15 products found
Aqua Fitting Products
-
Model DIN3352-F4 - Gate Valve Non-rising Stem Resilient Seated
Design conforms to DIN3352 .Face to face dimension conforms to DIN3202 F5 (EN558-1 series 15/ISO5752 series 15).Flange Driling Conforms to DIN 2533 ,EN1092-2.Valves test to DIN3230 /ISO5208.Full bore ensured. Resilient seated gate valve.Body and bonnt of Ductile Iron.Wedge of ductile iron,fully encapsulated with EPDM(NBR)rubber.Bonnet gasket in groove between body the bonnet .Countersunk bonnet bolts encircled by the bonnet gasket and sealed with hot melt ...
-
Model BS5163 - Non-rising Steam Resilient Seated Gate Valve
Resilient seated gate valves are suitable for drinking water and waste water ,which can be installed under or above ground. The perfect choice for ...
-
Model C219 - Dismantling Joint
Manufactured to AWWA C219 under quality management systems accredited to ISO 9001:2000, the AQUAFITTING dismantling joint assembly is a double flanged composite fitting featuring a telescopic action between a flanged spigot and a flange adaptor. The joint is designed to provide longitudinal adjustment in flanged pipe systems. Dismantling joints provide a simple method for the installation and removal of flanged valves, pumps, flow meters, flanged pipes ...
-
Universal Coupling
AQUAFITTING RANGER products, in the form of wide range couplings and flange adaptors,are designed to join pipes of various outside diameters with the same or different nominal bore. Because of the wide range tolerance on O.D. (Up to23mm) a single AQUAFITTING RANGER coupling can connect steel, ductile iron, UPVC, cast iron, asbestos cement and other rigid pipe materials. The ability of AQUAFITTING RANGER couplings to join dissimilar pipe materials is a ...
-
Aqua Flex
Aqua Flex is a comprehensive ranges of stainless steel repair and tapping products,,design to serve the needs of today"s water & gas industry.Avaliable in varous clamp lengths and suitable for virtually any pipe material.Aqua Flex products are available with either EPDM or NVR ,with a maximum operating temperature of 40 ...
-
Valves
-
AQUA - Model AQV-GT-1001 - Resilient Seated Gate Valves
Resilient seated gate valves are suitable for drinking water and waste water ,which can be installed under or above ground. PN16 operating ...
-
AQUA - Model AQV-GT-1002 - Resilient Seated Gate Valves
Resilient seated gate valves are suitable for drinking water and waste water ,which can be installed under or above ground. PN16 operating ...
-
AQUA - Model AQV-SR-1001 - Strainer
Design:EN1074. Type :Y type,Thread end. Class : Class 125 ,PN6-PN10-PN16. Face to face : According to buyer’s requirement.. Flange : ANSI /AWWA B 1 20.1 ,BS21,DIN2999,ISO 7/1. Testing : EN12266. Size :1 ...
-
AQUA - Model AQV-SR-1002 - Strainer
Design:EN1074. Type :Y type,Flange end, heavy duty. Class : Class 125 ,Class 150,PN6-PN10-PN16. Face to face : EN558-1 Series 1. Flange : ANSI B 16.1 Class 125 ,Class 150,EN1092-2. Testing : EN12266. Size :1 ...
-
AQUA - Model AQV-AR-1001 - Air Valves
Design:EN1074-4. Type :Flange end, with inner isolation valve. Class : Class 125 ,Class 150,PN6-PN10-PN16-PN25. Flange : ANSI B16.1 Class 125,Class 150,EN1092-2. Testing : EN12266. Size ...
-
AQUA - Model AQV-AR-1002 - Air Valves
Design:EN1074-4. Type :Flange end, with inner isolation valve. Class : Class 125 ,Class 150,PN6-PN10-PN16-PN25. Flange : ANSI B16.1 Class 125,Class 150,EN1092-2. Testing : EN12266. Size ...
-
AQUA - Model AQV-GB-1001 - Globe Valves
Design:MSS SP-85. Type :Straight type,Flange end. Class : 125 PSI,150 PSI. Face to face : MSS SP-85. Flange : ANSI B1 6.1 Class 125,Class C150. Testing : MSS SP-85. Size :1 ...
-
AQUA - Model AQV-GB-1002 - Globe Valves
Design:MSS SP-85. Type :Angle type,Flange end. Class : 125 PSI,150 PSI. Face to face : MSS SP-85. Flange : ANSI B1 6.1 Class 125,Class C150. Testing : MSS SP-85.Size :1 ...
-
AQUA - Model AQV-BV-1001 - Ball Valve
Design:JIS 7S-48. Type :Full bore,Flange end. Class : JIS 10K/16K. Face to face : EN558-1 Series 3. Flange :JIS B 2212. Testing :JIS B 2003. Size ...
-
AQUA - Model AQV-BV-1002 - Ball Valve
Design:DIN3357. Type :Full bore,Flange end. Class : PN6-PN10-PN16. Face to face : EN558-1 Series 20. Flange : EN1092-2. Testing :EN12266. Size ...