88 products found
Products by Baselier
-
Soil Cultivators
-
Baselier - Model FF - Front Cultivator
For cultivating the land at the same time with potato ...
-
Baselier - Model FKC - Rotary Ridging Cultivator
For cultivating and potato planting at the same time and as Rotary Ridging Cultivator after potato ...
-
Baselier - Model FK - Ridging Cultivator
For steady crumbling structure in heavy soils for making ridges for potatoes and ...
-
Baselier - Model FKV-FKVB - Full Width Rotary Cultivator
For even crumbling structure for seedbed preparation in heavy soils for potatoes and ...
-
Baselier - Model HFD-FK - HFD-FKV - Hydraulic Folding Cultivator
Hydraulic Folding Cultivator is designed for: Cultivate of beds before planting or sowing. Cultivate of grass-land and other ...
-
Baselier - Model UKF - Overtop Cultivator
BASELIER Overtop Cultivator buried stones and clods under the seedbed and cultivating of grass-land and other ...
-
Potato-Planter
-
Baselier - Model FA-W-FA-BW - Cultivator Potato-Planter
The combination, which is intended to be used on light and heavy soil, saves the grower one working passage, thus saving time and fuel. The machine cultivate first the ground over the full width. Above the cultivator is a 2 ton large hopper. The mechanical or hydraulic driven planting elements have found backwards a place behind the cultivator. After the ridging discs follows a ridging hood that the final ridges ...
-
Haulm Toppers
-
Baselier - Model LKB -LKHS - Haulm Topper
Baselier multi-purpose Hydraulic folding Haulm Topper for excellent topping of potatoes, chicory and ...
-
Baselier - Model LKA - Haulm Topper with Side Delivery
Baselier multi-purpose Hydraulic folding Haulm Topper with side delivery for excellent topping of potatoes, chicory and ...
-
Baselier - Model HFD - Hydraulic Folding Haulm Topper
Baselier multi-purpose Hydraulic folding Haulm Topper with side delivery for excellent topping of potatoes, chicory and ...
Products by Dacom
-
Dacom - Soil Sensor TerraSen Station - Basic
A TerraSen station BASIC consists of a TerraSen sensor with 5 sensors that measure soil moisture conditions, soil temperature and irrigation at several depths, a DSG 3.0 datalogger with solar panel and communication function. Complete with pole and ...
-
Irrigation Advice - - Agricultural Irrigation Data
Water is one of the most important factors in crop growth. To optimize yields this occasionally necessitates the irrigation of crops during the growing season. The Dacom Irrigation Advice module shows what the daily water consumption of the crop has been throughout the different soil layers and gives you advice on the optimal timing and amount of irrigation ...
-
Fungal Disease Control - Agricultural Data
Due to the increased aggressiveness of fungi and climate change effects, keeping diseases under control remains a major challenge for all growers. That is why it is very important to use the right fungicide at the right time. The Dacom fungal disease module provides advice regarding the best moment to use fungicides and which type of fungicide to ...
-
Insect Control - Agricultural Data
The Dacom insect control module provides advice regarding the insect’s current development stage. This allows the correct moment and the correct type of insecticide to be determined. Optimum insect control results in a better crop ...
-
Sensetion
-
Dacom - Soil Moisture Sensor / Smartphone App -Sensetion Single-pack
The Sensetion single-pack consists of an easy to install soil moisture sensor with a smartphone app for Android and ...
Products by Dewulf
-
Soil Cultivation
-
Miedema - Potato Planting Systems
Miedema potato planting systems offers farmers a professional range of potato planting machines. Choice is important and useful, because your planting conditions are different from those of your neighbour. That is why you turn to the potato planting specialist, Miedema, for the most profitable cup planters or belt ...
-
Dewulf Miedema - Model CB - Cultivator
The Miedema CB full field cultivator has been specially designed for use in combination with a Miedema CP or MS planter with ridging hood. This enables you to combine planting bed preparation, planting and ridging in a single step. You save time, money and man hours, and get a better ...
-
Miedema - Potato Cultivation Machinery
Alongside storage systems and planting and sorting equipment, Miedema is adding a new product group to its range: an extensive line of soil cultivation machinery for farmers. This includes a complete series of multiple-row, front and compact rotary cultivators as well as haulm toppers, designed and built by Struik in Wieringerwerf. Miedema opted for the delivery of these machines from Struik because of their excellent reputation and operational ...
