15 products found

products

  • Other Products

  • Augers

    Augers

    Drive shaft 65mm round, screw type Typ S 4.diameter: 100mm, 150mm, 200mm, 225mm, 250mm, 300mm, 350mm, 400mm, 450mm, 500mm.drive shaft 75mm square, screw type Typ S 5.diameter: 150mm, 200mm, 225mm, 300mm, 350mm, 400mm, 450mm, 500mm, 600mm, 750mm, 800mm

  • Gripper

  • Standard  - Gripper

    Standard - Gripper

    Our standard grapple is the linchpin, which is in some ways the flagship of the range. Its twin cylinders* provide low and even shaft loading, which means less wear. The design of the claws allows the logs to roll in gently, fills the grapple efficiently, and ensures that the load stays in place. This grapple works quickly and easily with all types of material.

  • Heavy-Duty Grapple

    Heavy-Duty Grapple

    HeavyDuty is the name of our most powerful grapple, and is designed for heavy lifting and tough jobs, making it particularly suitable for clear-cutting forwarders, etc. The steel plates are thicker, the rotator plate is larger, the lower boom tubes are reinforced, which combine to make the HeavyDuty our strongest grapple.

  • Hydraulic Tree Shears

  • HBS  - Model 230 S - Hydraulic Tree Shears

    HBS - Model 230 S - Hydraulic Tree Shears

    The shears, which feature a simple, sturdy frame into which the blades and blade cylinders are fitted, speak for themselves. The blades, made from a high-strength alloy with a Brinell hardness of 400 HB, are easy to exchange by simply removing the bolts. The bearing units can be removed and reused.An Automatic Gripper Function (AGF) is part of the standard equipment.The AGF allows the shears to be...

  • HBS  - Model 300 S - Hydraulic Tree Shears

    HBS - Model 300 S - Hydraulic Tree Shears

    The shears, which feature a simple, sturdy frame into which the blades and blade cylinders are fitted, speak for themselves. The blades, made from a high-strength alloy with a Brinell hardness of 400 HB, are easy to exchange by simply removing the bolts. The bearing units can be removed and reused.An Automatic Gripper Function (AGF) is part of the standard equipment.The AGF allows the shears to be...

  • Model HBS 350 S - Hydraulische Baumschere

    Model HBS 350 S - Hydraulische Baumschere

    With HBS 350 can easily be cut whole trees up to a diameter of 35cm and stored. The stable running cutting body ensures clean cuts and assumes an additional supporting function. The optional turntable significantly increases the effectiveness of pliers because the excavator when tilted trees or branches can be taken easily separated. Furthermore, it is possible for them, the precipitated material in parallel store next to the excavator.

  • HBS  - Model 450  - Hydraulic Tree Shears

    HBS - Model 450 - Hydraulic Tree Shears

    Our largest tree shears were developed specifically for large excavators with an operating weight of approx. 15 mt and up.With the HBS450, trees with a 45 cm diameter can be safely cut and lowered.The blade housing also functions as a bottom support to prevent the tree from moving sideways on the blades.An optional live ring is available to provide greater flexibility of use

Products by Hassela Skogsprodukter AB (HSP)

  • Standard - Twin Cylinders Grapple

    Standard - Twin Cylinders Grapple

    Our standard grapple is the linchpin, which is in some ways the flagship of the range. Its twin cylinders* provide low and even shaft loading, which means less wear. The design of the claws allows the logs to roll in gently, fills the grapple efficiently, and ensures that the load stays in place. This grapple works quickly and easily with all types of material.

  • Heavy Duty Grapple

    Heavy Duty Grapple

    HeavyDuty is the name of our most powerful grapple, and is designed for heavy lifting and tough jobs, making it particularly suitable for clear-cutting forwarders, etc. The steel plates are thicker, the rotator plate is larger, the lower boom tubes are reinforced, which combine to make the HeavyDuty our strongest grapple.

  • Maximise Forest Yield Bio Grapple

    Maximise Forest Yield Bio Grapple

    The Bio model has been specifically designed for quick, easy handling of slash and waste material, parts of trees and other material that is to be chipped for BioFuel, either directly into chippers during felling, or later from a stockpile. The grapple uses the same basic components as the Standard model, but has reinforced boom tubes and twice the material thickness in the claws. It also has mechanical end stops, which prevents the cylinders from...

  • Terminal - Timber Handling Grapple

    Terminal - Timber Handling Grapple

    Our Terminal grapples have been developed for handling large quantities of logs at sawmills, log terminals, harbors and the like. Its sturdy design tailored to customer needs makes the grapple not only perfect and easy to handle but also safe and reliable. The Terminal grapple closes tip-to-tip and has double chains securing the load in place even if not fully loaded.

  • Terminal - Model LB - Heavy Lifting Grapple

    Terminal - Model LB - Heavy Lifting Grapple

    A technical further development of our normal Terminal grapples with the same high performance but in low-built (LB) design for extra lifting height. The Terminal LB is intended for the efficient handling of large volumes. It is basically a large HeavyDuty (HD) version with its overlapping claws and excellent log handling properties.

  • Widest Opening Construction Grapple

    Widest Opening Construction Grapple

    The Construction is our premium grapple, which probably opens wider than any other grapple. It is designed to be mounted on an excavator, and has a unique stand that uses heavier plate, bent in one piece, and no welded side pieces. The load retention valve* and piston accumulator* are installed inside the stand, integrated with the hydraulic system. Construction can do heavy lifting, and is extremely stable at the same time.

  • Sawmills Industry Grapple

    Sawmills Industry Grapple

    The Industry model has been specially designed for the sawmill industry, but can also be installed on other applications. Industry has three claws, for easy separation and grasping of single logs. Industry features low profile design, it is wider and thus more stable, without compromising ease of operation.

  • V-Shape Sort Timber Grapple

    V-Shape Sort Timber Grapple

    The V-Shape is similar to our standard grapple, and has been specially designed to make fine sorting easier. Ground contact is minimised, using a V-Shape. Since the tip of the claw is centred, force distribution is not affected and the risk of uneven loading is eliminated in practice.