7 products found
Biogasclean A/S Products
-
BioGasClean - Biological H2S Removal Systems
The system with tanks built on-site is used at ethanol distilleries and paper mills. Each gas cleaner is designed to the project specific biogas flow and H2S load and comprise the following 3 main systems: The PTU - Process Technique Unit - is the machine room and contains circulation pumps, air blowers, PLC controller board, etc., installed in a in a customized FRP housing or modified shipping ...
-
Model ECO - Automated Gas Cleaning Systems
Easy to ship worldwide; the gas cleaner can be shipped on a truck or in one 40 feet container. The PTU – the Process Technique Unit - is the machine room and contains PLC controller board, circulation pump, air blower, valves, flow meters and – if required – also gas detector system and heating system installed in a small custom built fiberglass container. The scrubber tank is ...
-
Model Basic - Automated Gas Cleaning Systems
Most affordable; the costs are kept down as the tank is without grating and not designed for being filled with water and the control center is skid mounted. The PTU – the Process Technique Unit - is the control center with PLC controller board, circulation pump, air blower, valves, flow meters and - if required – also heating system installed on a skid. The scrubber tank is manufactured in high ...
-
Model OS - Automated Gas Cleaning Systems
For high H2S loads. This type is for large H2S loads at a.o. ethanol distilleries and paper mills. The diameter of the tank is so big that it is not possible to transport from a workshop; therefore the tank is manufactured on site. The PTU – the Process Technique Unit - is the machine room and contains PLC controller board, circulation pump, air blower, valves, flow meters, gas detector system and – if required – ...
-
Model MUW - Anaerobic Digester System
In many projects we use treated water from an anaerobic digester or an aeration pond as scrubber liquid and nutrient source. This is more easily available and cheaper than soft water and industrial fertilizer. In order to prevent clogging inside the scrubber tank the treated water is first pre-treated with sulfate from the biological process in MUW(Make-Up-Water) ...
-
Model QSR - Scrubber Tank
The popular choice. This type is for smaller and larger H2S loads. We manufacture fiberglass tanks in several countries to reduce transportation costs. The PTU – the Process Technique Unit - is the machine room and contains PLC controller board, circulation pump, air blower, valves, flow meters, gas detector system and – if required – also heating system installed in a custom built fiberglass container or a modified shipping ...
-
Chillers System
After H2S removal the gas is fully saturated with water; the relative humidity (RH) is 100%. If water droplets should reach the cylinder heads and combustion chambers the water will destroy the oil film. This will lead to increased wear of moving parts as well as substantial reduction of the lifetime of the engine oil. Therefore, it is necessary to dry the gas to avoid condensation in the pipe system and the engine’s gas train and ...