-
Potato Planting
-
Dewulf Miedema - Model CP - Cup Potato Planter
The CP cup planting machine is a multifunctional potato planter whose quality has been thoroughly proven in practice. The Miedema CP combines high capacity, user-friendliness and planting accuracy, and is a model of potato-friendliness. It is also ideal as a combination machine for soil cultivation, fertiliser spreading, planting, crop protection and ridging in a single pass. You save on work, number of machines and fuel. All together, this means an ...
-
Potato Harvesters
-
Dewulf - Model Kwatro - 4 Row Self Propelled Potato Harvester
The Dewulf Kwatro 4-row potato harvester will go where no other harvester can go. The tracks ensure minimum soil compaction and will allow you to harvest even in tough weather conditions. With the harvest channel positioned in front of the tracks, the quality of the potato ridges is ...
-
Dewulf - Model R3060 - 2-Row Self-Propelled Potato Harvester
The Dewulf R3060, 2-row self-propelled potato harvester, has been proven and tested in potato fields worldwide. In wet or dry conditions, hilly or flat, the offset R3060 harvester has earned its stripes in countless, productive working ...
-
Dewulf - Model R4060 - 2-Row Self Propelled Potato Harvester with Elevator
The R4060 2-row self-propelled sieving harvester with elevator is based on a proven harvesting ...
-
Dewulf - Model R2060 - 2 Row Trailed Potato Harvester with Bunker
With the R2060 trailed potato harvester, Dewulf has built a high-performance machine that significantly improves working speed, ease of use and potato quality. Thanks to its modular concept, the R2060 bunker harvester is perfectly adaptable to your specific working ...
-
Dewulf - Model Torro - 2-Row Trailed Potato Harvester with Bunker
Dewulf Torro pays special attention to the product quality of the potatoes during harvesting. The 2-row trailed sieving harvester with bunker is equipped with 2 sieving webs in combination with a curved haulm conveyor, which is unique on the market. Thanks to its unique curve, the falling height is continuously limited to an absolute minimum and damage to the crop is ...
-
Carrot Harvesters
-
Dewulf - Model ZK II S - Carrot Harvester
Dewulf’s 2-row, self-propelled top lifting harvester with elevator. The pick-up element is fitted with teethed belts for lifting carrots, turnip, red beet, celeriac, etc. From the newest cabin, there is a perfect view created on the pick-up element, haulm separation unit and ...
-
Dewulf - Model ZBII - 2-row top lifting harvester with bunker
The ZBII is a self-propelled 2-row top lifting harvester with bunker. This harvester is highly manoevrable, has a 9 m³ bunker and impresses with its small turning radius. The ZBII is standard equipped with two hedgehog units. Thanks to the large surface area of the hedgehog units and the ability to change the speed and inclination angle, work can continue with optimum efficiency even in changing ...
-
Dewulf - Model GBI Series - 1-Row Trailed Carrot Harvester with Bunker
The Dewulf GBI 1-row carrot harvester is a productive and at the same time very cost-effective harvesting solution. The unbeatable Dewulf top lifting mechanism guarantees that your carrots are lifted without damage and that routine maintenance is reduced to a minimum. The 5-tonne hopper is ideal to ensure higher capacity on larger ...
-
Dewulf - Model GCCI - 1-row top lifting harvester with continuous container transport system
The GCCI, a trailed 1-row top lifting harvester with continuous container transport system, is flexible and productive. The harvester easily takes along four boxes for 1000 kg or eight boxes for 500 kg on the container transport system. A box filler with two fall breakers allows boxes to be filled in pairs. This increases the stability and reduces the pressure on the chassis. Thanks to the innovative container transport system the driver can offload boxes ...
-
Dewulf - Model P3 - 1-row mounted top lifting harvester
The modular P3 line, a 1-row mounted top lifting harvester, offers a solution that is fully compatible with any logistics system. The harvester is available in 5 different versions with either forks, a discharge elevator or bunker. The intuitive operating console was specifically designed to enable the user to harvest a perfect product with a minimum of operations. The harvester utilises hydraulic pipes, preventing pressure loss and heating, which can be ...
