11 products found

Products

  • Single Shoot Openers

  • Model 047-ASY-1000 - Single Shoot Openers

    Model 047-ASY-1000 - Single Shoot Openers

    Seed is delivered through the precision funnel opening. Front delivery provides precise seed delivery and reduces plugging with better soil flow. Extra hard surfacing on critical wear areas to increase the life of the holder. 50° shanks require either the 880-WDG-0300 or 880-WDG-0301. Focus strip 047-ACC-0001 can be added to direct the flow of seed in a focused row behind the opener. (Sold separately.)

  • Model 047-ASY-1005P - Single Shoot Openers

    Model 047-ASY-1005P - Single Shoot Openers

    Seed is delivered through the precision funnel opening. Front delivery provides precise seed delivery and reduces plugging with better soil flow. Phosphorus is delivered onto the seed bed, below the seed. Extra hard surfacing on critical wear areas to increase the life of the holder. 50° shanks require either the 880-WDG-0300 or 880-WDG-0301. Focus strip 047-ACC-0001 can be added to direct the flow of seed in a focused row behind the opener. (Sold...

  • Multi-Shoot Openers

  • Model 610-TIP-4041 - Paired Row Multi-Shoot Openers

    Model 610-TIP-4041 - Paired Row Multi-Shoot Openers

    ” Paired Row with 3/4” Horizontal and NO Vertical Seed/Fertilizer separation. Seed is directed rearward through an open bottom tip which quickly positions the seed into two seed rows 2-1/2” (63.5 mm) apart onto a firm, unfractured seedbed. Fertilizer is delivered on the same level as the seedbed in a 3/4” (19 mm) wide band between the two rows of seed.

  • Seed Boot Attachments

  • Model 300-HLD-5000 - Seed Boot Attachments

    Model 300-HLD-5000 - Seed Boot Attachments

    This holder has 2-1/4″ (57 mm) bolt hole spacing. The bolt hole section is flat and has two sets of holes. The top set of holes should be used in almost all cases when mounting this holder to the shank. It fits on the Bourgault chisel plow shanks as well as the LH755 shank used on the Morris Magnum III and the Morris Concept 2000.

  • Speed-Loc- Adapters

  • Fertilizer Knives

  • Model 050-KNH-0820 - Fertilizer Knives

    Model 050-KNH-0820 - Fertilizer Knives

    The welded tube fits 1/2” (12 mm) cold-flow anhydrous kits. Fits 1-3/4” – 2-1/2” bolt hole spacing. Not recommended for rocky areas. Can be converted to a pressurized NH3 or liquid system. Please call the factory for more details.

  • Model 599-KNH-7540 - Fertilizer Knives

    Model 599-KNH-7540 - Fertilizer Knives

    Accepts 1-1/4” (31 mm) and 1-1/8” (28 mm) granular hose(with 880-BSH-1130). 1-3/4” (45 mm) bolt hole spacing designed to fit on 47° shank. This is the most durable opener that we provide for fertilizer placement. This opener is designed to fit on the Bourgault shank better than the 600 Series.

  • Model 600-KNH-7520 - Fertilizer Knives

    Model 600-KNH-7520 - Fertilizer Knives

    This is the most durable opener that we provide for fertilizer placement. The tube fits 1/2” (12 mm) cold-flow anhydrous kits. Fits 1-3/4” (44 mm) to 2-1/2” (63 mm) bolt hole spacing. Use on a 43° shank with the addition of a 7° wedge. Can be converted to a pressurized NH3 or liquid system. Please call for more details.

  • Tillage- Sweeps & Spikes

  • Model 200 Series - Sweeps Tillage

    Model 200 Series - Sweeps Tillage

    What’s in a sweep? Most sweeps on the market today are made with very comparable material. If the material used doesn’t set the sweep apart, then what makes the difference in the life and quality of a sweep?. Precise Heat Treatment. Long-Lasting Design. Consistent Quality. Innovative Speed-Loc™ Technology