13 products found

Products by Case IH - a division of CNH Global

  • Tractors

  • Farmall - Model 55A - Robust Practical Tractor

    Farmall - Model 55A - Robust Practical Tractor

    The open station Farmall 55A has been created to provide a robust practical tractor that is easy to drive for the small acreage farms or rural estates and has the ability to be used on a daily basis as the support machine for larger operations. The powerful rear PTO makes grass moving, tedding, or pasture topping a breeze. On larger livestock units, the tight turning 2 wheel drive and easy direction changes of the left hand shuttle make light work of...

  • Farmall  - Model C Series - Tractor

    Farmall - Model C Series - Tractor

    7 Models From 58 To 114 Hp; With an extensive range of factory options, including transmissions, hydraulic and PTO, and agricultural, turf or industrial tyres, Farmall C tractors can be delivered fully equipped and ready to work. In addition, cab versions can be customised with factory installed high performance anti-pollen filtration to suit the intended application.

  • Harvesting

  • Case IH  - Model 4400 Series - Corn Heads

    Case IH - Model 4400 Series - Corn Heads

    Case IH 4400 series corn headers offer excellent picking ability in both standing and down corn, increasing grain savings in all circumstance. What’s more, they offer unrivalled ease of servicing to ensure they are ready for work in no time at all, and perform in all harvesting conditions. The dividers are key to pick up layed crop or seperate tangled corn plants. They have a considerable influence on the result of the harvest. The narrow,...

  • Balers

  • Case IH - Model RB Series - Round Balers Variable Chamber

    Case IH - Model RB Series - Round Balers Variable Chamber

    Bale diameter from 90 to 150 or 180 cm .At Case IH we listen to our customers, because we want to keep them productive especially during harvesting. That’s why the two variable chamber round balers have new features that boost productivity and extend baler life.

  • Tillage

  • Case IH - Offset Disk Harrows

    Case IH - Offset Disk Harrows

    Case IH Heavy-Offset 790 offset disk harrows perform a wide array of soil-conditioning tasks with tough, long-lasting components. Two models are available, providing a range of disk blade width and spacing options.

Products by DuraTech Industries International, Inc./ Haybuster Agricultural Products

  • Bale Processors

  • Haybuster - Model 2564 - Balebuster - Bale Processor

    Haybuster - Model 2564 - Balebuster - Bale Processor

    Processing bales for erosion control, feeding or bedding cattle or poultry are tasks that the Haybuster 2564 Balebuster takes on with vigor and determination. The 2564’s newly designed fan, spouts and discharge conveyor combined with the Haybuster patented live floor in the bale chamber, heavy duty flail tube with 40 flails and the two stage bale loader, makes it the best processor for a multitude of jobs. For 30 years we have built Haybuster...

  • Haybuster - Model 2100 - Balebuster - Bale Processor

    Haybuster - Model 2100 - Balebuster - Bale Processor

    The 2100 Balebuster is semi-mounted, making it easy to maneuver and back into tight places. This semi-mounted unit transfers approximately 55% of the 2100's operating weight directly to the tractor, keeping the weight off the Balebuster.

  • Haybuster - Model 2650 - Balebuster - Bale Processor

    Haybuster - Model 2650 - Balebuster - Bale Processor

    Tractor hydraulic controls are located on the right side; the 2650's right hand discharge makes it easy to look over your right shoulder and keep your hand on the controls. Adjusting the deflector on the 2650 is a one handed operation. The latch requires only one hand because the torsion springs support the bulk of the deflector's weight, allowing you to set the deflector to the desired position with very little effort. The optional hydraulic...

  • Rock Pickers

  • Haybuster - Model EZE - 3106 - Rock Pickers

    Haybuster - Model EZE - 3106 - Rock Pickers

    The 3106 ROCK-EZE clears your fields of rocks sized from 2 (5.08 cm) to 15 inches (38.1 cm) in diameter. As you can see in the picture above, the 3106 can make a remarkable difference.

  • Seed Drills

  • Haybuster - Model 77C - Seed Drill

    Haybuster - Model 77C - Seed Drill

    Built for versatility, Haybuster’s 77C (7 feet) and 107C (10 feet) All Purpose drills can be used in no till, minimum till, conventional tillage, reclamation and for pasture rennovation. They are drills for all purposes in a convenient easy to use package. Now with heavy-duty cast linkages for even more durability.

  • Haybuster - Model 107C - Seed Drill

    Haybuster - Model 107C - Seed Drill

    Built for versatility, Haybuster’s 77C (7 feet) and 107C (10 feet) All Purpose drills can be used in no till, minimum till, conventional tillage, reclamation and for pasture rennovation. They are drills for all purposes in a convenient easy to use package. Now with heavy-duty cast linkages for even more durability.

  • Vertical Mixers / Cutter-Mixer-Feeder

  • Haybuster - Model CMF-430 - Vertical Mixer

    Haybuster - Model CMF-430 - Vertical Mixer

    At Haybuster, we put 40 years of hay and feed processing experience into our Cutter-Mixer-Feeders (CMF’s). Our engineers, with farm and cattle backgrounds designed them with input from dairy and beef growers throughout North America. Haybuster products are built with attention to durability, versatility and reliability. Compare our equipment to our competition and you will see the difference. Our CMF's are built heavier and stronger for long...

  • Haybuster - Model CMF-710 - Vertical Mixer

    Haybuster - Model CMF-710 - Vertical Mixer

    At Haybuster, we put 40 years of hay and feed processing experience into our Cutter-Mixer-Feeders (CMF’s). Our engineers, with farm and cattle backgrounds designed them with input from dairy and beef growers throughout North America. Haybuster products are built with attention to durability, versatility, and reliability. Compare our equipment to our competition and you will see the difference. Our CMF’s are built heavier and stronger for...