Products by Hortech srl
-
Soil Preparation Machine
-
Model AF SUPER - Front Rotor Blades
The bed former AF Super allows thanks to the front rotor blades to work vertically and deeply the soil without changing its own natural structure.A back rotor equipped with small teeth turns at a very high speed in the opposite direction, shatters the most superficial clods, moves the biggest clods to the front rotor, levels the soil and lightly presses it on the surface. It is possible to work at the same time with 2 or 3 machines model AF SUPER which ...
-
Model AI MAXI - Bed Former Stone Burier
The bed-former stone burier AI MAXI can create optimal conditions especially in heavy and stony soils which are very difficult to prepare for the sowing or for the transplanting. The good working of this machine is guaranteed by the only rotor which turns backwards and throws the stones and the biggest clods against a steel grate which filters them and buries them under a layer of about 10-20 cm. In this way the soil becomes soft, light and well levelled, ...
-
Perfecta - Soil Preparation Machine
Perfecta is the new soil preparation machine, with the same working system of the stone burier (model AI MAXI), or better, with a blade rotor assembled in the front of the machine that permits to work the soil deep into the ground from 5 to 20 ...
-
Transplanting Machine
-
Model Due Manual - Versatile Transplanting Machine
Due Manual is a very versatile transplanting machine because it can transplant square soil blocks, modules, bulbs, seeds and all kind of plants including the ornamental plants and the nursery plants.It is possible to transplant and/or mulch (plastic or biodegradable film, cellulose) at the same time. It is equipped with a double frame. The external frame which is mounted on 4 wheels is assembled together with an internal frame through a parallelogram ...
-
Model Practica - Transplanting Machine
Transplanting machine model Practica for modules. Among the most important features that characterise this transplanting machine we would like to underline the extreme precision of the transplanting, the outstanding performance on any kind of soil and the possibility to mount the machine in a fix or in a collapsible frame. Moreover the parallelogram structure, in which the independent transplanting units are mounted, permits the transplanting uniformity, ...
-
Harvesting Machine
-
Model Rapid T - Harvesting Machines
Rapid T is an harvesting machine for vegetables towed by a tractor and equipped with one row. The harvesting system consists in cutting the head with a serrated disc which turns all the times keeping itself cleaned and avoiding to dirty the product.A couple of belts carries the product till a work surface where it can be cleaned and put into boxes in the field or it can be conveyed into bins or into a ...
-
Model RAPID SL - Self Propelled Machine
Rapid SL is a self propelled machine for the harvest of vegetables. It is equipped with a diesel engine Kubota 37KW/50HP, with automatic pilot and with iron caterpillar tracks, which allow a regular forward movement on any kind of soil (wet soil, soil with uneven surface). Rapid SL can harvest on already mulched soil, on bare soil, on beds or on flat ground too.It can be personalized according to the customer’s requirements. The harvesting elements ...
Products by Manter International BV
-
Weighers
-
Model M8 - 8-Head Combination Weigher
8-head combination weigher for different ...
-
Model M8 Veg - 8-Head Combination Weigher
8-head combination weigher for cutted ...
-
Model M10 - 10-Head Combination Weigher
10-head combination weigher for different ...
-
Model M8 XL - 8-Head Combination Weigher
8-head combination weigher with XL size weighing buckets for different ...
-
Model M12 Ca - 12-Head Combination Weigher
12-head combination weigher especially for long products like ...
-
Baggers
-
Model MBP 2 - Bagplacer
MBP 2 - Manter Bagplacer 2 For placing automatically bags equipped with plastic strip and holes, underneath the filling opening of a Semi Automatc Bagger. In combination with the SAB 2 HS ( High Speed ) capable of processing of up to 20 bags/minute* at ...
-
Manter - Model RSB-M Series - Baggers
Fully automatic bagging machine for pre-made mesh bags from the roll.Packing range 2,5 - 25kg.Capacity at 5kg up to 24 bags/min 1.1 Depending on product and ...
-
Packing Fruit
-
Clamshell Filler
Automatic packer filling of shells with a lid. Shells are placed on conveyor belt manually. Can be combined with denester. To combine with every weigher. Measurements clamshells between L120xW80xH90 mm and max. L280xW180xH120. User friendly ...
