Davies Implements Ltd

42 products found

products

  • C-Dax - Model ATV mounted - Fertiliser spreader

    C-Dax - Model ATV mounted - Fertiliser spreader

    The C-Dax SpreadMaster is a versatile general purpose 12-volt broadcast spreader that is suitable for a wide range of spreading and seeding applications. Features a simple and effective shutter system with delivery rate and spread centering controls. With a 70 litre capacity and a spread width of 15m (based on Urea at 10kph) the SpreadMaster ensures you can get your job done quickly and efficiently. Easily attached to your flat deck vehicle, or ATV using...

Products by Dragone

  • Sprayers

  • Dragone - Model K1/K2 - Sprayers

    Dragone - Model K1/K2 - Sprayers

    This sprayer has been conceived for Vineyards and orchard. Good vertical distribution on each side.Peculiarity  Dual fan and double intake with tower conveyor.

  • Dragone - Model AZ Series - Sprayers

    Dragone - Model AZ Series - Sprayers

    Long throw sprayer with swinging air outlet fit for greenhouse, high stock trees and nursery. Sprayer with cannon head for tractors with power till 60 Hp.

Products by Teagle Machinery Ltd

  • Tomahawks- Bale Processor

  • Fertiliser Spreaders

  • Teagle  - Model 8  - Compact  Fertiliser Spreader

    Teagle - Model 8 - Compact Fertiliser Spreader

    Our Spread Pattern has been developed so that when two adjacent bouts overlap, the total amount spread is even across the full bout width. With our system it is straightforward to drive at the correct bout width by ensuring that fertiliser is thrown just as far as the last set of tractor wheelings. No rotors to change, vanes to adjust or spread widths to set. Simply adjust the spread rate as described in the instruction book and you are...

  • Teagle - Model XT20  - Fertiliser Spreader

    Teagle - Model XT20 - Fertiliser Spreader

    Our Spread Pattern has been developed so that when two adjacent bouts overlap, the total amount spread is even across the full bout width. With our system it is straightforward to drive at the correct bout width by ensuring that fertiliser is thrown just as far as the last set of tractor wheelings. No rotors to change, vanes to adjust or spread widths to set. Simply adjust the spread rate as described in the instruction book and you are ready...

  • Teagle - Model XT24 and XT48 - Fertiliser Spreader

    Teagle - Model XT24 and XT48 - Fertiliser Spreader

    Choose a spreading system that naturally eliminates errors and produces outstanding results. Wind, driving errors and variation in fertiliser can combine to result in an uneven spread pattern. The gentle taper of the 'triangular' spread pattern produced by the XT24 and X48 distributes any error across the full width of the bout. Conversely, outward spinning systems typically produce a trapezoidal pattern which focuses errors in the lapped...

  • Teagle - Model SE Series  - Fertiliser Spreader

    Teagle - Model SE Series - Fertiliser Spreader

    Teagle promotes the quadruple overlap distribution system. This robust spreading pattern is incredibly tolerant to sources of inaccuracy such as wind, variation in fertiliser characteristics and driver error. Teagle offers a range of fertiliser spreaders that fulfils all European standards relating to accuracy of distribution and border spreading. The winning combination of the Accu Rate delivery system with a robust quadruple overlap...

  • Muck Spreaders

  • Grassland

  • Dynamo - Finishing Mower

    Dynamo - Finishing Mower

    Outstanding Performance: Overlapping rotors ensure 100% cutting over the full width to produce a high quality professional finish. Fit the optional mulching kit for a finer finish. Click here for more details.

  • Single Spindle Pasture Toppers

    Single Spindle Pasture Toppers

    All models incorporate a range of features to ensure ease of operation and maintenance.  Our Toppers incorporate high strength pressings and an impressive driveline and blade system resulting in a very robust machine. All machines built at our factory in Cornwall are now Shot Blasted and finished with Powder Coat paint for outstanding durability.

  • Belt Driven Pasture Toppers

    Belt Driven Pasture Toppers

    All models incorporate a range of features to ensure ease of operation and maintenance. Our Toppers incorporate high strength pressings and an impressive driveline and blade system resulting in a very robust machine.  All machines built at our factory in Cornwall are now Shot Blasted and finished with Powder Coat paint for outstanding durability.

  • Flail Mowers & Forestry Mulchers

  • Mini-Garden Flail Mower

    Mini-Garden Flail Mower

    Available in three cut widths from 1.15m, 1.25m, 1.45m. Suitable for mulching light grass and general amenity areas. From 12HP to 25HP / Category 1 linkage . PTO speed 540 rpm. Rear mount only

  • Swath Conditioners

  • Super-Ted - Swath Conditioners

    Super-Ted - Swath Conditioners

    Engineered specifically for the heavy crops found in the UK, our attention to detail delivers unparalleled performance in the field in both grass and straw applications. The Super-ted 160 has a 1.6m. wide pick-up and is ideal for silage, straw from smaller combines (up to 16' header width) and hay. The Super-ted 221 has a 2.2m. wide pick-up and is suitable for silage (will do two 3m. swaths side by side), straw from all modern combines and hay.

