C B Norwood Distributors Limited

20 products found

Products by Great Plains Manufacturing

  • Vertical Tillage

  • Great Plains  - Model SS1300 Series - Inline Sub-Soiler

    Great Plains - Model SS1300 Series - Inline Sub-Soiler

    The Great Plains Inline Sub-Soiler is another step in the evolution of our vertical tillage family designed to eliminate yield-robbing compaction layers created by horizontal tillage tools such as plows, disks, and sweep implements.

  • Cultivators

  • Great Plains - Model 8000 Series - Disc-O-Vator Narrow Tillage

    Great Plains - Model 8000 Series - Disc-O-Vator Narrow Tillage

    Great Plains has raised the bar with the introduction of the new 8000 Disc-O-Vator Narrow line of four new models specifically designed for narrow transport needs and can be purchased in 15' to 24' versions. Seven-inch shank  spacing with 9' sweeps ensure good cutout.

  • Soil Looseners

  • Great Plains Simba - Model DTX Series - Soil Looseners

    Great Plains Simba - Model DTX Series - Soil Looseners

    Now available with a new hydraulic auto-reset tine option and a choice of six rear rollers, the Great Plains Simba DTX® is extremely versatile. Designed as a mounted one pass stubble incorporator/soil loosener for tractors in the 200-360hp range, it can be used as a first entry machine into non- inversion tillage or to knock down ploughing, whilst loosening down to 400mm. It is also ideally suited to establishing oilseed rape straight into...

  • Sprayers

  • Great Plains  - Model 3P300  - 3-Point Sprayer

    Great Plains - Model 3P300 - 3-Point Sprayer

    Great Plains 3-Point Sprayers are designed to float over rough, undulating terrain. These Sprayers feature our Level-Float design for top-of-the-line coverage with less gouging and skipping than our competitors'. Unlike most 3-point sprayers, the Great Plains 3P300 Sprayer has a capacity to hold up to 300 gallons of spray solution, allowing you to cover more acres in a day. The unique close couple design and elliptical shape enable you to lift...

  • Compact Drills

  • Great Plains - Model 1006NT - End Wheel No-Till Compact Drill

    Great Plains - Model 1006NT - End Wheel No-Till Compact Drill

    From food plots to food production, the Great Plains 10' End Wheel No-Till Drill (1006NT) is the ideal combination between the productivity of a large drill and the versatility of a compact one. This machine is perfect for seeding into pasture renovations and foot plots, and has long been used by conservation groups like Pheasants Forever chapters, NRCS offices, and roadside construction outfits that need machines to rent out that are simple to...

  • Air Drills

  • Great Plains - Model 3N-4010HDA - Air Drills

    Great Plains - Model 3N-4010HDA - Air Drills

    Use of the 10HD Series Opener has been expanded to include the 3N-4010HDA No-Till Air Implement. This implement utilizes a floating tongue and 12-degrees of wing flex up and down to follow contours and negotiate uneven terrain.The heart of this implement is the parallel linkage 10HD opener with over 10' (25.4cm) of vertical travel, 15' (38.1m) 4mm disk blades, and heat-treated blade separators to provide an accurate seed furrow. The...

Products by KUHN S.A.

  • Kuhn Ploughing

  • Kuhn MASTER  - Model 103 NSH  - 2 Bodies Mounted Reversible Ploughs

    Kuhn MASTER - Model 103 NSH - 2 Bodies Mounted Reversible Ploughs

    One-piece headstock - high strength linkages between headstock and frame - reinforced beam - sheath mounted skimmers adjustable in three dimensions - complete range of plough bodies - 14' or 16' working widths - a range of depth wheels (sizes, steel or rubber, position) - simplified offsetting with pre-set positions for different tyre spacings - instant angling adjustment by turnhandle - Non-Stop Hydraulic safety - long life wearing parts - many...

  • Kuhn MULTI-MASTER  - Model 113 NSH - 2 Bodies Mounted Reversible Ploughs

    Kuhn MULTI-MASTER - Model 113 NSH - 2 Bodies Mounted Reversible Ploughs

    One-piece headstock - high strength linkages between headstock and frame - reinforced beam - sheath mounted skimmers adjustable in three dimensions - complete range of plough bodies - multiple working widths - a range of depth wheels (sizes, steel or rubber, position) - combined offsetting / angling - Non-Stop Hydraulic safety - long life wearing parts - many additional options.

  • Kuhn Tillage- Deep Working Cultivators

  • Kuhn - Model SO 270 - Sub Soilers

    Kuhn - Model SO 270 - Sub Soilers

    The heavy weight of the 125 square beam improves soil engagement and ensures regular working depth – The point to point distance can be adjusted to adapt to the working conditions. In the two body version, this adjustment enables loosening the soil of the tractor wheel tracks – Easy and economical maintenance thanks to the removable guard located on the front of the leg – The various models of points provide versatility of use. The...

  • Kuhn - Model DC 301 - Soil Looseners

    Kuhn - Model DC 301 - Soil Looseners

    Soil loosener can be combined for work with power harrows or power tillers or solo with a roller - chassis of triangular design for an excellent weight/robustness ratio - Central working depth adjustment - rear offset of only 45 cm - symmetrical shares with special angles to evenly break up soil and lift up over the whole working width - Shearbolt safety.