-
Fruit Packing Clipper
Automatically packing into tubular net closed with a metal clip. Automatically change between 2 tubes with net-material. Can be equipped with printer and labelfeeder for wineglass-or clip-to-clip label. To combine with all kinds of weighing systems. User friendly ...
Products by Briggs Irrigation
-
4 Wheel Chassis Booms for Agriculture and Horticulture
Ranging in structural width from 50 to 76 metres, Briggs four-wheel chassis booms are efficient, tough, reliable and surprisingly versatile. Over 2000 4 wheel-chassis booms are in operation throughout the world. Irrigated widths are from 50m to 96m depending on the choice of nozzle or sprinkler mounted on each end of the boom. All are easy to operate, can be folded by one person in just a few minutes for transport and can be operated with almost any make ...
-
Briggs - Model R18 to R40 - Hosereel Mounted Booms for Agriculture and Horticulture
Designed and built to the same high standards as Briggs' larger models, the R18, R24, R30 and R40 mounted booms allow a lane spacing of 18 - 48 metres (other widths in between those shown are available on request). For ease of operation the booms are transported on the reel and a fixed hydraulic lift system has been developed to transport the booms safely. All models give accurate and uniform water distribution under a wide range of conditions, with a ...
-
Briggs - Model R46 - Hosereel Mounted Booms for Agriculture and Horticulture
Designed and built to the same high standards as Briggs' larger models, the R46/35, R46/40 and R46/46 mounted booms allow a lane spacing of 35 - 66 metres. For ease of operation the booms are transported on the hosereel and a fixed hydraulic lift system has been developed to transport the booms safely. All models give accurate and uniform water distribution under a wide range of conditions, with a controlled droplet size to match the crop. The booms ...
-
Briggs - Irrigation Hosereels
The Briggs brand of hosereels is based on the tried and tested Ocmis range, imported and adapted especially for the UK market. Each machine goes through a rigorous assembly, pre delivery inspection and testing program prior to despatch to ensure trouble free commissioning and ease of operation. Each of the highly efficient turbine powered units is packed with advanced features and the standard specification of all models is high. Even the smallest ...
-
Briggs - Diesel Engine Irrigation Pumps
Quiet, economical and powerful, Briggs pumpsets have proven reliability and feature a range of labour saving options. The pumpsets are based on JCB's modern, British-built Ecomax range which are fully compliant with the latest emissions regulations and also offer improved fuel economy, low noise levels and enhanced power and torque. Five engine sizes are available, from 74 - 173 hp, driving Caprari centrifugal pumps with Briggs engine protection systems ...
-
Briggs - Briggs Racecourse Irrigator
The Briggs Racecourse Irrigator has been developed specifically for the demands of the modern racing World and has been introduced on many courses in the UK and around the world. Accurate and uniform application across the width and length of the track are essential to provide even going and keep the turf in top condition. With the Briggs Racecourse Irrigation package this is possible in all but the worst weather conditions. A drive system has been ...
-
Briggs - Tied Ridger
The Briggs Tied Ridger has been developed to prevent rain and irrigation water run off from crops grown on sloping land, thus giving a dramatic reduction in surface erosion, fewer green potatoes, reduced fertiliser loss and a reduction in water requirement. The machine incorporates specifically designed paddle wheels to form and press consistently sized and spaced dams, that will be effective even on light land. It is heavily ballasted and runs on a depth ...
Products by Omnivent Techniek BV
-
Arable Solutions - Fans
We develop our fans ourselves, specifically for drying and storing arable products. That is how we make sure that our fans perform the best in your store. Check our fans here!
-
Omnivent Omni - Ventilating Comfortably Fan
In our OmniFans we apply 2 different drive technologies: Alternating Current (AC) and Permanent Magnet (PM). We have applied the AC fans in our storage solutions for years. PM fans are new, and have a big advantage. They are just as robust as the classic AC OmniFan, but they use less ...
-
Arable Solutions - Automation
There are many factors that affect the quality of your product. Therefore managing your store can be quite challenging. Our automation can help!
-
Omnivent OmniCuro - Flagship Storage Computer
You can use these functionalities anytime, anywhere, using the OmniTouch screen in your store, an app on your phone/tablet or via your computer, all with the same user-friendly interface. And, because we develop the OmniCuro software ourselves, you get regular updates to make sure that you can always use the newest ...
