13 products found
Gerhard Dücker GmbH & Co. KG Products
-
Uni-Mower
-
Dücker - Model UMT 10/13/15/18 - Uni-Mower
The compact construction of the universal usable mower-, mulcher- and crusher machines UMT makes them specially suitable for small tractors from 13 kW (18 HP) upwards. They are available in working widths of 1.0, 1.3, 1.5 and 1.8 meters. The versatile adjustment possibilities of the attachment point of the three-point hydraulic, enables the mounting of the unit onto every three-point ...
-
Uni-Sidemower
-
Dücker - Model SMT - Uni-Sidemower
The Uni-Sidemower is infinitely variable in its working adjustment, so that it is usable on the most difficult slopes and embankments. Due to the special construction of the unit, the mower-head at the front of the pulling vehicle can be swung, so that there is no visual obstruction for the drive of the vehicle. The Uni-Sidemower cleanly cuts all types of grass, from sea grass to reed grass. Even the care of leisure areas like sports grounds, camping ...
-
Dücker - Model USM 10/13/15/18/21/26 - Uni-Sidemower
The Uni-Sidemower USM operates as rear unit in the norm three-point hydraulic, offset next to the pulling unit. The Uni-Sidemower is infinitely variable in its working adjustment, so that it is usable on the most difficult slopes, embankments and ...
-
Verge Mower
-
Dücker - Model MGK 13 - Verge Mower
The Mower Device MGK 13 is designed as verge mower and reflector-post mower. The basic equipment is mounted to local carrier vehicles with hydraulic ...
-
Embankment Mower
-
Dücker - Model KBM 350 - Embankment Mower
The embankment mower KBM 350 is available as combinated unit for front and rear mounting on small trucks from 19 kW (25 HP) upwards. A rebuilding from front to rear mounting and working on right to working on left is ...
-
Dücker - Model MBM 400 - Embankment Mower
The embankment mower MBM is specially-designed for front-mounting on local carrier or tractor of the 80 HP-class (approx. 6 tons). The power of the working equipment be provided by in the device integrated hydraulic system, which is driven by the PTO-shaft, or the hydraulic system of the carrier vehicle will be used. The basic unit serve for taking up different working equipment. By the hydraulical drive the working equipment can work in front and next to ...
-
Flail Mowers
As side mowers or mowers for front or rear attachment: There is the matching device for any carrier vehicle and any purpose at Dücker.
-
Dücker - Model UMK 16/18/21 - Robust Mowing, Mulching and Chopping Unit
The robust mowing, mulching and chopping units of our UMK series are outstanding for use on tractors with 23 to 44 KW (30 to 60 HP) output. Working widths range from 1.60 m to 2.10 m. The UMK series is built as a rear-mounted unit, a front-mounted unit or a combined rear and front ...
-
Dücker - Model VMS 1200 - 2500 - Flail Mower
The flail mowers of the VMS series are designed for tractors from 22 KW (30 HP). Working widths range from 1.23 m to 2.53 m. The modular design of the VMS provides a high degree of flexibility in the design of the ...
-
Outrigger
Dücker outriggers – There is the right device for any carrier vehicle and any purpose. The different uses of the attachments ensure year-round use of the outriggers.
-
Dücker - Model MGK 13 - Edge Strip Mower for Municipal Carrier Vehicles
The edge-strip mower MGK 13 has been constructed as an edge strip and guiding post mower. The basic device is installed on municipal carrier vehicles with hydraulic drive. The work range is to the right or left of the vehicle. The device can be equipped with a flail mower head, either with a scanning automatic or with a manual control. A guiding post mower is available as an exchange unit for the mowing head. The max. reach from the vehicle centre is 2.30 ...
-
Working Equipment
The Dücker attachments for outriggers – different possible uses ensure year-round use of the outriggers.
-
Dücker - Model TMK 10/13 - Flail Mower Heads
The TMK 10 and 13 flail mower heads are particularly flat, at only 300 mm height. This permits work under crash ...
-
Dücker - Model MKL 10 - Flail Mower Heads
The MKL 10 flail mower head is equipped with light-weight flat flails. The mowing head can be switched from right-hand to left-hand ...
-
Branch Cutters
The Dücker branch and hedge cutters - for rational and preserving maintenance of woods and hedges. Slow-running shear blades ensure a clean cut for new growth.
-
Dücker - Model FVA 250 - Front-Loader Shifting Frame
The Dücker FVA attachment frames make it possible to use various branch cutters and free profile saws on front loader, telescopic loader and wheel loader holders. The FVA attachment frame has a hydraulic evasion device with a shift of up to 1.60 m. The attachments can be used working on the right or left. Attachment of the branch and hedge cutters to different lifting frames (e.g. front loaders or telescopic loaders), outrigger arms, ...
-
Hard Shoulder Milling Machines
-
Dücker - Model SBF 900 - Hard Shoulder Milling Machines
DÜCKER hard shoulder milling machines permit milling the hard shoulders and loading of the cut material in a single work step at a working width of 1.25 m. Additional screws expand the working width to 1.70 or 2.10 m and make work under and behind crash barriers easier. The attached sweeping brush cleans the road in the same work step. The SBF 900 hard shoulder milling machine is our self-propelled version. Travelling and milling take place fully ...