow rate of up to 450 kg/ha.