Products by Agricola Italiana S.n.c
-
SN Series
-
Agricola - Model SN-1-130 - Simple Compact Sowing Row Machine
Simple, compact model with one sowing row. Reaches very small distances between rows (int. 130mm), with excellent ...
-
Agricola - Model SN-2-130 - Two Fixed Sowing Rows Machine
Versatile, practical model with its two fixed sowing rows configuration (from 50 to 100mm]. Prefers farmed ...
-
Agricola - Model SN-3-130 - Three Fixed Sowing Rows Machine
Multifunction, robust model with its three fixed sowing rows configuration (from 30 to 50mm). Prefers farmed ...
-
AI Series
-
Agricola - Model AI-620 - Simple Linear Mechanical Sowing Machine
The simple, linear, mechanical sowing machine. AI-620 is designed to sow plants in continuous rows Offers users an excellent compromise between simple constructions and ease-of-use thanks to a variator regulation ...
-
Agricola - Model AI-640 SN - Modulate Sowing Units
Model suited for all plant types. Its bar configuration means you can modulate sowing units based on ...
-
Agricola - Model AI-640 SNT - Modulate Sowing Units
Model suited for all plant types. Its two bar configuration means you can modulate sowing units based on ...
-
Mais Series
-
Agricola - Model PK2D - Precision Pneumatic Seeders
PK2D model represent a new generation of precision pneumatic seeders design in Agricola Italiana. An hydraulic telescopic frame, in easily way thanks to the mechanical limits switches. Seeding precision and work quality are the features of the new sowing units, suitable for working on different conditions (traditional seeding and minimum tillage] because it is a double ...
-
Agricola - Model PKN - Precision Pneumatic Seeders
The PKN model is the next generation of precision pneumatic seeders designed by Agricola Italians. The sowing elements are arranged directly on the mam frame in order to make the seeder, more compact and stable. This is the main feature required for these types of seeding. There are multiple element configurations available the most common are: Beet version with balancer and wheel. Corn, sunflower and soybean version with disc openers and seed compactor ...
-
Other Products
-
Agricola - Model M815 - Self-Propelled Hydraulic Traction Sowing Machine
M-815 is a self-propelled hydraulic traction sowing machine. Thanks to its 17Kw petrol engine, it sows with ease even in small spaces. Versatile and compact, it guarantees the best result for your ...
-
Agricola - Model SN-1-130 - Hybrid Continuous Sowing Unit
SN IBRIDA is designed for continuous sowing unit formity, typical of the SN-1 -130 element, but spread ing seed ...
Products by KUHN S.A.
-
Ploughing - Mounted Reversible Ploughs
-
Kuhn Master - Model 103 NSH - 2 Bodies Mounted Reversible Ploughs
One-piece headstock - high strength linkages between headstock and frame - reinforced beam - sheath mounted skimmers adjustable in three dimensions - complete range of plough bodies - 14' or 16' working widths - a range of depth wheels (sizes, steel or rubber, position) - simplified offsetting with pre-set positions for different tyre spacings - instant angling adjustment by turnhandle - Non-Stop Hydraulic safety - long life wearing parts - many ...
-
Kuhn Multi-Master - Model 113 NSH - 3 Bodies Mounted Reversible Ploughs
One-piece headstock - high strength linkages between headstock and frame - reinforced beam - sheath mounted skimmers adjustable in three dimensions - complete range of plough bodies - multiple working widths - a range of depth wheels (sizes, steel or rubber, position) - combined offsetting / angling - Non-Stop Hydraulic safety - long life wearing parts - many additional ...
-
Tillage- Deep Working Cultivators
-
Kuhn - Model SO 270 - Sub Soilers
The heavy weight of the 125 square beam improves soil engagement and ensures regular working depth – The point to point distance can be adjusted to adapt to the working conditions. In the two body version, this adjustment enables loosening the soil of the tractor wheel tracks – Easy and economical maintenance thanks to the removable guard located on the front of the leg – The various models of points provide versatility of use. The fast ...
