21 services found
CETCO Energy Services Services
-
Wastewater Treatment Services
Leading the wastewater treatment market for more than 35 years with one-step flocculant technology and quality service. CETCO’s Wastewater Treatment Division provides clay-based chemicals that will remove emulsified oils, heavy metals and suspended solids from water allowing economical disposal or recycling of your industrial waste stream. Our one-simple step products are backed by a wealth of technical support providing customers ease of mind ...
-
ORCA™ Consulting Services
Objectivity through Root Cause Analysis; Through ORCA™ ,consulting services CETCO provides holistic solutions, development planning and in-house technical expertise and support for oil and gas operators worldwide. By objectively identifying and correcting the root cause of events, ORCA™ demonstrates the commitment to provide value added services for our customers. It is important to maintain the objectivity of consulting services to the ...
-
Water Treatment Services
-
CrudeSorb - Drilling Waste Treatment
This adsorption media is based on resin, polymer, and clay technologies. CrudeSorb is extremely efficient at removing oil, grease, and soluble organics from water ...
-
CrudeSorb MR - Mercury And Arsenic Removal Media
This media is based on organoclay technology like CrubeSorb but has been heavily modified to enhance mercury and arsenic adsorption through both physical removal and chemical ...
-
Hi-Flow Process
CETCO Oilfield Services Hi-Flow Process can treat high rates of produced water, allowing the operator to return the produced water back into the environment in compliance with state and federal regulations. Our Hi-Flow Process gives you the flexibility you need in having one solution for many applications - the Hi-Flow process can handle small to large volumes of liquid, from 1,000 BWPD to more than 40,000 BWPD; it is not hindered by large fluctuations in ...
-
CrudeSep - Produced Water Treatment
CrudeSep is a compact 4-phase separator designed to treat produced water, reducing oil content in the water to acceptable discharge levels over a wide range of flow rates and conditions. Oil in water reduction to 5 ppm (or below 10 ppm) are achievable dependent on water conditions. CrudeSep is a produced water treatment vessel operating at near atmospheric pressure. Oil recovery and solids removal is achieved by induced gas flotation and a cyclonic motion ...
-
FlexTreat Treatment of Problematic Fluids
CETCO Oilfield Services wastewater treatment experience has culminated in the design and implementation of a multi-stage treatment package. FlexTreat is a system which combines conventional water treatment technologies and proprietary media to effectively process wastewater of wide ranging and uncertain composition. Wastewater from a variety of different sources which contains solids, crude oil, drilling waste and production chemicals is treated to ...
-
Wellhead Cyclonic Desander
The Wellhead Cyclonic Desander is an innovative product from CETCO which enables the recovery of sand product from multi-phase well streams during well clean-up operations. The well fluids are routed from the wellhead to the upper section of the desander vessel. The well fluids enter the vessel then hit a deflector plate offset at a 45° angle resulting centrifugal force exerted on the spinning fluid pushes the denser phase (sand) to the wall of the ...
-
Bulk Oil and Chemical Treatment
CETCO Oilfield Services can remove bulk oil through gravity and flotation technology. The process stream enters the 120 barrel separation (weirbox) or sparging tank comprised of four individual compartments. Each compartment has chemical injection, sparging, and oil separation capabilities. The tank provides a great deal of flexibility in breaking emulsions, segregating solids, and recovering oil. Any unexpected surges of oil, solids, and undesirable ...
-
NEMOH Subsea Water Treatment
NEMOH (Nomadic Environmental Media Operated Host), is a novel, patent pending treatment vessel developed by CETCO Oilfield Services for processing and retaining fluid in a subsea environment. It is remotely operated and can operate at depths over 6,000 ft. NEMOH is an innovative solution for the problematic treatment of fluids at subsea levels and offers flexibility - it is able to be recovered in a reverse process, disconnected, or be guided by an ROV ...
