10 products found
Exa Pumps Srl Products
-
Submersible Pumps
We produce a full range of submersible pumps, MADE IN ITALY, from 4“ and 6″ with stainless steel casing up to 6″, 8″, 10″ and 12″ cast iron made (or bronze on demand). FP4: 4″ with stainless steel casing, with floating indipendent impellers, with a max head of 240m and a capacity of max 400 l/m. AP6: 6″ with stainless steel casing with noryl impellers and diffusers, head up to 840m and a capacity of 1100 l/m. FX6-8-10: mixed-flow pumps, with cast iron impellers and diffusers (bronze on demand). FR8: 8″ radial cast iron pumps, with stainless steel ties.
-
Model 4 Inch FP4 Series - Submersible Pumps
Submersible pumps of FP4 series are of new design, very solid and compact, easy to maintain. The supports, stainless steel AISI 304, obtained with wax casting process, ensure great robustness and reliability of the product. The new design of independent floating impeller, patented, guarantees a low axial load on the motor. The new materials used in the construction, certified for use in drinking water, allow the pump to run even dry without ...
-
Model 5 Inch Monoblock FEX5 Series - Submersible Pumps
The FEX5 submersible pumps series are designed to work in tanks or open wells or 5” borehole or bigger. The main feature is the hydraulic part is under the motor, to reduce the minimum pumping level and to cool better the motor in the tanks. The hydraulic part is traditional, with fixed plastic impellers and diffusers. The motor is Asynchrounous cooled by pumped liquid. As standard a double mechanical seal is installed with an interposed oil chamber ...
-
Model 6 Inch AP6 Series - Submersible Pumps
Designed for 6” wells, submersible pump of AP6 series is made of solid and sturdy construction and it’s easy to maintain. Bottom and top casing are generated from micro-casting steel AISI 304. Top casing is 3” threaded and the non-return valve is incorporated. As standard, up to 7.5Hp power the pump is supplied for connection to the 4″ motor (NEMA), from 10Hp to the motor 6″. To solve problems due to great pressures (40 bar), ...
-
Model 6 Inch FX6 Series - Submersible Pumps
FX submersible pumps series (for wells of a nominal diameter of 6″ – 8″ – 10″ – 12″) are cast iron made, of mixed-flow type. FX series have only one type of diffuser for each diameter. This allows easy management of disassembled pumps and spare parts. They also have the peculiarity of an hexagonal shaft type, for easy maintenance. The bushes are rubber made, coupled with thick chromed sleeves for a continuous ...
-
Model 8 Inch FRA8 Series - Submersible Pumps
FR submersible pumps series (for wells of a nominal diameter of 8″) are cast iron made and radial type, with external tie rods in stainless steel. FR series have two type of diffuser. This allows easy management of disassembled pumps and spare parts. They also have the peculiarity of an hexagonal shaft type, for easy maintenance. The bushes are rubber made, coupled with thick chromed sleeves for a continuous operating in hard conditions, ...
-
Model 8 FR8 Series - Submersible Pumps
FR submersible pumps series (for wells of a nominal diameter of 8″) are cast iron made and radial type, with external tie rods in stainless steel. FR series have two type of diffuser. This allows easy management of disassembled pumps and spare parts. They also have the peculiarity of an hexagonal shaft type, for easy maintenance. The bushes are rubber made, coupled with thick chromed sleeves for a continuous operating in hard conditions, ...
-
Submersible Motors
We have a full range of submersible motors. FMO4: 4″ rewindable oil filled sumbersible motors. FMW4 SS: 4″ canned water cooled sumbersible motor, complete in Stainless Steel. FMO6: 6″ rewindable oil filled sumbersible motor. FME6: 6″ rewindable water cooled sumbersible motor. FME8: 8″ rewindable water cooled sumbersible motor. FME10: 10″ rewindable water cooled submersible motor, with NEMA 8″ coupling.
-
Model 4 Inch FMO4 Series - Submersible Motors
Submersible motors of series FMO4 are asynchronous type, 2-pole with squirrel cage rotor, in oil bath, rewindable. They are very sturdy and oversized, to withstand heavy loads and last a long time even at great depths of immersion. The power cables are equipped with connection plug to be sure that the internal cooling liquid, even if alimentary and non-toxic, FDA approved, can not climb by capillarity along the line. A strong mechanical seal provides a ...
-
Model 4 FMW4 SS Series - Submersible Motors
The FMW4 series submersible is a water cooled motor, resinate. All parts in contact with water are in AISI 304 stainless steel. It ‘s asynchronous type, 2-poles, with 24-slot stator and squirrel cage rotor. The resin insulation, with replaceable cartridge, allows better cooling of motor and, in particular, better working with inverter. The power cable is equipped with a watertight plug, very useful in case of rapid replacement on installation site. ...
-
Model 6 Inch FMO6 Series - Submersible Motors
Submersible motors of series FMO6 are asynchronous type, 2-pole with squirrel cage rotor, in oil bath, rewindable. They are very sturdy and oversized, to withstand heavy loads and last a long time even at great depths of immersion. The power cables are equipped with connection plug to be sure that the internal cooling liquid, even if alimentary and non-toxic, FDA approved, can not climb by capillarity along the line. A strong mechanical seal provides a ...
-
Model 6 Inch FMW6 Series - Submersible Motors
FMW6 – FMW6SS series submersible motors are asynchronous type, 2-poles, with squirrel cage rotor. The wire wet windings are rewindables, in PVC or PE2 + PA, on request. The motors are very sturdy and oversized to withstand heavy loads and last a long time. Radial and the bearings, Mitchell type, lubricated by the water inside motor, allow a long period of operation without any maintenance. A mechanical seal, mounted on motor shaft as standard, gives ...