-
Kuhn - Model DC 301 - Soil Looseners
Soil loosener can be combined for work with power harrows or power tillers or solo with a roller - chassis of triangular design for an excellent weight/robustness ratio - Central working depth adjustment - rear offset of only 45 cm - symmetrical shares with special angles to evenly break up soil and lift up over the whole working width - Shearbolt ...
-
Dominator - Model DMR 4850-12 - Primary Tillage System
The DOMINATOR Primary Tillage System is changing fall tillage. This exciting new concept eliminates stalk shredding and extra seed bed preparation trips. By managing residue in the fall and leaving a more level fall seed bed condition, the DOMINATOR sets the stage for fast efficient spring seedbed trips and maximum ...
-
Tillage- Stubble Cultivators
-
Optimer - Model 403R - Stubble Cultivators with Discs
Stubble cultivator with independent discs, the OPTIMER+ is an ideal tool for shallow stubble cultivation at high speed. It facilitates forced emergence of weeds and volunteer seeds, decomposition of organic matter and allows maintaining maximum soil humidity. Its versatility also enables performing secondary tillage in order to obtain a good seedbed. The high under beam clearance (the highest on the market) pushes back the limits of use in residues and ...
-
Tillage- Disc Harrows
-
Kuhn - Model TDH 7300-18R - Seed Bed Tandem Disc Harrow
In sizes from 18' to 34', the Kuhn Kruase 7300 Flex Wing Tandem Disc Harrow offers a wide range of standard and optional equipment choices to match the specific tillage needs of your farm. Kuhn Krause 7300 Rock-Flex model discs feature C-Flex type bearing arms to 'flex' over stones and other obstacles. The 7300 cuts, sizes, and mixes residue into the soil for faster breakdown and earlier soil warm-up. Soil and residue are mixed thoroughly by the 22' full ...
-
Seeding- Front Hoppers / Seed Carts
-
Kuhn - Model TF 1512 - Front Hoppers
The TF 1512 front hopper completes KUHN’s range of front hoppers. It can be coupled to mechanical and pneumatic seed drills, precision seed drills and tillage machines. It’s the versatile seeding solution: one single hopper for seeding, fertilisation and planting cover ...
-
Seeding- Mechanical Seed Drills
-
Kuhn - Model MGD 5200-20 3PT - Grain Drills
The 5200 PRO Series grain drills are available in 15' or 20' sizes in 3-point mounts to meet your farm requirements. These drills have seeding capability for conventional or minimum-till with the PRO openers on 6", 7 ½" or 10" spacing; minimum-till or no-till with the HR PRO openers on 7 ½" or 10" spacing. Openers are also arranged with a 6 ½" stagger for excellent soil and residue flow. Kuhn Krause grain drills provide front drive ...
-
Maize Choppers
-
QUATTRO - Model MC 180 S - Maize Choppers
KUHN MC maize choppers distinguish oneself for high outputs with low input. Based on the MC 90 S TWIN this 4-row MC 180 S QUATTRO has two chopping wheels and feeding systems. The power transmission of the MC 180 S QUATTRO runs via the PTO drive shaft, V-belts and gears. This requires minimum maintenance. The MC 180 S QUATTRO is equally suited for front and rear mounting. Sharpening and re-adjusting the chopping wheel on the MC 180 S QUATTRO could not be ...
-
Kuhn - Model MC 90 S Twin - Maize Choppers
KUHN MC maize choppers distinguish oneself for high outputs with low input. Based on the MC 90 S this 2-row MC 90 S TWIN has an added weight of only 15%. The power transmission of the MC 90 S TWIN runs via the PTO drive shaft, V-belts and gears. This requires minimum maintenance. Sharpening and re-adjusting the chopping wheel on the MC 90 S TWIN could not be easier and faster. The second row is transported to the chopping wheel via the intake chain. The ...
-
Kuhn - Model MC 90 S - Maize Choppers
KUHN MC maize choppers distinguish oneself for high outputs with low input. The power transmission of the MC 90 S runs via the PTO drive shaft, V-belts and gears. This requires minimum maintenance. Sharpening and re-adjusting the chopping wheel on the MC 90 S could not be easier and faster. The discharge chute is hydraulically remote controlled from the tractor driver’s seat. Flap control is by means of a mechanical adjusting facility. Daily routine ...
