Crushing Tech S.r.l

9 products found

Products

  • All Mulcher TRX

  • Model TRX - Mulcher

    Model TRX - Mulcher

    The TRX is a universal shredder designed and built to perform multiple jobs.  Its versatility lies in: reclaiming and crushing superficial stones and rocks, limestone and granite in olive groves, vineyards shredding pruning, branches, grass, bushes, stubble to prevent forest fires, cleaning brushwood etc. .. making arable beds land , ski slopes, restoring roads and restore surface pipeline etc .. The tools used are the peaks and the transmission...

  • Crusher

  • superficial - Model FPR – S - Crusher

    superficial - Model FPR – S - Crusher

    The FPR-S is a crusher with picks able to claiming cultivable and unclutivable ground at a working depth from about 100 to 200 mm with tractor supplied with creep gear. The transmission is with chains.

  • media - Model FPR – M - Crusher

    media - Model FPR – M - Crusher

    The FPR-S is a crusher with picksable to claiming cultivable and unclutivable ground at a working depth from about 150 to 250 mm with tractor supplied with creep gear. The transmission is with chains.

  • Model FPR – P - Crusher

    Model FPR – P - Crusher

    The FPR-S is a crusher with picksable to claiming cultivable and unclutivable ground at a working depth from about 250 to 500 mm with tractor supplied with creep gear.  The transmission is with chains.

  • Other Products

  • Model SCD - Rock Wheel Disk Digger

    Model SCD - Rock Wheel Disk Digger

    The Disk digger is an implement able to to dig canals into the ground or in rocky lands.It is linked to the three points of the tractor and driven by the PTO shaft.  It is mainly used for irrigation pipes, drainage and different plantations.

  • Vibrotiller - Model VT - Spring Cultivators

    Vibrotiller - Model VT - Spring Cultivators

    The VT are spring cultivators ideal for superficial ploughing going from 100 /150 mm of depth on stony lands and not. They are mainly used in wine yards, orchards and for preparing seeding bed and grass.  The anchors can be mounted at two, three or  four rows.

  • Model RIP - Hydrolic Subsoiler

    Model RIP - Hydrolic Subsoiler

    The RIP is an universal implement able to cope any difficulty of ploughing and reclaiming in hard soil with or without stones, without undergoing any kind of breakage till a depth of about 500 mm. It is made of a frame on which are linked the anchors connected to a pressure accumulator by means an hydraulic cylinders.

  • Model ASL  - Stones Windrower

    Model ASL - Stones Windrower

    The ASL is able to collect stones in rows spaced about every 6 / 8 meter reducing time and costs for the crushing and reclaiming stony lands. it is linked to the three points of the lift and driven by a drive shaft with clutch. The ASL is particularly suggested on flint,round and river stones in order to reduce the wearing of the hammers type special increasing the crushed surface.

  • Model TIP  - Tiller Hydropneumatic Cultivator

    Model TIP - Tiller Hydropneumatic Cultivator

    The TIP is an hydropneumatic cultivator No-Stop able to afford any difficulty of farming, ploughing and reclaiming on hard lands with stones and bushes, without undergoing any breakage of any kind at a depth of 200 / 300 mm. It is made of a frame on which are linked the anchors connected by hydraulic cylinders to an accumulator of pression. The TIP can be used with chisel ploughshares for getting more depth or large ploughshares for getting more...