  • Tillage & Cultivation

  • Roterra  - Power Harrow

    Roterra - Power Harrow

    Medium duty - 25 Series : 2.5m working width. Heavy Duty - 35 series : 3m and 4m working width. Very Heavy Duty - 55 series - 3m and 4m working width. Models rated from 100HP to 200HP / Category 2 linkage .  Compact combination unit when fitted to Polymat Pneumatic Drill

  • Multidisc - Disc Harrow

    Multidisc - Disc Harrow

    Multidisc - Heavy Duty : 510mm disc diameter. Multidisc XXL - Very Heavy Duty : 610mm disc diameter.  Models rated from 70HP upwards / Category 2 & 3 linkage . Available with optional Polymat Compact Pneumatic Drill. Hydraulic folding options available up to 12m

  • Multidisc Vario - One-Pass Cultivator

    Multidisc Vario - One-Pass Cultivator

    Vario 250 - 2.5m working Width - 4 tines. Vario 300 - 3.0m Working Width - 6 tines. Models rated from 100HP to 200HP / Category 2 linkage . Available with optional Polymat Compact seed drill

  • Polymat  - Pneumatic Drill

    Polymat - Pneumatic Drill

    Polymat universal metering device for Cereals and Prilled Seeds, hopper capacity of 820 litres. The metering unit is fully adjustable and has a reduction setting for the use of fine seeds. A cleaning brush is supplied as standard. The seeds are dropped into the air flow and transported via a specially shaped evevation column, then distributed evenly to the tubes by the distribution head. Output rate of 1 to 360 kg/ha (Peas and Beans approx. 450 kg/ha)...

Products by Albutt

  • Agricultural

  • Albutt - Bag Filling Bucket

    Albutt - Bag Filling Bucket

    Use with any telehandler or loader. Fill up to 40 bags per hour. No spill design keeps your yard clean and reduces waste. Hydraulically operated doors. Fill bags with; sand, aggregate, topsoil, wood bark and any free flowing material. Fill trailers and vans with precise control. Stack bags after filling. Load filled bags onto trailers and trucks. Bags secured on hangers, remove bags without operator leaving machine cab. Heavy duty design with direct...

  • Albutt - Model BL - Bag Lift Telehandlers

    Albutt - Model BL - Bag Lift Telehandlers

    Heavy duty design. Lifts 600kg and 1000kg bags. See chart above . One, two or four bag models . Brackets included. Arm spacings for BL4-600 & BL4-1000 are different. Complete with test certificate and CE marked. New model to lift - 4 x 1000 kilo bags

  • Albutt - Model A0 - Rehandling Bucket

    Albutt - Model A0 - Rehandling Bucket

    Removeable side plates. Cutting edge - 500 Brinnel. Corner wearpads to underside - 500 Brinnel. Heavy duty power grab with Hardox tines. Wide opening grab 1774mm. Brackets for telehandler our loader included

  • Albutt - Model B - Standard Duty Buck Rake

    Albutt - Model B - Standard Duty Buck Rake

    Supplied with 3 point link brackets. Supplied with 4 side tines. Telehandler brackets extra (bolt on). Fitted with flow divider valve. Fitted with flow control valve. Twin hydraulic rams, push at side if gate to prevent gate twisting. Fork has open back to prevent build up of grass in gate mechanism. Forged steel tines 55' (1400mm), mounted in bushes welded into box section. Heavy duty box section 100mm x 100mm x 10mm. Tine guard - optional extra....

  • Forestry

  • Albutt - Model DB - Dozer Blade

    Albutt - Model DB - Dozer Blade

    Heavy duty specification. High tensile steel body - 'Domex'. Hardened cutting edge 500 Brinell. Complete with brackets. Complete with parking legs. Bump stops. Manual or hydraulic angle control (30 degrees) to both sides. Ideal for grading tracks and roads

  • Model LG500 - Heavy Duty Timber Grab

    Model LG500 - Heavy Duty Timber Grab

    Hardox fork tines - welded. One piece grab. Ideal for bundles of cut timber. Handles green waste and tree stumps. Smallest log dia - 6 x 325mm. Largest log dia - 1 x 800mm. Opens to 1684mm. Twin hydraulic rams

  • Model LG1000 - Log Splitter

    Model LG1000 - Log Splitter

    10.0 tonnes force. Three point linkage (Cat 1 & 2). Hardox splitting edge. Auto ram return. Non slip splitting table. Protected hydraulic ram.Anti burst hoses. Two handed operation - for safe operation .