-
Landscape Maintenance - Professional Duty Roadside Mowers
-
Kuhn MASTER - Model RSM 180 - Professional Duty Roadside Mowers
Roadside mower intended for maintenance of roadsides, paths, ditches and grassy areas – compact machine ideal for low power tractors – built-in mowing unit lift – possibility to adapt various types of tools (articulated hammer knives, hammer knives or universal knives) – Hood reinforced with a double sheet metal lining – Mechanical safety - Hydraulic lateral offset as ...
-
KUHN - Model RSM 210 - Professional Duty Roadside Mowers
Roadside mower intended for maintenance of roadsides, paths, ditches and grassy areas – compact machine ideal for low power tractors – built-in mowing unit lift – possibility to adapt various types of tools (articulated hammer knives, hammer knives or universal knives) – Hood reinforced with a double sheet metal lining – Mechanical safety - Hydraulic lateral offset as ...
Products by Samon Machine / Ellens Landbouwtechniek BV
-
Samon - Onion Harvesters
-
Samon - Rotating Bar Onion Harvester
The rotating bar harvester comes standard with a mechanical drive, rotating harvesting bar and feed roller. Thanks to a 40mm quadrangular harvesting bar, the machine creates significantly less soil disturbance, while ensuring efficient harvesting in wet weather ...
-
Samon - Disc Onion Harvester
The disc harvester is designed to dig cleanly into hard or heavy soil conditions. Due to its gentle crop handling, the harvester can harvest onions without creating significant soil disturbance. Employing a hydraulically driven disc for each crop row, it only disturbs the soil where the onions are planted. The lifted onions are delivered by a butterfly roller onto the webs, which employ mechanically adjustable rotary agitators. A compaction roller on the ...
-
Samon - Chisel Onion Harvester
The chisel harvester is a machine with a minimal number of moving parts, making it our most simple harvester. Its jaws are equipped with chisels across the entire width. An overhead valve closes the chisel at the end of the bed. The webs employs mechanically adjustable rotary agitators. A compaction roller on the underside of the machine levels the worked soil for a perfect finish. One or two sieving webs - equipped with two different folders made ...
-
Samon - Onion Toppers
-
Samon - Open Onion Haulm Topper
The Samon open haulm topper is designed to top and tail onions, while efficiently evacuating the soil and foliage. The open topper is fitted with side plates, and comes with three or four rotating shafts, each with two blades in the ...
-
Samon - Closed Onion Haulm Topper
The Samon enclosed topper is designed to handle large amounts of (foliage) haulm. The topper has three or four rotating shafts, each with two blades positioned diagonally behind each other. The haulm is discharged to the right by the displacement action of the blades. The specially shaped outlet ensures that the haulm is deposited in the tractor track so that it does not compromise the drying process of ...
-
Samon - 3 Bed Machines
-
Samon - 3-Bed Onion Harvester
The Samon 3-bed onion harvester is designed to increase capacity so that more focus can be placed on the harvesting ...
-
Samon - 3-Bed Onion Topper
The Samon 3-bed topper is designed to increase capacity so that more focus can be placed on the harvesting operation. The machine is equipped with three open toppers mounted in a folding frame. The topper comes standard with automatic depth control, ensuring accurate topping height. The topper is available in widths of 1.50, 1.80 and 2.00. The machine is equipped with a heavy-duty double bearing ...
-
Samon - Onion Loaders
-
Samon - Model SU2LS - Onion Loaders
The SU2LS is a further development of the SU1L, this is the largest onion loader in our range. The intake of the onionloader is equipped with a foamrubber roller. The 1st web is relatively narrow so that there is no more touched ground than is necessary. The foliage remains which often lie next to the swath are hereby ...
-
Samon - Model SU1L - Onion Loader
The onion loader is equipped with a feed roller that ensures no onions are left behind at the end of the row. A single sieve belt with adjustable rotary agitators cleans the soil, while an adjustable hedgehog belt removes weeds and haulm ...
-
Samon - Potato Windrowers
-
Samon - 2-Row Potato Windrower
The Samon 2-row potato windrower comes with two sieving webs. The inlet of the machine, which was recently placed on the market, is equipped with diabolos and discs. The machine comes standard with wheels and a central delivery conveyor. Optionally, a side discharge conveyor can be used to deliver the harvested potatoes to the next ...