  • DOMINATOR  - Model DMR 4850-12 - Primary Tillage System

    DOMINATOR - Model DMR 4850-12 - Primary Tillage System

    The DOMINATOR Primary Tillage System is changing fall tillage. This exciting new concept eliminates stalk shredding and extra seed bed preparation trips. By managing residue in the fall and leaving a more level fall seed bed condition, the DOMINATOR sets the stage for fast efficient spring seedbed trips and maximum yields.

  • Tillage- Stubble Cultivators

  • OPTIMER - Model 403R - Stubble Cultivators with Discs

    OPTIMER - Model 403R - Stubble Cultivators with Discs

    Stubble cultivator with independent discs, the OPTIMER+ is an ideal tool for shallow stubble cultivation at high speed. It facilitates forced emergence of weeds and volunteer seeds, decomposition of organic matter and allows maintaining maximum soil humidity. Its versatility also enables performing secondary tillage in order to obtain a good seedbed. The high under beam clearance (the highest on the market) pushes back the limits of use in residues...

  • Kuhn Tillage- Kuhn Disc Harrows

  • Kuhn - Model TDH 7300-18R - Seed Bed Tandem Disc Harrow

    Kuhn - Model TDH 7300-18R - Seed Bed Tandem Disc Harrow

    In sizes from 18' to 34', the Kuhn Kruase 7300 Flex Wing Tandem Disc Harrow offers a wide range of standard and optional equipment choices to match the specific tillage needs of your farm. Kuhn Krause 7300 Rock-Flex model discs feature C-Flex type bearing arms to 'flex' over stones and other obstacles. The 7300 cuts, sizes, and mixes residue into the soil for faster breakdown and earlier soil warm-up. Soil and residue are mixed thoroughly by the 22'...

  • Seeding- Front Hoppers / Seed Carts

  • Kuhn - Model TF 1500 - Front Hoppers

    Kuhn - Model TF 1500 - Front Hoppers

    Large capacity front hopper for metering seeds or fertilizer – central volumetric metering unit with electric drive –QUANTRON S-2 electric control box – hopper cover – filtering sieve – VARIO blower driven by the machine’s independent hydraulic circuit (pump connected to the tractor front pto) or LS blower driven by the tractor’s hydraulic circuit – coupling by carrying frame or integrated front packer...

  • Model TT 3500 - Seed Cart

    Model TT 3500 - Seed Cart

    High capacity seed cart designed for seeding as well as fertilization – Equipped with volumetric metering unit with electric drive system for operations up to 6.00 m in width – Compatible with the SEEDFLEX coulter bar, MAXIMA 2 or PLANTER 3 precision seed drills and with the strip-till tool STRIGER – High operating range with a capacity of 3,500 litres, i.e. 2,800 kg of wheat seed or 3,500 kg of fertilizer – Hopper control...

  • Seeding- Mechanical Seed Drills

  • KUHN - Model MGD 5200-20 3PT - Grain Drills

    KUHN - Model MGD 5200-20 3PT - Grain Drills

    The 5200 PRO Series grain drills are available in 15' or 20' sizes in 3-point mounts to meet your farm requirements. These drills have seeding capability for conventional or minimum-till with the PRO openers on 6', 7 ½' or 10' spacing; minimum-till or no-till with the HR PRO openers on 7 ½' or 10' spacing. Openers are also arranged with a 6 ½' stagger for excellent soil and residue flow. Kuhn Krause grain drills provide front...

  • Fertiliser Spreaders- Twin Disc Fertiliser Spreader

  • AXERA  - Model H EMC - Twin Disc Fertiliser Spreader

    AXERA - Model H EMC - Twin Disc Fertiliser Spreader

    Compact frame with reduced overhang (53cm) - High flow rate (more than 400 kg/min) for a high work output - Capacity increased simply by adding an extension (from 1100 to 3200 liters - Integral stainless steel guard surrounding the discs - Quick-fit discs - Hard coated pallets - D.F.C graduated quadrant with graduation proportional to the application rate - ultra-slow rotating agitator (17rpm) - hydraulic disc drive -...

  • AXIS  - Model 20.2 K D C - Twin Disc Fertiliser Spreader

    AXIS - Model 20.2 K D C - Twin Disc Fertiliser Spreader

    Model without electronic regulation for reaching high work output. The right dose at the right place while avoiding the « dose effect » thanks to the revolutionary distribution of the CDA System, common to all AXIS fertilizer spreaders.

  • Landscape Maintenance - Professional Duty Roadside Mowers

  • Kuhn MASTER  - Model RSM 180 - Professional Duty Roadside Mowers

    Kuhn MASTER - Model RSM 180 - Professional Duty Roadside Mowers

    Roadside mower intended for maintenance of roadsides, paths, ditches and grassy areas – compact machine ideal for low power tractors – built-in mowing unit lift – possibility to adapt various types of tools (articulated hammer knives, hammer knives or universal knives) – Hood reinforced with a double sheet metal lining – Mechanical safety - Hydraulic lateral offset as option.

  • KUHN - Model RSM 210 - Professional Duty Roadside Mowers

    KUHN - Model RSM 210 - Professional Duty Roadside Mowers

    Roadside mower intended for maintenance of roadsides, paths, ditches and grassy areas – compact machine ideal for low power tractors – built-in mowing unit lift – possibility to adapt various types of tools (articulated hammer knives, hammer knives or universal knives) – Hood reinforced with a double sheet metal lining – Mechanical safety - Hydraulic lateral offset as option.