-
Pipeline Services
-
High Pressure Separators
Our line of separators is extensive and varied and they mirror the requirements of our well testing customer’s diversified needs. Therefore, we are able to handle 2, 3 or 4 phase separation at pressures up to 2,000 psi WP and rates from 8 MMscfd / 1,000 Bbld to 600+ MMscfd / 65,000 Bbld. Units are skid or trailer mounted for fast rigging and ease of operation. Multiple vessels may be called upon to conduct a specific project in the safest and most ...
-
Low Pressure Separators
Like our high pressure separators, our fleet of low pressure vessels is large and diverse in design, function and setup. These vessels range from 75 psi WP (pressurized tanks) to 230 psi WP. These vessels perform exceptionally well in totally controlling the pipeline’s effluent and in insuring that a liquid sent to storage is acceptably “dead”. Expensive liquids used during cleansing operations can often be resold or returned for credit which makes their ...
-
Dual Service Filtersep
Dual Service Filtersep is used in dry or liquid Pigging applications to insure the lines are free of debris (Black Powder) or other particulates. Flow can’t be interrupted; chemical cleaning and/or Hydro testing is not feasible. CETCO has in inventory Tandem sets of Filter/Seps, that allows uninterrupted flow, NO DOWN TIME to change out filter ...
-
Liquid Service Filtersep
Liquid ServiceFiltersep is unique to the service industry. They allow the customer to pig their line and capture ALL DEBRIS, Also, with tandem sets of filters. Our customer will have NO interruption of flow due filter element change out. CETCO can provide any specific filter element down to 5 – ...
-
Manifolds
In many projects variety of fluids are moved to many different locations at various times. Manifolds and piping provided by CPS are more than sufficient to ease the situation’s complexity and housekeeping issues. We can provide many sizes of manifolds with varying valve descriptions that are more than capable of handling any pressures or ...
-
Research and Testing Laboratory Services
CETCO Oilfield Services Company's commitment to research and development has helped make us a leader in water treatment. Our extensively equipped laboratory and team of scientists provide innovative products and wastewater treatment programs for industrial, municipal, pipeline, and oil production wastewater. Based on our evaluation of each customer's wastewater, we provide efficient and cost-effective treatment options using our specialized line of ...
-
Water Treatment Service
CETCO Oilfield Services Water Treatment Division specializes in the removal of hydrocarbons, solids, toxic materials and other contaminants from oilfield wastewater streams produced during oil and gas operations, transportation, and storage. CETCO Oilfield Services Company"s highly trained personnel optimize equipment and technologies to ensure our customers remain compliant with overboard water quality regulations while reducing waste disposal ...
-
Produced Water Service
CETCOMONARCH is the capital equipment sales arm made possible through an exclusive licensing agreement with Monarch Separators Inc. We offer integrated design, engineering, and manufactured equipment by CETCOMONARCH for oilfield and industrial oil/water separation and de-oiling ...
-
Industrial Wastewater Service
CETCO Oilfield Services wastewater treatment is a comprehensive line of quality products and services aimed at meeting performance requirements consistently and cost-effectively. Our trusted RM-10® line of bentonite clay-based products, liquid flocculants, coagulants, filtration media, and solidification and stabilization agents contain non-hazardous sodium bentonite clay, minerals, polymers, and other proprietary ...
-
Intervention Services
CETCO’s Intervention Services product line, can be used across a wide range of applications that require fluid transfer and/or injection at variable pump rates and pressures. The highly flexible fluid injection system integrates bulk and multi-line NAS filtration for the most “solid” sensitive applications. The system is designed with the offshore application in mind and features a compact footprint and Class I/Div I ...
-
Well Testing Services
-
Well Testing Services
CETCO Well Testing Service provides safe, customized and dependable well testing and blowout flow control for the oil and gas industry for both onshore and offshore applications. With well-designed equipment and innovative technology, we deliver complete well testing solutions and effective operations in all testing ...