10 products found
Carboline Products
-
Acrylics
-
Carboline - Model 3300 - Ceramic Blend
Carbotherm 3300 is a ceramic blend insulative composite coating formulated in a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keeps structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating ...
-
Driquik - Model W/R VOC DTM - Water Based Ceramic Blend
One component, water based, low VOC, low gloss, Direct to Metal (DTM) acrylic latex coating that provides an excellent moisture ...
-
Polyclad - Model TC-55 - Adhesive - Sealer
TC-55 Sealer may be used as an adhesive and/or sealer with cementitious sprayed fire resistive materials and insulation products. TC-55 Sealer improves adhesive bond of fireproofing and insulation products to steel, concrete and other substrates. When applied as a topcoat/sealer, it improves most physical characteristics, reduces air erosion losses and may be used to color the fireproofing or insulation ...
-
Alkyds
-
Carboline - Model A-20 - Accelerator Powder
Accelerator A-20 is a powder mixed with water and injected into gypsum based fireproofing materials to reduce the set time and increase production rates. Also, Accelerator A-20 can be injected into portland cement-based fireproofing materials to reduce the set time. Accelerator A-20 can be used with Southwest Type 5GP, 5MD and 7GP ...
-
Acrilast Caulk - Model II - Gun-Grade Neutral-Cure Silicone Sealant
Acrilast Caulk II is a gun-grade, neutral-cure silicone sealant designed for use in joint terminations of Pyrocrete® Fireproofing products and dissimilar ...
-
A/D Firefilm - Model III C - Decorative Fiber
A/D Firefilm III C is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes in clean room and sterile ...
-
Coal Tars
-
Bitumastic - Model 300 M - Renowned High Build Coal Tar Epoxy Polyamide
Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial ...
-
Bitumastic - Model 300 M COE - Renowned High Build Coal Tar Epoxy
Renowned high build coal tar epoxy for protection for steel and concrete in single or two-coat applications developed specifically for the Corps of Engineers ...
-
Bitumastic - Model 50 - Ultra-High Build, Single-Component Coal Tar Mastic Epoxy
Ultra-high build, single-component coal tar mastic for protecting steel and concrete substrates subject to aggressive conditions and for below grade damp proofing ...
-
Epoxy Amines
-
Carboguard - Model 1207 - Ultra-Durable Solvent-Free Coating
Ultra-durable solvent-free coating for use on steel and concrete substrates subject to severe impact and physical abuse. This aggregate filled coating offers exceptional abrasion resistance in heavy-duty marine and splash zone environments. It is ideal for high abuse areas on offshore structures exposed to aerated sea water (splash zone), boat landing areas, or working decks, lay down areas, helidecks, or walkways. It can be also be used for buried pipe ...