Eijkelkamp Soil & Water

13 products found

Eijkelkamp Soil & Water Products

  • Field Measurement Equipment

  • ThetaProbe - Model ML3 - Soil Moisture Measuring Sensor Set

    ThetaProbe - Model ML3 - Soil Moisture Measuring Sensor Set

    Soil moisture sensor Thetaprobe ML3. Measuring range 0-50% vol. Accuracy +/- 1%. With 4 pins, length 60 mm, Ø 3.2 mm. Output signal 0-1 Vdc. Inclusive temperature meter range -20...+60 °C, accuracy +/- 0.5 °C over 0...40 °C. Exclusive cable. Warranty 5 years.

  • Model 14.04.03 - Standard Tensiometer

    Model 14.04.03 - Standard Tensiometer

    The standard tensiometer consists of a clear transparent plastic tube with a ceramic cup at the bottom end and a manometer at the top. The standard tensiometer is delivered in various lengths allowing the execution of simultaneous measurements at various depths in the root zone. For pre-drilling special auger sets can be provided.

  • Eijkelkamp - Model 14.04.04 - Jet-Fill Tensiometers

    Eijkelkamp - Model 14.04.04 - Jet-Fill Tensiometers

    The Jet-fill tensiometer basically has the same components as the standard tensiometer but is equipped with a reservoir and a refill mechanism. At a push of the button the Jet-fill mechanism instantly injects water from the reservoir into the body of the tensiometer and removes accumulated air. This tensiometer can be provided in different lengths as well.

  • Eijkelkamp - Model 14.04.05 - Quick Draw Tensiometer

    Eijkelkamp - Model 14.04.05 - Quick Draw Tensiometer

    The quick draw tensiometer is a small tensiometer that can easily be moved and, using the auger for pre-drilling, placed into the soil. The small diameter and the super porous ceramic cup and the possibility of pre-setting the tension, allow a measuring period of only a few minutes. After each measurement the tensiometer can be stored in a carrier cylinder in which it is kept humid allowing immediate use in case of a next measurement.

  • Eijkelkamp Watermark - Model 14.27 - Soil Moisture Measuring System

    Eijkelkamp Watermark - Model 14.27 - Soil Moisture Measuring System

    Soil moisture sensors that measure the moisture tension in the soil are read out with the soil moisture meter Watermark. The measuring principle is similar to that of the gypsum block system. The special sensors however do not dissolve in the soil and have a more consistent distribution of pores so that more accurate measurements are possible.

  • Eijkelkamp - Model 14.26.82.04 - Soil Moisture Profile Probe, 40 cm

    Eijkelkamp - Model 14.26.82.04 - Soil Moisture Profile Probe, 40 cm

    The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 4 measuring elements with a measuring range of 40 cm, so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a measuring volume of ± 1.5 litres at each profile...

  • Eijkelkamp - Model 14.26.82.06 - Soil Moisture Profile Probe , 100 cm

    Eijkelkamp - Model 14.26.82.06 - Soil Moisture Profile Probe , 100 cm

    The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are  installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a measuring volume of ± 1.5 litres at each...

  • Eijkelkamp - Model 14.26.02 - Soil Moisture Meter

    Eijkelkamp - Model 14.26.02 - Soil Moisture Meter

    Soil moisture meter to read out the Thetaprobe, the W.E.T. sensor, the profile probe and the SM300 soil moisture sensor. With 25-way D socket. Inclusive operating instructions, PC software and RS 232 cable.

  • Delta-T - Model SM150 - Soil Moisture Sensor

    Delta-T - Model SM150 - Soil Moisture Sensor

    Soil moisture sensor SM150, measuring range 0...70% volume soil moisture. Accuracy +/- 3%. Measuring range temperature 0...-60 °C, accuracy 0.5 °C. With 2 measuring pins, length 51 mm. Output signal 0-1 Vdc. M12 connection, exclusive cable. Warranty 5 years.