  • Site Pro  - Model WR - Heavy Duty Grapple & Rake

    Site Pro - Model WR - Heavy Duty Grapple & Rake

    Tines intermesh when closed. Notched tines for additional grip. Move wood, roots, waste without picking up soil. Seperate loose material.To suit telehandler and loader complete with brackets.

Products by Bilke / Lehtoniemen Metalli Oy

  • Bilke - Model S3 - Firewood Processor

    Bilke - Model S3 - Firewood Processor

    Thanks to an automatic feed system, you do not need to support the stem while feeding it. Easily movable conveyors, a wide output conveyor and redesigned blade ensure comfortable use. Working with Bilke S3 Firewood Processor is both easy and safe.

Products by Maaselän Kone Oy

  • Firewood Processors

  • Hakki Pilke - Model Easy 50 - Firewood Machine

    Hakki Pilke - Model Easy 50 - Firewood Machine

    The purpose of this manual is to ensure that the machine is used in the manner intended by the manufacturer with regard to safety. Every person operating the machine or working in close proximity to it must carefully study this manual. Operators of the machine are expected to have basic skills in tractor handling, such as utilising the cardan shaft drive and the tractor's lifting equipment. Before commencing work, operators must also familiarise...

  • Hakki Pilke - Model Easy 42 - Firewood Machine

    Hakki Pilke - Model Easy 42 - Firewood Machine

    The machine can be used to cut and split wood with a diameter of over 40 cm. Thanks to the patented two-cylinder technology, firewood can be made effectively even from the smallest of trunks. The splitting power automatically varies between 3 and 13.2 tonnes, which means that when splitting slim wood, the machine operates faster and with less power, which makes it an effective choice for both large and small logs. This feature makes the Hakki Pilke...

  • Model 38 Pro - Firewood Machine

    Model 38 Pro - Firewood Machine

    Hakki Pilke 38 Pro brings unparalleled efficiency to firewood processing. An effortless, ergonomic and efficient HakkiCutTM cutting control enables sawing with a single press of a joystick button. During cutting, the lowering speed of the saw bar is automatically adjusted according to the resistance, ensuring an efficient and fast process. At a splitting force of 10 t, the 38 Pro can split even...

  • Hakki Pilke - Model Expert 37 - Firewood Machine

    Hakki Pilke - Model Expert 37 - Firewood Machine

    The Hakki Pilke Expert 37 firewood processor is excellent for professional use but is also a great option for demanding domestic use or as a shared machine when making larger amounts of firewood. Even though the machine only needs 7.5 kW of power and weighs just 710 kg, it can be used effectively to split trunks almost 40 cm thick. Since the speed of the machine is automatically adjusted according to the size of the trunks, this exceptional power is...

  • Hakki Pilke  - Model Falcon  - Firewood Processor

    Hakki Pilke - Model Falcon - Firewood Processor

    Hakki Pilke Falcon is the latest firewood processor in the Hakki Pilke family. In terms of its features, it is largely similar to its predecessor, the wildly popular Hakki Pilke 37 firewood processor. In its class, the machine boasts the fastest splitting on the market by far. Thanks to the hydraulic functions (saw and conveyors), the machine has no V-belts. The ergonomic one-hand control level makes the machine very easy and effortless to use....

  • Hakki Pilke  - Model 30 - Firewood Machine

    Hakki Pilke - Model 30 - Firewood Machine

    When the Hakki Pilke 2X was launched fifteen years ago, it was the first firewood processing machine with a chain saw. The Hakki Pilke Expert 30 firewood machine sold today has been developed in a myriad of ways based on user feedback, and it is a powerful and easy-to-use solution for domestic use. With the Easy equipment option the 2X is also suited for professional use. The excellent productivity of the Hakki Pilke Expert 30 firewood machine is...

  • Fodder Wagons

  • Varmolift Farmer - Fodder Wagons

    Varmolift Farmer - Fodder Wagons

    Agile truck that can carry out a high level of work in a short time. Fodder wagon Varmolift Farmer requires little power and operates on simple durable hydraulic functions. Fodder wagon Varmolift Farmer processes fine-shredded and even frozen fodder without blockages.

  • Varmolift Double - Fodder Wagon

    Varmolift Double - Fodder Wagon

    Fodder wagon Varmolift Double is a model equipped with a bogey which distributes two bales of fodder at a time Simultaneous cutting and distributing. Fodder wagon Varmolift Double has hydraulic steering in all models. Fodder wagon Varmolift Double has lLow power demand and simple hydraulic functions. Processes fine-shredded and even frozen fodder without blockages.