Dondi S.p.A.

11 products found

Products

  • Rotary Ditchers

  • Double-Wheel Rotary Ditchers

    Double-Wheel Rotary Ditchers

    DONDI double-wheel rotary ditchers offer the highest level of technology and performance for digging nd maintaining drainage and irrigation ditches. They can be used on any wheeled tractor with creep speeds of 0.4 / 0.6 for digging new ditches, while a higher advancement speed of up to 1.2 Km/h can be used for simple maintenance work. The standard digging angle is 32'. and digging angles of 18% 20% 23°. 42s are available on request in order to...

  • Special Double-Wheel Rotary Ditchers

    Special Double-Wheel Rotary Ditchers

    DONDI double-wheel rotary ditchers offer the highest level of technology and performance for digging and maintaining drainage and irrigation ditches. They can be used on any wheeled tractor with creep speeds of 0.4/0.6 km/h for new ditches, while a higher advancement speed of up to 1.2 km/h can be used for simple maintenance work. The standard digging angle is 32°, and digging angles of 18°, 20°, 23°, 42° are available on request...

  • Subsoilers and Trolley

  • Mega  - Deep Subsoilers

    Mega - Deep Subsoilers

    They are mounted subsoilers suitable for high-power tractors and are able to work up to 70 cm depth. The very high clearance (115 cm) ensures a perfect flow of soil even with a lot of residues, preventing any clogging. The tines have a high-resistance pull-bolt safety device to protect the machine and the tools against shocks and overloads. They can be combined with different kind of hydraulic rear rollers, depending on the type of soil and the...

  • Model 700 and 800 - Subsoilers

    Model 700 and 800 - Subsoilers

    This machine is particularly suited to replace plowing, since it can handle work at depths of up to 50/60 cm, with a working width that makes the use of subsoilers one of the most cost-effective systems available today. The special 45-degree inclination of the anchor makes the DONDI subsoiler efficient for rapid soil penetration and cost-effective because it significantly reduces traction effort through easy passage of the soil on the anchor, while...

  • Dondi - Cultivators and Minimum Tillage

  • Dondi - Model MAXI  - Combined Cultivators

    Dondi - Model MAXI - Combined Cultivators

    Following long-standing experience next to its users, Dondi presents a machine that meets all the needs associated with conservative tillage. The machine has been designed with a modular structure featuring three separate sections: the core is the cultivator with three rows of teeth that performs an optimal mixing of the soil with harvest residues, thereby increasing its fertility, improving the water balance and protecting it from erosion. The front...

  • Dondi - Model BIG  - Combined Cultivators

    Dondi - Model BIG - Combined Cultivators

    Equipment used for multiple applications at medium depth (25-35 cm) thanks to multi-ballast cultivators combined with front disc sections and various rear finishing accessories. This kind of system allows  to cut and make residues penetrate into the soil with the front disc section, which can operate at a depth of 10-15 cm;

  • Dondi - Foldable Three-Rows Cultivators

    Dondi - Foldable Three-Rows Cultivators

    These are cultivators for very powerful tractors. They have a foldable frame with two sections featuring an operating length from 4 to 6 metres. They are fitted with elastic ballasts with two leaves (55x25 + 55x20) equipped with a third reinforcement leaf (55x20) applied on the fixing bracket to prevent any breakages in the event of considerable stress during tillage. The hinges where the sections tip over have cemented steel bushes. The cultivator...

  • Disk Sections for Combined Equipment

    Disk Sections for Combined Equipment

    Equipment suitable to be applied at the front of any kind of cultivator to create a combined machine with several applications and till the soil at a depth of about  10-15 cm. Plus, if necessary, if prevents tillage residues from building up. The disc elements are mounted on sturdy supports with bearings fitting with conical rollers and have independent disc-scrapers. The equipment can also be applied on the tractor's front lifter to level the...

  • Essentials

  • Rear Scrapers

    Rear Scrapers

    Machine complete with lateral guards for dragging the material to be leveled. Interchangeable steel cutting edge. Double press-bent sheet-metal body.

  • Post Hole Diggers

    Post Hole Diggers

    Equipment used to create vertical holes in the ground with various diameters, from 15 cm to 100 cm and at a depth until to 150 cm. The drive is ensured by a cardan shaft with a safety bolt. All the tips have interchangeable blades. There are various types of machines: a model for holes from 15 cm to 40 cm without a rotation reverser; a model for holes from 15 cm to 60 cm without reverser or with mechanical or hydraulic control rotation reverser; a...

  • Road Maintenance Machines

  • Broad Movement Ditchers

    Broad Movement Ditchers

    Broad movement mono-wheel, mono/double-wheel ditchers. A device for digging and maintaining ditches to the side of tractor. During transport, the doitcher is carried in avertical position. It is possible also to supply just the side-mount device, to which any type of ditcher or mower can be attached. Motion transmission is by cardan shaft.