FSI power-tech aps

16 products found

Products

  • Hydraulic Stump Cutter Heads

  • Model FSI H20 - Hydraulic Stump Cutter for 30-50 l/min

    Model FSI H20 - Hydraulic Stump Cutter for 30-50 l/min

    FSI H20 is a stump grinder attachment for excavators, articulated mini loaders or similar machinery. The recommended excavator size is 1.5 - 2.5 t. The H20 is attached using a tool grip/coupling and the grinding movement is performed via the controls on the carrying machine. Includes hydraulic hoses and uncoated top plate to weld on the tool grip.

  • Model FSI H40 - Hydraulic Stump Cutter for 50-75 l/min.

    Model FSI H40 - Hydraulic Stump Cutter for 50-75 l/min.

    FSI H40 is a stump grinder attachment for excavators, articulated mini loaders or similar machinery. The recommended excavator size is 3 - 7 t. The H40 is attached using a tool grip/coupling. The grinding movement is performed via the carrying machine. Includes hydraulic hoses and uncoated top plate to weld on the tool grip.

  • Model ST27H - Hydraulic Stump Cutter Head

    Model ST27H - Hydraulic Stump Cutter Head

    Attachment for loaders and excavators 3-7 ton. Oil flow required 40-60 L/min. The cutter head can be turned 360° manual for better view, and safety ejection of the chips according to situation. Teeth 18 pcs. ø20.5mm, all turnable 3 times 120°.

  • Model ST20H - Hydraulic Stump Cutter Head

    Model ST20H - Hydraulic Stump Cutter Head

    Attachment for mini loaders and mini excavators 1,5-3 ton. Oil flow required 30-45 L/min. The cutter head can be turned 360° manual for better view, and safety ejection of the chips according to situation. Teeth 12 pcs. ø20.5mm, all turnable 3 times 120°.

  • Model ST27HS - Hydraulic Stump Cutter Head

    Model ST27HS - Hydraulic Stump Cutter Head

    Attachment for mini loaders etc. Electric remote control of 2 hydraulic cylinders swinging  the cutter head across the stump. Teeth 18 pcs. ø20.5mm, all turnable 3 times 120°.

  • Model ST50H - Hydraulic Stump Cutter Head

    Model ST50H - Hydraulic Stump Cutter Head

    Attachment for excavators 8-14 ton. Oil flow required 80-130 L/min. The cutter head can be turned 360° manual for better view, and safety ejection of the chips according to situation. Teeth 20 pcs. ø24.5mm, all turnable 3 times 120°.

  • Model ST65H - Hydraulic Stump Cutter Head

    Model ST65H - Hydraulic Stump Cutter Head

    Attachment for excavators 12-20 ton.Oil flow required 100-130 L/min. or Oil flow required 135-160 L/min. or Oil flow required 165-200 L/min. The cutter head can be turned 360° manual for better view, and safety ejection of the chips according to situation. Teeth 28 pcs. ø28.0mm, all turnable 3 times 120°.

  • Self-Propelled

  • Model FSI B20 - Self-propelled Stump Cutter with gasoline engine

    Model FSI B20 - Self-propelled Stump Cutter with gasoline engine

    FSI B20 is a compact and balanced stump grinder that can be used to grind down all types of tree stumps. The pivot joint between the stump grinder and the wheel axle ensures easy and smooth grinding, even under difficult conditions. The brakes can be applied individually to each wheel, so the machine can easily access the stump even if there are shavings in the way. The individual brakes can also be used to negotiate steps with ease.

  • Model FSI B22 - Self-propelled Stump Cutter with 2WD and Gasolin Engine

    Model FSI B22 - Self-propelled Stump Cutter with 2WD and Gasolin Engine

    Self-propelled means the user can move the machine with ease, both moving to and from the stump that is to be ground down and especially when moving the machine onto a trailer or lorry after use. The hydraulically driven wheels provide a top speed of 3 km/h. In contrast to the ST20B, the machine is equipped with a complete hydraulic system with tank, pump and engine. The actual stump grinding is executed by making small manual sideways movements of...

  • Tractors

  • Model FSI T25 - Stump Cutter for PTO 25-55 HP

    Model FSI T25 - Stump Cutter for PTO 25-55 HP

    FSI T25 is an ideal attachment for smaller tractors and similar machines with a PTO outlet. The frame and 3-point linkage (cat. 1) ensure stability during grinding. All movements are controlled via the joystick, the control box also has an option to adjust the speed of the swing movement. Includes joystick control, PTO shaft and hydraulic top link.

  • 3-Point Linkage PTO Driven Stump Cutters

  • Self Powered Stump Cutters

  • Model ST20B - Self Powered Stump Cutter

    Model ST20B - Self Powered Stump Cutter

    Walk behind, 13 HP petrol powered Honda GX 390 engine. Ergonomic use, cutter swinging on a turntable.2 brakes (left and right) can be used for twisting machine forwards and backwards when difficult access.All operations are remote controlled from the controle handle .Teeth 8 pcs. ø20.5mm, all turnable 3 times 120°.

  • Model B28-4702WD - Self Powered Stump Cutter

    Model B28-4702WD - Self Powered Stump Cutter

    28 HP petrol air cooled Subaru. Working width 1,35 m, transport width only 80 cm.Quick and safe start/stop with electromagnetic clutch..Full operation from control panel and a clear operator view.Options: LED light, twin wheels.Teeth 16 pcs. ø20.5mm, all turnable 3 times 120°.

  • Model D30-4702WD - Self Powered Stump Cutter

    Model D30-4702WD - Self Powered Stump Cutter

    30 HP diesel water cooled Kubota engine. Working width 1,35 m, transport width only 80 cm.Quick and safe start/stop with electromagnetic clutch.Full operation from control panel and a clear operator view.Options: LED light, twin wheels.Teeth 16 pcs. ø24.5mm, all turnable 3 times 120°.

  • Model D67-7204WD - Self Powered Stump Cutter

    Model D67-7204WD - Self Powered Stump Cutter

    67 HP diesel water cooled Lombardini engine. Working width 2,00 m. Radio remote control: Driving and cutting, high or low speed, diff lock, light, warning horn etc. Teeth 28 pcs. ø28.0mm, all turnable 3 times 120°.