13 products found

Products

  • Bale Handling

  • Model M10G - Round Bales on Front Loader

    Model M10G - Round Bales on Front Loader

    Compact clamp with strippers with 4 curved  ø 25 mm tines.0.40 m gain in height thanks to offset or tines with respect to ground.grabs all round bales on cylindrical side or on the flat, as well as square bales (one at a time)Stores 4 round bales if the loader will lift to at least 3.40 m.Working capacity: 600 kg.

  • Model M10GS - Round Bales on Front Loader

    Model M10GS - Round Bales on Front Loader

    Like M10G on 3-positions section: +0.40 m to + 0.90 m.Locked by key pin.Stores 4 round bales stacked vertically if loader lifts to at least 2.90 m.working capacity: 600 kg.

  • Model M15DL - Square Bales Grippers

    Model M15DL - Square Bales Grippers

    With 2 ø 35 bayonet tines - effective lenght 1,10 m or 0,80 as an option. 1.20 m  between 2 tines - 3rd and 4th tines as an option - folding tines as an option.  Supplied with adjustable height support. capacity: 1500 kg.

  • Model MCE - Square Bales Grippers

    Model MCE - Square Bales Grippers

    Square Bales Grippers With 2 ø 35 bayonet tines - effective length 1.10 m or 0.80 m as an option. 1.20 m between 2 tines - with parallelogram pusher base. capacity: 600 kg.

  • Model MC4 - Square Bales Grippers

    Model MC4 - Square Bales Grippers

    Square Bales Grippers With 6 curved tines, ø 25, lenght 440 mm (530 as an option). Pick-up and deposit of bales in same direction.Great ease in picking up bales from the ground of from trailer: the bales are not pushed back. Great ease in depositing bales in stacks: the bales stay properly in place in the stack and do  not roll back towards the tractor.iIdeal for bales with a section of 0.50 x 0.80 (4 bales at a time) and for bales of 0.80...

  • Unwinder

  • ALTEC - Model DR160S - Unwinder

    ALTEC - Model DR160S - Unwinder

    Right side distribution (left side optionally).Easy to install on a telescopic handler, backhoe and havy front end loader.The loader arm can be easily added.Closed hopper : the bale won't fall out.DR160S with extra linkage for rear distribution

  • ALTEC - Model DR200S - Unwinder

    ALTEC - Model DR200S - Unwinder

    For bales up to ø 2 m.Right side distribution (left side optionally).Easy to install on a telescopic handler, backhoe and havy front end loader.The loader arm can be easily added, later.Closed hopper : the bale won't fall out.

  • Straw Spreader

  • LATERAL - Model Tractor Series - Straw Spreaders

    LATERAL - Model Tractor Series - Straw Spreaders

    Real straw saving and comfort By preserving long straw wisps, the well ventilated bedding is more flexible and lasts longer. Without excessive dust, and without the dangerous ejection of stones, straw is spread evenly and easily. Fitted on telescpic loader : see DR180 lateral or DR280 lateral.

  • Lateral - Model DR160A  - Straw Spreading

    Lateral - Model DR160A - Straw Spreading

    Distribution and straw spreading to the right side (opposite side as an opption).With loading arm : hydraulic arm adjustment as an option 1 DA.Fitted on front or rear 3 points linkage.

  • Lime Spreader

  • Lime  - Model EP600 and ER600 - Spreaders with Folding Booms

    Lime - Model EP600 and ER600 - Spreaders with Folding Booms

    ALTEC spreaders distributes regularly and with high accuracy, even onto slopes.The hopper's bottom distributes on its whole width and each boom is only 1.80m long. This is the reason for such a regular distribution.Both sides always turn at the very same speed, and the small boom's diameter also increases spreading accuracy.

  • Lime - Model EP2000 - Spreaders

    Lime - Model EP2000 - Spreaders

    Automatic 3-points coupling Norm 2 . Hopper EP2000 : 1,90m X 1,40m X H 1,25m. Tractor over 100hp required. Standard CapacitY 2000 litres

  • Bag Lifter

  • Model B100R  - Pivoting Bag Lifters

    Model B100R - Pivoting Bag Lifters

    The bags lifter can also unload the bags from the truck, all over the solo lenght wise or on an edge if its inserted with the spreader. Capacity 1000 kg to 2.50 m.

  • Model B150R  - Pivoting Bag Lifters

    Model B150R - Pivoting Bag Lifters

    The seed loading requires an adapted height of lifting to big capacity's seed drills. The ALTEC B150R answers to this need because it was designed specially for that purpose. With its rotating action eases the manoeuvre up to 160° sphere of activity. Capacity 1000 kg to 3.40 m